TSOP2156SS1PS12Z [VISHAY]

Photo IC;


型号：	TSOP2156SS1PS12Z
厂家：	VISHAY
描述：	Photo IC
文件：	总7页 (文件大小：130K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

New Product

TSOP21.., TSOP23.., TSOP41.., TSOP43.., TSOP25.., TSOP45..

www.vishay.com

Vishay Semiconductors

IR Receiver Modules for Remote Control Systems

FEATURES

• Low supply current

• Photo detector and preamplifier in one package

• Internal filter for PCM frequency

• Improved shielding against EMI

• Supply voltage: 2.5 V to 5.5 V

• Improved immunity against ambient light

• Insensitive to supply voltage ripple and noise

• Material categorization: For definitions of

16672

compliance please see www.vishay.com/doc?99912

DESCRIPTION

MECHANICAL DATA

These products are miniaturized receivers for infrared

remote control systems. A PIN diode and a preamplifier are

assembled on a lead frame, the epoxy package acts as an

IR filter.

The demodulated output signal can directly be decoded by

a microprocessor. The main benefit of the TSOP41..,

TSOP21.. is the compatibility to all IR remote control data

formats. The TSOP43.., TSOP23.. are optimized to better

suppress spurious pulses from fluorescent lamps and LCD

TVs. The TSOP45.., TSOP25.. have an excellent noise

suppression, it is immune against any dimmed LCD

backlighting or plasma TVs. AGC3 and AGC5 may also

suppress some data signals in case of continuous

transmission.

Pinning for TSOP41.., TSOP43.., TSOP45..:

1 = OUT, 2 = GND, 3 = V_S

Pinning for TSOP21.., TSOP23.., TSOP25..:

1 = OUT, 2 = V_S, 3 = GND

Please see the document “Product Transition Schedule” at

www.vishay.com/ir-receiver-modules/ for up-to-date info,

when this product will be released.

This component has not been qualified according to

automotive specifications.

PARTS TABLE

SHORT BURST AND

HIGH DATA RATE

NOISY ENVIROMENTS

AND SHORT BURSTS

(AGC3)

VERY NOISY ENVIRONMENTS

AND SHORT BURSTS

(AGC5)

(AGC1)

CARRIER

FREQUENCY

PINNING

1 = OUT, 2 = GND, 1 = OUT, 2 = V_S, 1 = OUT, 2 = GND, 1 = OUT, 2 = V_S, 1 = OUT, 2 = GND, 1 = OUT, 2 = V_S,

3 = V_S

3 = GND

TSOP2130

TSOP2133

TSOP2136

TSOP2138

TSOP2140

TSOP2156

3 = V_S

3 = GND

TSOP2330

TSOP2333

TSOP2336

TSOP2338

TSOP2340

TSOP2356

3 = V_S

3 = GND

TSOP2530

TSOP2533

TSOP2536

TSOP2538

TSOP2540

TSOP2556

30 kHz

33 kHz

36 kHz

38 kHz

40 kHz

56 kHz

TSOP4130

TSOP4133

TSOP4136

TSOP4138

TSOP4140

TSOP4156

TSOP4330

TSOP4333

TSOP4336

TSOP4338

TSOP4340

TSOP4356

TSOP4530

TSOP4533

TSOP4536

TSOP4538

TSOP4540

TSOP4556

BLOCK DIAGRAM

16833_14

APPLICATION CIRCUIT

17170-10

R₁

C₁

Transmitter

with

TSALxxxx

IR receiver

V_S

+ V_S

33 kΩ

µC

OUT

GND

Band

pass

Demo-

dulator

V_O

Input

AGC

GND

The external components R and C are optional

Control circuit

to improve the robustness against electrical overstress

(typical values are R = 100 Ω, C = 0.1 µF).

Rev. 1.1, 04-Sep-12

Document Number: 82460

For technical questions, contact: IRR@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

New Product

TSOP21.., TSOP23.., TSOP41.., TSOP43.., TSOP25.., TSOP45..

www.vishay.com

Vishay Semiconductors

ABSOLUTE MAXIMUM RATINGS

PARAMETER

TEST CONDITION

SYMBOL

V_S

VALUE

UNIT

Supply voltage

- 0.3 to + 6

Supply current

I_S

- 0.3 to 5.5

- 0.3 to (V_S+ 0.3)

Output voltage

V_O

Voltage at output to supply

Output current

V_S- V_O

I_O

°C

Junction temperature

Storage temperature range

Operating temperature range

Power consumption

Soldering temperature

T_j

100

T_stg

T_amb

P_tot

T_sd

- 25 to + 85

T_amb≤ 85 °C

t ≤ 10 s, 1 mm from case

260

Note

•

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only

and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification

is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability.

ELECRTICAL AND OPTICAL CHARACTERISTICS (T_amb= 25 °C, unless otherwise specified)

PARAMETER

Supply current

Supply voltage

TEST CONDITION

SYMBOL

MIN.

TYP.

MAX.

UNIT

E_v= 0, V_S= 5 V

I_SD

I_SH

V_S

0.55

0.7

0.9

E_v= 40 klx, sunlight

0.8

2.5

5.5

E_v= 0, test signal see fig. 1,

IR diode TSAL6200,

I_F= 200 mA

I_OSL= 0.5 mA, E_e= 0.7 mW/m²,

test signal see fig. 1

Transmission distance

Output voltage low

Minimum irradiance

V_OSL

100

Pulse width tolerance:

_pi- 5/f_o< t_po< t_pi+ 6/f_o,

test signal see fig. 1

E_{e min.}

0.12

0.25

mW/m²

t_pi- 5/f_o< t_po< t_pi+ 6/f_o,

test signal see fig. 1

Maximum irradiance

Directivity

E_{e max.}

W/m²

deg

Angle of half transmission

distance

ϕ_1/2

TYPICAL CHARACTERISTICS (T_amb= 25 °C, unless otherwise specified)

Optical Test Signal

0.30

0.25

0.20

0.15

0.10

0.05

0.00

E_e

(IR diode TSAL6200, I_F= 0.4 A, N = 6 pulses, f = f₀, t = 10 ms)

Output pulse width

_pi*)

Input burst length

*) t_pi≥ 6/f is recommended for optimal function

Output Signal

¹⁾3/f₀< t_d< 9/f₀

14337

V_O

λ = 950 nm,

optical test signal, Fig. 1

- 4/f₀< t_po< t_pi+ 6/f₀

V_OH

V_OL

0.1

1000

100 000

E_e- Irradiance (mW/m²)

t_d

t_po

Fig. 1 - Output Active Low

Fig. 2 - Pulse Length and Sensitivity in Dark Ambient

Rev. 1.1, 04-Sep-12

Document Number: 82460

For technical questions, contact: IRR@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

New Product

TSOP21.., TSOP23.., TSOP41.., TSOP43.., TSOP25.., TSOP45..

www.vishay.com

Vishay Semiconductors

Optical Test Signal

E_e

Correlation with

ambient light sources:

10 W/m²= 1.4 klx

(Std. ilum. A, T = 2855 K)

600 µs

Wavelength of ambient

illumination: λ = 950 nm

t = 60 ms

94 8134

Output Signal, (see fig. 4)

V_O

V_OH

V_OL

0.01

0.1

100

t_on

t_off

E_e- Ambient DC Irradiance (W/m²)

Fig. 3 - Output Function

Fig. 6 - Sensitivity in Bright Ambient

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

t_on

f = f₀

f = 10 kHz

f = 100 kHz

t_off

λ = 950 nm,

optical test signal, Fig. 3

0.1

100

1000 10 000

100

1000

E_e- Irradiance (mW/m²)

ΔV_{S RMS}- AC Voltage on DC Supply Voltage (mV)

Fig. 4 - Output Pulse Diagram

Fig. 7 - Sensitivity vs. Supply Voltage Disturbances

1.2

TSOP41.., TSOP21..

0.9

1.0

0.8

0.6

0.4

0.2

0.0

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

TSOP43.., TSOP23..

f = f₀ꢀ ꢁ

f (3 dB) = f /7

TSOP45.., TSOP25..

0.7

0.9

1.1

1.3

80 100 120 140

16926

f/f - Relative Frequency

Burst Length (Number of Cycles/Burst)

Fig. 5 - Frequency Dependence of Responsivity

Fig. 8 - Max. Envelope Duty Cycle vs. Burst Length

Rev. 1.1, 04-Sep-12

Document Number: 82460

For technical questions, contact: IRR@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

New Product

TSOP21.., TSOP23.., TSOP41.., TSOP43.., TSOP25.., TSOP45..

www.vishay.com

Vishay Semiconductors

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.4

0.3

0.2

0.1

1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5

- 30 - 10

V_S- Supply Voltage (V)

T_amb- Ambient Temperature (°C)

Fig. 9 - Sensitivity vs. Ambient Temperature

Fig. 12 - Sensitivity vs. Supply Voltage

0.9

0.8

0.7

0.6

0.ꢀ

0.4

0.3

0.2

0.1

7ꢀ0 800 8ꢀ0 900 9ꢀ0 1000 10ꢀ0 1100 11ꢀ0

2142ꢀ

λ- Wavelength (nm)

Fig. 10 - Relative Spectral Sensitivity vs. Wavelength

0°

10°

20°

30°

40°

1.0

0.9

0.8

ꢀ0°

60°

70°

80°

0.7

0.6

0.4

0.2

96 12223p2 d_rel- Relative Transmission Distance

Fig. 11 - Horizontal Directivity

Rev. 1.1, 04-Sep-12

Document Number: 82460

For technical questions, contact: IRR@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

New Product

TSOP21.., TSOP23.., TSOP41.., TSOP43.., TSOP25.., TSOP45..

www.vishay.com

Vishay Semiconductors

SUITABLE DATA FORMAT

These products are designed to suppress spurious output

pulses due to noise or disturbance signals. Data and

disturbance signals can be distinguished by the devices

according to carrier frequency, burst length and envelope

duty cycle. The data signal should be close to the

band-pass center frequency (e.g. 38 kHz) and fulfill the

conditions in the table below.

When a data signal is applied to the IR receiver in the

presence of a disturbance signal, the sensitivity of the

receiver is reduced to insure that no spurious pulses are

present at the output. Some examples of disturbance

signals which are suppressed are:

ꢀ

1ꢀ

• DC light (e.g. from tungsten bulb or sunlight)

• Continuous signals at any frequency

16920

Time (ms)

Fig. 13 - IR Signal from Fluorescent Lamp

with Low Modulation

• Modulated noise from fluorescent lamps with electronic

ballasts (see figure 14 or figure 15)

ꢀ

1ꢀ

16921

Time (ms)

Fig. 14 - IR Signal from Fluorescent Lamp

with High Modulation

TSOP41.., TSOP21..

TSOP43.., TSOP23..

TSOP45.., TSOP25..

Minimum burst length

6 cycles/burst

After each burst of length

a minimum gap time is required of

6 to 70 cycles

≥ 10 cycles

6 to 35 cycles

≥ 10 cycles

6 to 24 cycles

≥ 10 cycles

For bursts greater than

a minimum gap time in the data stream is needed of

70 cycles

> 1.1 x burst length

35 cycles

> 6 x burst length

24 cycles

> 25 ms

Maximum number of continuous short bursts/second

Recommended for NEC code

2000

yes

2000

yes

2000

yes

Recommended for RC5/RC6 code

Recommended for Sony code

Recommended for RECS-80 code

Recommended for RCMM code

Recommended for r-step code

yes

Recommended for XMP code

Internference signals

from lamps with high

modulation are suppressed

(examples: signal pattern

of fig. 14 and fig. 15)

Common disturbance

signals are supressed

(example: signal pattern

of fig. 14)

Even critical disturbance

signals like dimmed

LCD backlighting

Suppression of interference from fluorescent lamps

are suppressed

Note

For data formats with long bursts (more than 10 carrier cycles) please see the datasheet for TSOP22.., TSOP48.., TSOP24.., TSOP44..

•

Rev. 1.1, 04-Sep-12

Document Number: 82460

For technical questions, contact: IRR@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

New Product

TSOP21.., TSOP23.., TSOP41.., TSOP43.., TSOP25.., TSOP45..

www.vishay.com

Vishay Semiconductors

PACKAGE DIMENSIONS in millimeters

3.9

0.85 max.

0.89

0.5 max.

1.3

2.54 nom.

0.7 max.

4.1

2.54 nom.

5.6

marking area

Not indicated tolerances 0.2

technical drawings

according to DIN

speciﬁcations

R 2.5

Drawing-No.: 6.550-5169.01-4

Issue: 9; 03.11.10

13655

Rev. 1.1, 04-Sep-12

Document Number: 82460

For technical questions, contact: IRR@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000

TSOP2156SS1PS12Z [VISHAY]

相关型号：

TSOP2156SS1PS21

TSOP2156TE1

TSOP2156UH1

TSOP2156UH1F

TSOP2156VI1

TSOP2156YA1

TSOP22

TSOP22..WE1

TSOP2230

TSOP2230AY1