TPSMC6.8HE3_B/H [VISHAY]
Trans Voltage Suppressor Diode, 1500W, 5.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, SMC, 2 PIN;型号: | TPSMC6.8HE3_B/H |
厂家: | VISHAY |
描述: | Trans Voltage Suppressor Diode, 1500W, 5.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, SMC, 2 PIN |
文件: | 总5页 (文件大小:88K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TPSMC6.8 thru TPSMC47A
www.vishay.com
Vishay General Semiconductor
Surface Mount PAR® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
FEATURES
• Junction
passivation
optimized
design
passivated anisotropic rectifier technology
• TJ = 185 °C capability suitable for high reliability
and automotive requirement
• Available in uni-directional polarity only
• 1500 W peak pulse power capability with a
10/1000 μs waveform
DO-214AB (SMC)
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
PRIMARY CHARACTERISTICS
• AEC-Q101 qualified
VBR
6.8 V to 47 V
VWM
5.50 V to 40.2 V
1500 W
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PPPM
IFSM
200 A
TJ max.
Polarity
Package
185 °C
MECHANICAL DATA
Case: DO-214AB (SMC)
Molding compound meets UL 94 V-0 flammability rating
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
(“X” denotes revision code e.g. A, B, ..., revision code only
applicable for part number with 5 % tolerance)
Uni-directional
DO-214AB (SMC)
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
PPPM
IPPM
VALUE
1500
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (fig. 3) (1)(2)
Peak power pulse current with a 10/1000 μs waveform (fig. 1) (1)
Peak forward surge current 8.3 ms single half sine-wave (2)(3)
Maximum instantaneous forward voltage at 100 A (2)(3)
Operating junction and storage temperature range
See table next page
200
A
IFSM
A
VF
3.5
V
TJ, TSTG
-65 to +185
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads at each terminal
Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum
(2)
(3)
Revision: 22-Jul-16
Document Number: 88407
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TPSMC6.8 thru TPSMC47A
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
MAXIMUM
REVERSE
LEAKAGE
AT VWM
TJ = 150 °C
ID
MAXIMUM
PEAK
MAXIMUM
MAXIMUM
CLAMPING
VOLTAGE
AT IPPM
VC
TEST
CURRENT
IT
STAND-OFF
VOLTAGE
VWM
REVERSE
LEAKAGE
AT VWM
IR
BREAKDOWN
VOLTAGE
VBR (1) AT IT
(V)
DEVICE
MARKING
CODE
PULSE
DEVICE
TYPE
SURGE
CURRENT
(mA)
(V)
(2)
IPPM
(A)
(μA)
(V)
(μA)
MIN.
6.12
6.45
6.75
7.13
7.38
7.79
8.19
8.65
9
MAX.
7.48
7.14
8.25
7.88
9.02
8.61
10
TPSMC6.8
TPSMC6.8A
TPSMC7.5
TPSMC7.5A
TPSMC8.2
TPSMC8.2A
TPSMC9.1
TPSMC9.1A
TPSMC10
TPSMC10A
TPSMC11
TPSMC11A
TPSMC12
TPSMC12A
TPSMC13
TPSMC13A
TPSMC15
TPSMC15A
TPSMC16
TPSMC16A
TPSMC18
TPSMC18A
TPSMC20
TPSMC20A
TPSMC22
TPSMC22A
TPSMC24
TPSMC24A
TPSMC27
TPSMC27A
TPSMC30
TPSMC30A
TPSMC33
TPSMC33A
TPSMC36
TPSMC36A
TPSMC39
TPSMC39A
TPSMC43
TPSMC43A
TPSMC47
TPSMC47A
DDP
DEP
DFP
DGP
DHP
DKP
DLP
DMP
DNP
DPP
DQP
DRP
DSP
DTP
DUP
DVP
DWP
DXP
DYP
DZP
EDP
EEP
EFP
EGP
EHP
EKP
ELP
EMP
ENP
EPP
EQP
ERP
ESP
ETP
EUP
EVP
EWP
EXP
EYP
EZP
FDP
FEP
10
10
10
10
10
10
1
5.5
1000
1000
500
500
200
200
50
50
20
20
5
10000
10000
5000
5000
2000
2000
500
500
200
200
50
139
143
128
133
120
124
109
112
100
103
92.6
96.2
86.7
89.8
78.9
82.4
68.2
70.8
63.8
66.7
56.6
59.5
51.5
54.2
47
10.8
10.5
11.7
11.3
12.5
12.1
13.8
13.4
15
5.8
6.05
6.4
6.63
7.02
7.37
7.78
8.1
9.55
11
1
1
9.5
10.5
12.1
11.6
13.2
12.6
14.3
13.7
16.5
15.8
17.6
16.8
19.8
18.9
22
1
8.55
8.92
9.4
14.5
16.2
15.6
17.3
16.7
19
9.9
1
10.5
10.8
11.4
11.7
12.4
13.5
14.3
14.4
15.2
16.2
17.1
18
1
5
50
1
9.72
10.2
10.5
11.1
12.1
12.8
12.9
13.6
14.5
15.3
16.2
17.1
17.8
18.8
19.4
20.5
21.8
23.1
24.3
25.6
26.8
28.2
29.1
30.8
31.6
33.3
34.8
36.8
38.1
40.2
2
10
1
2
10
1
2
10
1
2
10
18.2
22
1
1
10
1
1
10
21.2
23.5
22.5
26.5
25.2
29.1
27.7
31.9
30.6
34.7
33.2
39.1
37.5
43.5
41.4
47.7
45.7
52
1
1
10
1
1
10
1
1
10
1
1
10
1
1
10
19
21
1
1
10
19.8
20.9
21.6
22.8
24.3
25.7
27
24.2
23.1
26.4
25.2
29.7
28.4
33
1
1
10
1
1
10
49
1
1
10
43.2
45.2
38.4
40
1
1
10
1
1
10
1
1
10
1
1
10
34.5
36.2
31.4
32.8
28.8
30.1
26.6
27.8
24.2
25.3
22.1
23.1
28.5
29.7
31.4
32.4
34.2
35.1
37.1
38.7
40.9
42.3
44.7
31.5
36.3
34.7
39.6
37.8
42.9
41
1
1
10
1
1
10
1
1
10
1
1
15
1
1
15
49.9
56.4
53.9
61.9
59.3
67.8
64.8
1
1
15
1
1
15
47.3
45.2
51.7
49.4
1
1
20
1
1
20
1
1
20
1
1
20
Notes
(1)
(2)
(3)
VBR measured after IT applied for 300 μs, IT = square wave pulse or equivalent
Surge current waveform per fig. 3 and derated per fig. 2
All terms and symbols are consistent with ANSI/IEEE C62.35
Revision: 22-Jul-16
Document Number: 88407
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TPSMC6.8 thru TPSMC47A
www.vishay.com
Vishay General Semiconductor
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY
DELIVERY MODE
TPSMC6.8AHE3_A/H (1)
TPSMC6.8AHE3_A/I (1)
TPSMC6.8AHE3_B/H (1)
TPSMC6.8AHE3_B/I (1)
0.211
0.211
0.211
0.211
H
I
850
3500
850
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
H
I
3500
Note
(1)
AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
100
150
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
TA = 25 °C
Non-Repetitive Pulse
Waveform shown in Fig. 3
tr = 10 µs
Peak Value
IPPM
10
100
50
0
Half Value -
IPP
2
IPPM
1.0
10/1000 µs Waveform
as defined by R.E.A.
0.31 x 0.31" (8.0 x 8.0 mm)
Copper Pad Areas
td
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
1.0
3.0
4.0
0
2.0
t - Time (ms)
td - Pulse Width (s)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 3 - Pulse Waveform
100
75
10 000
1000
100
VR, measured at
Zero Bias
VR measured at
Stand-Off Voltage, VWM
50
25
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
0
1
10
100
50
TJ - Initial Temperature (°C)
0
100
150
200
VBR - Breakdown Voltage (V)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 4 - Typical Junction Capacitance
Revision: 22-Jul-16
Document Number: 88407
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TPSMC6.8 thru TPSMC47A
www.vishay.com
Vishay General Semiconductor
200
TJ = TJ max.
8.3 ms Single Half Sine-Wave
100
50
10
1
5
10
50
100
Number of Cycles at 60 Hz
Fig. 5 - Maximum Non-Repetitive Peak Forward Surge Current
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AB (SMC)
Cathode Band
Mounting Pad Layout
0.185 (4.69) MAX.
0.246 (6.22)
0.220 (5.59)
0.126 (3.20)
0.114 (2.90)
0.126 (3.20) MIN.
0.280 (7.11)
0.260 (6.60)
0.060 (1.52) MIN.
0.012 (0.305)
0.006 (0.152)
0.320 (8.13) REF.
0.103 (2.62)
0.079 (2.06)
0.060 (1.52)
0.030 (0.76)
0.008 (0.2)
0 (0)
0.320 (8.13)
0.305 (7.75)
Revision: 22-Jul-16
Document Number: 88407
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
Document Number: 91000
1
相关型号:
TPSMC68A
Trans Voltage Suppressor Diode, 1500W, 58.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, SMC, 2 PIN
LITTELFUSE
TPSMC7.5-HE3/7T
Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
TPSMC7.5-HE3/9T
Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
TPSMC7.5/7
Trans Voltage Suppressor Diode, 1500W, 6.05V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明