TPSMC9.1HE3_A/I [VISHAY]

Trans Voltage Suppressor Diode, 1500W, 7.37V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN;


型号：	TPSMC9.1HE3_A/I
厂家：	VISHAY
描述：	Trans Voltage Suppressor Diode, 1500W, 7.37V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN
文件：	总5页 (文件大小：88K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TPSMC6.8 thru TPSMC47A

www.vishay.com

Vishay General Semiconductor

Surface Mount PAR^®Transient Voltage Suppressors

High Temperature Stability and High Reliability Conditions

FEATURES

• Junction

passivation

optimized

design

passivated anisotropic rectifier technology

• T_J= 185 °C capability suitable for high reliability

and automotive requirement

• Available in uni-directional polarity only

• 1500 W peak pulse power capability with a

10/1000 μs waveform

DO-214AB (SMC)

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak

of 260 °C

PRIMARY CHARACTERISTICS

• AEC-Q101 qualified

V_BR

6.8 V to 47 V

V_WM

5.50 V to 40.2 V

1500 W

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

P_PPM

I_FSM

200 A

T_Jmax.

Polarity

Package

185 °C

MECHANICAL DATA

Case: DO-214AB (SMC)

Molding compound meets UL 94 V-0 flammability rating

Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified

(“X” denotes revision code e.g. A, B, ..., revision code only

applicable for part number with 5 % tolerance)

Uni-directional

DO-214AB (SMC)

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for consumer,

computer, industrial, automotive, and telecommunication.

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

HE3 suffix meets JESD 201 class 2 whisker test

Polarity: color band denotes cathode end

MAXIMUM RATINGS (T_A= 25 °C, unless otherwise noted)

PARAMETER

SYMBOL

P_PPM

I_PPM

VALUE

1500

UNIT

Peak pulse power dissipation with a 10/1000 μs waveform (fig. 3) ⁽¹⁾⁽²⁾

Peak power pulse current with a 10/1000 μs waveform (fig. 1) ⁽¹⁾

Peak forward surge current 8.3 ms single half sine-wave ⁽²⁾⁽³⁾

Maximum instantaneous forward voltage at 100 A ⁽²⁾⁽³⁾

Operating junction and storage temperature range

See table next page

200

I_FSM

V_F

3.5

T_J, T_STG

-65 to +185

°C

Notes

(1)

Non-repetitive current pulse, per fig. 3 and derated above T_A= 25 °C per fig. 2

Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads at each terminal

Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum

(2)

(3)

Revision: 22-Jul-16

Document Number: 88407

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TPSMC6.8 thru TPSMC47A

www.vishay.com

Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (T_A= 25 °C, unless otherwise noted)

MAXIMUM

REVERSE

LEAKAGE

AT V_WM

T_J= 150 °C

I_D

MAXIMUM

PEAK

MAXIMUM

CLAMPING

VOLTAGE

AT I_PPM

V_C

TEST

CURRENT

I_T

STAND-OFF

VOLTAGE

V_WM

REVERSE

LEAKAGE

AT V_WM

I_R

BREAKDOWN

VOLTAGE

V_BR⁽¹⁾AT I_T

(V)

DEVICE

MARKING

CODE

PULSE

DEVICE

TYPE

SURGE

CURRENT

(mA)

(V)

(2)

I_PPM

(A)

(μA)

(V)

(μA)

MIN.

6.12

6.45

6.75

7.13

7.38

7.79

8.19

8.65

MAX.

7.48

7.14

8.25

7.88

9.02

8.61

TPSMC6.8

TPSMC6.8A

TPSMC7.5

TPSMC7.5A

TPSMC8.2

TPSMC8.2A

TPSMC9.1

TPSMC9.1A

TPSMC10

TPSMC10A

TPSMC11

TPSMC11A

TPSMC12

TPSMC12A

TPSMC13

TPSMC13A

TPSMC15

TPSMC15A

TPSMC16

TPSMC16A

TPSMC18

TPSMC18A

TPSMC20

TPSMC20A

TPSMC22

TPSMC22A

TPSMC24

TPSMC24A

TPSMC27

TPSMC27A

TPSMC30

TPSMC30A

TPSMC33

TPSMC33A

TPSMC36

TPSMC36A

TPSMC39

TPSMC39A

TPSMC43

TPSMC43A

TPSMC47

TPSMC47A

DDP

DEP

DFP

DGP

DHP

DKP

DLP

DMP

DNP

DPP

DQP

DRP

DSP

DTP

DUP

DVP

DWP

DXP

DYP

DZP

EDP

EEP

EFP

EGP

EHP

EKP

ELP

EMP

ENP

EPP

EQP

ERP

ESP

ETP

EUP

EVP

EWP

EXP

EYP

EZP

FDP

FEP

5.5

1000

500

200

10000

5000

2000

500

200

139

143

128

133

120

124

109

112

100

103

92.6

96.2

86.7

89.8

78.9

82.4

68.2

70.8

63.8

66.7

56.6

59.5

51.5

54.2

10.8

10.5

11.7

11.3

12.5

12.1

13.8

13.4

5.8

6.05

6.4

6.63

7.02

7.37

7.78

8.1

9.55

9.5

10.5

12.1

11.6

13.2

12.6

14.3

13.7

16.5

15.8

17.6

16.8

19.8

18.9

8.55

8.92

9.4

14.5

16.2

15.6

17.3

16.7

9.9

10.5

10.8

11.4

11.7

12.4

13.5

14.3

14.4

15.2

16.2

17.1

9.72

10.2

10.5

11.1

12.1

12.8

12.9

13.6

14.5

15.3

16.2

17.1

17.8

18.8

19.4

20.5

21.8

23.1

24.3

25.6

26.8

28.2

29.1

30.8

31.6

33.3

34.8

36.8

38.1

40.2

18.2

21.2

23.5

22.5

26.5

25.2

29.1

27.7

31.9

30.6

34.7

33.2

39.1

37.5

43.5

41.4

47.7

45.7

19.8

20.9

21.6

22.8

24.3

25.7

24.2

23.1

26.4

25.2

29.7

28.4

43.2

45.2

38.4

34.5

36.2

31.4

32.8

28.8

30.1

26.6

27.8

24.2

25.3

22.1

23.1

28.5

29.7

31.4

32.4

34.2

35.1

37.1

38.7

40.9

42.3

44.7

31.5

36.3

34.7

39.6

37.8

42.9

49.9

56.4

53.9

61.9

59.3

67.8

64.8

47.3

45.2

51.7

49.4

Notes

(1)

(2)

(3)

V_BRmeasured after I_Tapplied for 300 μs, I_T= square wave pulse or equivalent

Surge current waveform per fig. 3 and derated per fig. 2

All terms and symbols are consistent with ANSI/IEEE C62.35

Revision: 22-Jul-16

Document Number: 88407

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TPSMC6.8 thru TPSMC47A

www.vishay.com

Vishay General Semiconductor

ORDERING INFORMATION (Example)

PREFERRED P/N

UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY

DELIVERY MODE

TPSMC6.8AHE3_A/H ⁽¹⁾

TPSMC6.8AHE3_A/I ⁽¹⁾

TPSMC6.8AHE3_B/H ⁽¹⁾

TPSMC6.8AHE3_B/I ⁽¹⁾

0.211

850

3500

850

7" diameter plastic tape and reel

13" diameter plastic tape and reel

7" diameter plastic tape and reel

13" diameter plastic tape and reel

3500

Note

(1)

AEC-Q101 qualified

RATINGS AND CHARACTERISTICS CURVES

(T_A= 25 °C unless otherwise noted)

100

150

T_J= 25 °C

Pulse Width (t_d)

is defined as the Point

where the Peak Current

decays to 50 % of I_PPM

T_A= 25 °C

Non-Repetitive Pulse

Waveform shown in Fig. 3

t_r= 10 µs

Peak Value

I_PPM

100

Half Value -

I_PP

I_PPM

1.0

10/1000 µs Waveform

as defined by R.E.A.

0.31 x 0.31" (8.0 x 8.0 mm)

Copper Pad Areas

t_d

0.1

0.1 µs

1.0 µs

10 µs

100 µs

1.0 ms

10 ms

1.0

3.0

4.0

2.0

t - Time (ms)

t_d- Pulse Width (s)

Fig. 1 - Peak Pulse Power Rating Curve

Fig. 3 - Pulse Waveform

100

10 000

1000

100

V_R, measured at

Zero Bias

V_Rmeasured at

Stand-Off Voltage, V_WM

T_J= 25 °C

f = 1.0 MHz

V_sig= 50 mVp-p

100

T_J- Initial Temperature (°C)

100

150

200

V_BR- Breakdown Voltage (V)

Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature

Fig. 4 - Typical Junction Capacitance

Revision: 22-Jul-16

Document Number: 88407

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TPSMC6.8 thru TPSMC47A

www.vishay.com

Vishay General Semiconductor

200

T_J= T_Jmax.

8.3 ms Single Half Sine-Wave

100

Number of Cycles at 60 Hz

Fig. 5 - Maximum Non-Repetitive Peak Forward Surge Current



PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

DO-214AB (SMC)

Cathode Band

Mounting Pad Layout

0.185 (4.69) MAX.

0.246 (6.22)

0.220 (5.59)

0.126 (3.20)

0.114 (2.90)

0.126 (3.20) MIN.

0.280 (7.11)

0.260 (6.60)

0.060 (1.52) MIN.

0.012 (0.305)

0.006 (0.152)

0.320 (8.13) REF.

0.103 (2.62)

0.079 (2.06)

0.060 (1.52)

0.030 (0.76)

0.008 (0.2)

0 (0)

0.320 (8.13)

0.305 (7.75)

Revision: 22-Jul-16

Document Number: 88407

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 13-Jun-16

Document Number: 91000

TPSMC9.1HE3_A/I [VISHAY]

相关型号：

TPSMC9.1HE3_B/I

TPSMC91

TPSMC91A

TPSMC91CA

TPSMCJ

TPSMCJ

TPSMCJ10A

TPSMCJ10CA

TPSMCJ11A

TPSMCJ11CA

TPSMCJ12A

TPSMCJ12A