UG06C-E3/54 [VISHAY]
DIODE 0.6 A, 150 V, SILICON, SIGNAL DIODE, ROHS COMPLIANT, MINIATURE, PLASTIC, CASE MPG06, 2 PIN, Signal Diode;
| 型号： | UG06C-E3/54 |
| 厂家： | 
VISHAY |
| 描述： | DIODE 0.6 A, 150 V, SILICON, SIGNAL DIODE, ROHS COMPLIANT, MINIATURE, PLASTIC, CASE MPG06, 2 PIN, Signal Diode 二极管 |
| 文件： | 总4页 (文件大小：74K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
UG06A, UG06B, UG06C, UG06D
www.vishay.com
Vishay General Semiconductor
Miniature Ultrafast Plastic Rectifier
FEATURES
• Glass passivated pellet chip junction
• Ultrafast reverse recovery time
• Soft recovery characteristics
• Low forward voltage drop
• Low switching losses, high efficiency
• High forward surge capability
• Solder dip 275 °C max. 10 s, per JESD 22-B106
MPG06
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency rectification and freewheeling
application in switching mode converters and inverters for
consumer, computer and telecommunication.
PRIMARY CHARACTERISTICS
IF(AV)
0.6 A
VRRM
IFSM
50 V, 100 V, 150 V, 200 V
MECHANICAL DATA
Case: MPG06
40 A
15 ns
trr
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
VF
0.95 V
TJ max.
Package
Diode variations
150 °C
MPG06
Single die
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL UG06A
UG06B
100
UG06C
150
UG06D
200
UNIT
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
50
35
50
70
105
140
V
Maximum DC blocking voltage
100
150
200
Maximum average forward rectified current (fig. 1)
IF(AV)
0.6
40
A
Peak forward surge current 8.3 ms single half sine-wave superimposed
on rated load
IFSM
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
°C
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
VALUE
UNIT
Maximum instantaneous
forward voltage
(1)
IF = 0.6 A
VF
0.95
V
TA = 25 °C
5.0
100
15
Maximum DC reverse current
IR
μA
ns
at rated DC blocking voltage
TA = 100 °C
Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A
trr
trr
TJ = 25 °C
TJ = 100 °C
TJ = 25 °C
TJ = 100 C
25
Maximum reverse recovery time IF = 0.6 A, VR = 30 V, dI/dt = 50 A/μs, Irr = 10 % IRM
35
8.0
20
Maximum stored charge
IF = 0.6 A, VR = 30 V, dI/dt = 50 A/μs, Irr = 10 % IRM
4 V, 1 MHz
Qrr
CJ
nC
pF
Typical junction capacitance
9.0
Note
(1)
Pulse test: 300 μs pulse width, 1 % duty cycle
Revision: 19-Feb-16
Document Number: 88757
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
UG06A, UG06B, UG06C, UG06D
www.vishay.com
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
UG06A
UG06B
UG06C
UG06D
UNITS
(1)
RJA
97
28
Typical thermal resistance
°C/W
(1)
RJL
Note
(1)
Thermal resistance from junction to ambient and junction to lead at 0.375" (9.5 mm) lead length, PCB mounted with 0.2" x 0.2" (5.0 mm x 5.0 mm)
copper pads
ORDERING INFORMATION (Example)
PREFERRED P/N
UG06D-E3/54
UG06D-E3/73
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY
DELIVERY MODE
13" diameter paper tape and reel
Ammo pack packaging
0.181
0.181
54
73
5500
3000
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
0.90
0.75
0.60
0.45
0.30
0.15
0
100
10
Resistive or Inductive Load
0.375" (9.5 mm) Lead Length
TL Lead Temperature
TJ = 100 °C
Pulse Width = 300 μs
1 % Duty Cycle
1
TJ = 25 °C
TA, Ambient Temperature
0.1
P.C.B. Mounted
0.2" x 0.2" (5.0 mm x 5.0 mm)
Copper Pads
0.01
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0
25
50
75
100
125
150
175
Instantaneous Forward Voltage (V)
Temperature (°C)
Fig. 1 - Maximum Forward Current Derating Curves
Fig. 3 - Typical Instantaneous Forward Characteristics
100
1000
100
TJ = 75 °C
8.3 ms Single Half Sine-Wave
TJ = 100 °C
10
10
TJ = 25 °C
1
0.1
1
0.01
1
10
100
0
20
40
60
80
100
Number of Cycles at 60 Hz
Percent of Rated Peak Reverse Voltage (%)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Fig. 4 - Typical Reverse Leakage Characteristics
Revision: 19-Feb-16
Document Number: 88757
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
UG06A, UG06B, UG06C, UG06D
www.vishay.com
Vishay General Semiconductor
60
50
40
30
20
10
0
trr
Qrr
IF = 0.6 A
VR = 30 V
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
dI/dt = 20 A/μs
dI/dt = 50 A/μs
dI/dt = 100 A/μs
dI/dt = 150 A/μs
dI/dt = 150 A/μs
dI/dt = 100 A/μs
10
dI/dt = 50 A/μs
dI/dt = 20 A/μs
1
0
25
50
75
100
125
150
175
0.1
1
10
100
Junction Temperature (°C)
Reverse Voltage (V)
Fig. 5 - Reverse Switching Charateristics
Fig. 6 - Typical Junction Capacitance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
MPG06
1.0 (25.4)
MIN.
0.100 (2.54)
0.090 (2.29)
DIA.
0.125 (3.18)
0.115 (2.92)
1.0 (25.4)
MIN.
0.025 (0.635)
0.023 (0.584)
DIA.
Revision: 19-Feb-16
Document Number: 88757
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号：
UG06C-E3/73
DIODE 0.6 A, 150 V, SILICON, SIGNAL DIODE, ROHS COMPLIANT, MINIATURE, PLASTIC, CASE MPG06, 2 PIN, Signal Diode
VISHAY
UG06CE3
DIODE 0.6 A, 150 V, SILICON, SIGNAL DIODE, LEAD FREE, PLASTIC, MPG06, 2 PIN, Signal Diode
VISHAY
UG06D-E3
DIODE 0.6 A, 200 V, SILICON, SIGNAL DIODE, LEAD FREE, MINIATURE, PLASTIC, CASE MPG06, 2 PIN, Signal Diode
VISHAY
UG06D/23
Rectifier Diode, 1 Element, 0.6A, 200V V(RRM), Silicon, MINIATURE, PLASTIC, CASE MPG06, 2 PIN
VISHAY
UG06DE3
DIODE 0.6 A, 200 V, SILICON, SIGNAL DIODE, LEAD FREE, PLASTIC, MPG06, 2 PIN, Signal Diode
VISHAY
©2020 ICPDF网 联系我们和版权申明