TSOP58330BS21Z [VISHAY]
Photo IC;
| 型号： | TSOP58330BS21Z |
| 厂家： | 
VISHAY |
| 描述： | Photo IC |
| 文件： | 总7页 (文件大小：118K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TSOP581.., TSOP583..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
FEATURES
• Low supply current
• Photo detector and preamplifier in one
package
• Internal filter for PCM frequency
• Improved shielding against EMI
• Supply voltage: 2.7 V to 5.5 V
19026
• Suitable for short bursts: burst length ≥ 6
carrier cycles
MECHANICAL DATA
Pinning
• Improved immunity against ambient light
• Insensitive to supply voltage ripple and noise
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
1 = OUT, 2 = GND, 3 = VS
DESCRIPTION
The TSOP581.., TSOP583.. series are miniaturized
receiversfor infrared remote control systems. A PIN diode
and a preamplifier are assembled on a lead frame, the epoxy
package acts as an IR filter.
The demodulated output signal can directly be decoded by
a microprocessor. The main benefit of the TSOP581.. is the
compatibility to all IR remote control data formats. The
TSOP583.. is optimized to better suppress spurious pulses
from fluorescent lamps, LCD TVs or plasma displays.
This component has not been qualified according to
automotive specifications.
PARTS TABLE
CARRIER FREQUENCY
SHORT BURSTS AND HIGH DATA RATES (AGC1) NOISY ENVIROMENTS AND SHORT BURSTS (AGC3)
30 kHz
33 kHz
36 kHz
38 kHz
40 kHz
56 kHz
TSOP58130
TSOP58133
TSOP58136
TSOP58138
TSOP58140
TSOP58156
TSOP58330
TSOP58333
TSOP58336
TSOP58338
TSOP58340
TSOP58356
BLOCK DIAGRAM
APPLICATION CIRCUIT
17170_7
16833_5
R1
3
Transmitter
with
TSALxxxx
IR receiver
VS
+ VS
GND
VS
33 kΩ
C1
µC
1
OUT
GND
OUT
VO
Band
pass
Demo-
dulator
Input
AGC
2
The external components R and C are optional
1
1
PIN
to improve the robustness against electrical overstress
(typical values are R = 100 Ω, C = 0.1 µF).
Control circuit
GND
1
1
The output voltage VO should not be pulled down to a level
below 1 V by the external circuit.
The capacitive load at the output should be less than 2 nF.
Document Number: 81398
Rev. 1.5, 20-Aug-10
www.vishay.com
1
TSOP581.., TSOP583..
IR Receiver Modules for Remote
Control Systems
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VS
VALUE
UNIT
V
Supply voltage (pin 3)
Supply current (pin 3)
Output voltage (pin 1)
Voltage at output to supply
Output current (pin 1)
Junction temperature
Storage temperature range
Operating temperature range
Power consumption
- 0.3 to + 6
IS
5
- 0.3 to 5.5
- 0.3 to (VS + 0.3)
5
mA
V
VO
VS - VO
IO
V
mA
°C
°C
°C
mW
°C
Tj
100
Tstg
Tamb
Ptot
Tsd
- 25 to + 85
- 25 to + 85
10
Tamb ≤ 85 °C
t ≤ 10 s, 1 mm from case
Soldering temperature
260
Note
•
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability.
ELECTRICAL AND OPTICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
0.85
0.95
MAX.
UNIT
mA
mA
V
Ev = 0, VS = 5 V
ISD
ISH
VS
0.65
1.05
Supply current (pin 3)
Supply voltage
Ev = 40 klx, sunlight
2.7
5.5
Ev = 0, test signal see fig. 1,
IR diode TSAL6200,
IF = 400 mA
IOSL = 0.5 mA, Ee = 0.7 mW/m2,
test signal see fig. 1
Transmission distance
Output voltage low (pin 1)
Minimum irradiance
d
40
m
mV
VOSL
100
Pulse width tolerance:
tpi - 5/fo < tpo < tpi + 6/fo,
test signal see fig. 1
Ee min.
0.3
45
0.45
mW/m2
tpi - 5/fo < tpo < tpi + 6/fo,
test signal see fig. 1
Maximum irradiance
Directivity
Ee max.
30
W/m2
deg
Angle of half transmission
distance
ϕ1/2
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Optical Test Signal
Ee
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
(IR diode TSAL6200, IF = 0.4 A, N = 6 pulses, f = fO, t = 10 ms)
Output Pulse Width
Input Burst Length
t
tpi *)
T
*) tpi ≥ 6/f is recommended for optimal function
o
Output Signal
14337
VO
1) 3/fO < td < 9/fO
λ = 950 nm,
Optical Test Signal, Fig.1
2)
t
- 4/fO < tpo < tpi + 6/fO
pi
VOH
VOL
0.1
1
10
Ee - Irradiance (mW/m²)
102
103
104
105
1)
2)
t
td
tpo
21391_1
Fig. 1 - Output Active Low
Fig. 2 - Pulse Length and Sensitivity in Dark Ambient
www.vishay.com
2
Document Number: 81398
Rev. 1.5, 20-Aug-10
TSOP581.., TSOP583..
IR Receiver Modules for Remote
Control Systems
Vishay Semiconductors
5.0
Optical Test Signal
Ee
Correlation with Ambient Light Sources:
10 W/m2 = 1.4 kLx (Std. illum. A, T = 2855 K)
10 W/m2 = 8.2 kLx (Daylight, T = 5900 K)
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
t
600 µs
600 µs
t = 60 ms
Wavelength of Ambient
Illumination: λ = 950 nm
94 8134
Output Signal, (see fig. 4)
VO
VOH
VOL
0.01
0.1
1
10
100
t
ton
toff
Ee - Ambient DC Irradiance (W/m2)
21393
Fig. 3 - Output Function
Fig. 6 - Sensitivity in Bright Ambient
0.8
0.7
0.6
0.5
0.4
0.3
0.2
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
f = f0
Ton
f = 30 kHz
f = 20 kHz
Toff
λ = 950 nm,
f = 10 kHz
f = 100 Hz
Optical Test Signal, Fig. 3
0.1
1
10
102
103
104
105
1
10
100
1000
21392_1
21394
Ee - Irradiance (mW/m²)
ΔVsRMS - AC Voltage on DC Supply Voltage (mV)
Fig. 4 - Output Pulse Diagram
Fig. 7 - Sensitivity vs. Supply Voltage Disturbances
500
450
400
350
300
250
200
150
100
50
1.2
1.0
0.8
0.6
0.4
0.2
0.0
f = f0 5 ꢀ
f (3 dB) = f /7
0
0
0.7
0.9
1.1
1.3
0
500
1000 1500 2000 2500 3000
f - EMI Frequency (MHz)
20747
16926
f/f - Relative Frequency
0
Fig. 5 - Frequency Dependence of Responsivity
Fig. 8 - Sensitivity vs. Electric Field Disturbances
Document Number: 81398
Rev. 1.5, 20-Aug-10
www.vishay.com
3
TSOP581.., TSOP583..
IR Receiver Modules for Remote
Control Systems
Vishay Semiconductors
0°
10°
20°
1
0.9
0.8
0.7
30°
40°
1.0
0.6
0.5
0.4
0.3
0.2
0.1
0
TSOP581..
50°
60°
0.9
0.8
TSOP583..
70°
80°
0.7
Ee = 2 mW/m²
0.6
0.4
0.2
0
0
20
40
60
80
100 120 140
19258
drel - Relative Transmission Distance
21590-3
Burst Length (number of cycles/burst)
Fig. 9 - Max. Envelope Duty Cycle vs. Burst Length
Fig. 12 - Horizontal Directivity
0°
10°
20°
0.45
0.4
30°
40°
0.35
0.3
1.0
0.9
0.8
50°
60°
0.25
0.2
70°
80°
0.7
0.15
0.6
0.4
0.2
0
- 30
- 10
10
30
50
70
90
d
- Relative Transmission Distance
19259
rel
Tamb - Ambient Temperature (°C)
21397
Fig. 10 - Sensitivity vs. Ambient Temperature
Fig. 13 - Vertical Directivity
0.50
0.45
0.40
0.35
0.30
0.25
0.20
1.2
1.0
0.8
0.6
0.4
0.2
0
750
850
950
1050
1150
1.5
2
2.5
3
3.5
4
4.5
5
5.5
94 8408
21398
λ - Wavelength (nm)
VS - Supply Voltage (V)
Fig. 11 - Relative Spectral Sensitivity vs. Wavelength
Fig. 14 - Sensitivity vs. Supply Voltage
www.vishay.com
4
Document Number: 81398
Rev. 1.5, 20-Aug-10
TSOP581.., TSOP583..
IR Receiver Modules for Remote
Control Systems
Vishay Semiconductors
SUITABLE DATA FORMAT
The TSOP581.., TSOP583.. are designed to suppress
spurious output pulses due to noise or disturbance signals.
Data and disturbance signals can be distinguished by the
devices according to carrier frequency, burst length and
envelope duty cycle. The data signal should be close to the
band-pass center frequency (e.g. 38 kHz) and fulfill the
conditions in the table below.
When a data signal is applied to the TSOP581.., TSOP583..
in the presence of a disturbance signal, the sensitivity of the
receiver is reduced to insure that no spurious pulses are
present at the output. Some examples of disturbance
signals which are suppressed are:
IR Signal from Fluorescent
Lamp with Low Modulation
5
0
10
15
20
• DC light (e.g. from tungsten bulb or sunlight)
• Continuous signals at any frequency
16920
Time (ms)
Fig. 15 - IR Signal from Fluorescent Lamp
with Low Modulation
• Modulated IR signals from common fluorescent lamps
(example of noise pattern is shown in fig. 15 or fig. 16)
IR Signal from Fluorescent
Lamp with High Modulation
0
5
10
15
20
16921
Time (ms)
Fig. 16 - IR Signal from Fluorescent Lamp
with High Modulation
TSOP581..
TSOP583..
Minimum burst length
6 cycles/burst
6 cycles/burst
After each burst of length
a minimum gap time is required of
6 to 70 cycles
≥ 10 cycles
6 to 35 cycles
≥ 10 cycles
For bursts greater than
a minimum gap time in the data stream is needed of
70 cycles
> 1.1 x burst length
35 cycles
> 6 x burst length
Maximum number of continuous short bursts/second
Recommended for NEC code
2000
yes
yes
yes
yes
yes
yes
yes
2000
yes
yes
yes
yes
yes
yes
yes
Recommended for RC5/RC6 code
Recommended for Sony code
Recommended for RECS-80 code
Recommended for RCMM code
Recommended for r-step code
Recommended for XMP code
Common disturbance signals are
supressed (e.g. waveform of figure 15) suppressed (e.g. waveform of figure 16)
Even critical disturbance signals are
Suppression of interference from fluorescent lamps
Note
For data formats with long bursts (more than 10 carrier cycles) please see the datasheet for TSOP582.., TSOP584.. .
•
Document Number: 81398
Rev. 1.5, 20-Aug-10
www.vishay.com
5
TSOP581.., TSOP583..
IR Receiver Modules for Remote
Control Systems
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
5
4.8
(4)
2.8
R 2
(1.54)
0.85 max.
0.5 max.
2.54 nom.
0.7 max.
2.54 nom.
1.2 0.2
Marking area
technical drawings
according to DIN
specifications
Not indicated to lerances 0.2
Drawing-No.: 6.550-5263.01-4
Issue: 12; 16.04.10
19009
R 2
www.vishay.com
6
Document Number: 81398
Rev. 1.5, 20-Aug-10
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明