TSPS1003K4642AUF [VISHAY]

Array/Network Resistor, Isolated, Thin Film, 0.1W, 46400ohm, 100V, 0.1% +/-Tol, -100,100ppm/Cel, 9810,;


型号：	TSPS1003K4642AUF
厂家：	VISHAY
描述：	Array/Network Resistor, Isolated, Thin Film, 0.1W, 46400ohm, 100V, 0.1% +/-Tol, -100,100ppm/Cel, 9810,
文件：	总4页 (文件大小：100K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TSP

www.vishay.com

Vishay Dale Thin Film

Molded, Commercial, Single In-Line Thin Film Resistor,

Through Hole Network (Standard)

FEATURES

• Lead (Pb)-free gold plated terminals standard

• Gold to gold terminations (no internal solder)

• Exceptional ratio stability over time and

Available

temperature (R 0.015 % 2000 h at 70 °C)

Actual Size

• Rugged low profile molded case 6 pins, 8 pins,

and 10 pins available

Designed to meet MIL-PRF-83401 characteristic “V” and “H”

• Compatible with automatic insertion equipment

These resistor networks are available in 6 pins, 8 pins and

10 pins styles in both standard and custom circuits. They

incorporate Vishay Dale Thin Film’s patented passivated

nichrome film to give superior performance on temperature

coefficient of resistance, thermal stability, noise, voltage

coefficient, power handling and resistance stability. The

leads are attached to the metallized alumina substrates by

Thermo-Compression bonding. The body is molded

thermoset plastic with gold plated copper alloy leads. This

product will outperform all of the requirements of

characteristic “V” and “H” of MIL-PRF-83401.

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

Note

This datasheet provides information about parts that are

RoHS-compliant and/or parts that are non-RoHS-compliant. For

example, parts with lead (Pb) terminations are not RoHS-compliant.

Please see the information/tables in this datasheet for details.



TYPICAL PERFORMANCE

ABSOLUTE

TRACKING

TCR

TOL.

ABSOLUTE

0.1

RATIO

0.05

SCHEMATIC

Schematic 01

Schematic 03

Schematic 06

2 3

N-1

STANDARD ELECTRICAL SPECIFICATIONS

TEST

SPECIFICATIONS

CONDITIONS

Material

Passivated nichrome

6, 8, 10

Pin/Lead Number

Resistance Range

TCR: Absolute

100  to 200 k per resistor

25 ppm/°C (standard)

- 55 °C to + 125 °C

TCR: Tracking

2 ppm/°C (typical less 1 ppm/°C equal values) ⁽¹⁾

0.1 % to 1.0 %

0.05 % to 0.1 % to R₁

0.100 W (per element typical at + 25 °C)

0.500 W

- 55 °C to + 125 °C

Tolerance: Absolute

Tolerance: Ratio

Power Rating: Resistor

Power Rating: Package

Stability: Absolute

Stability: Ratio

+ 25 °C

Maximum at + 70 °C

R 0.05 %

R 0.015 %

2000 h at + 70 °C

Voltage Coefficient

Working Voltage

Operating Temperature Range

Storage Temperature Range

Noise

< 0.1 ppm/V

100 V

- 55 °C to + 125 °C

< - 30 dB

Thermal EMF

< 0.08 μV/°C

Shelf Life Stability: Absolute

Shelf Life Stability: Ratio

R 0.01 %

R 0.002 %

1 year at + 25 °C

Note

(1)

Consult factory for TCR tracking specifications 01 schematic

Revision: 21-Oct-13

Document Number: 60037

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TSP

www.vishay.com

Vishay Dale Thin Film

DIMENSIONS AND IMPRINTING in inches and millimeters

DIMENSION

INCHES

0.035

0.040

MILLIMETERS

0.89

Part

Number

1.02

Indicates

Pin 1

0.100 0.005 non-accum.

0.019 0.006 typical

0.187 0.010

0.135

2.54 0.13

0.48 0.15

4.75 0.25

3.43

Date

Code

Vishay

Logo

0.095

2.41

0.012 0.004

0.583 0.015

0.783 0.015

0.983 0.015

0.31 0.10

14.81 0.38

19.89 0.38

24.97 0.38

L (6 Pins)

L (8 Pins)

L (10 Pins)

CONSTRUCTION

High Purity

Alumina Substrate

Gold Plated

Copper Leads

Sputtered TAMELOX

Film System

Gold to Gold

Thermo-Compression Bond

(No Internal Solder)

MECHANICAL SPECIFICATIONS

Resistive Element

Substrate Material

Body Molded

Passivated nichrome or tantalum nitride

Alumina

Epoxy

Terminals

Plating

Model TSP - Lead (Pb)-free Standard

Model TSPS - Lead (Pb)-free Solder Coated Option

Model TSPL - Tin/Lead Solder Coated Option

Tin/Lead and Lead (Pb)-free Finish

Copper alloy

Nickel/gold

Gold plated

Sn96.5, Ag3.0, Cu0.5

Sn63

Hot solder dip

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: TSP6011002BUF

GLOBAL MODEL PIN COUNT

TCR

TOLERANCE AND

RATIO TOLERANCE

SCHEMATICS

RESISTANCE

PACKAGING

(3 or 4 digits)

(1 or 2 digits)

CHARACTERISTICS

TSP

(Lead (Pb)-free)

(e4)

01 ⁽¹⁾= 5, 7 or 9 R = 25 ppm/°C ⁽²⁾



First 3 digits are

significant figures

and the last digit

specifies the

Absolute

Ratio

UF = Tubed

A = 0.1 % ⁽³⁾

B = 0.1 %

C = 0.25 %

D = 0.5 %

F = 1.0 %



resistors with

Pin 1 common

03 = 3, 4 or 5

H = 50 ppm/°C

K = 100 ppm/°C

0.05 %

0.1 %

0.5 %

TSPL

Note

(Tin/lead)

TSPS

(Lead (Pb)-free)

(e1)

isolated resistors

06 = 5, 7 or 9

series connected

number of zeroes

to follow.

(2)

01 Schematic 

greater than

250  only

e.g.: 1001 = 1K

1002 = 10K

Note

⁽¹⁾Consult factory for TCR tracking specifications 01 schematic

(3)

Tol. available on 1K and up only. R₁is reference resistor.

Historical Part Number example: TSP803R1001F (for reference purposes only)

TSP

1001

TCR

TOLERANCE AND

RATIO TOLERANCE

SERIES

PINS

SCHEMATIC

RESISTANCE

CHARACTERISTIC

Revision: 21-Oct-13

Document Number: 60037

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TSP

www.vishay.com

Vishay Dale Thin Film

DERATING CURVE

100

125

Ambient Temperature °C

Revision: 21-Oct-13

Document Number: 60037

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000

相关型号：

TSPS1003K6730D

Array/Network Resistor, Isolated, Thin Film, 0.1W, 673ohm, 100V, 0.5% +/-Tol, -100,100ppm/Cel, 9810,