UXA02040F7962CR100 [VISHAY]
Fixed Resistor, Thin Film, 0.1W, 79600ohm, 200V, 0.25% +/-Tol, -10,10ppm/Cel,;型号: | UXA02040F7962CR100 |
厂家: | VISHAY |
描述: | Fixed Resistor, Thin Film, 0.1W, 79600ohm, 200V, 0.25% +/-Tol, -10,10ppm/Cel, |
文件: | 总8页 (文件大小:138K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UXA 0204, UXB 0207, UXE 0414
Vishay Beyschlag
High Precision Thin Film Leaded Resistors
FEATURES
• Superior thin film technology
• Exceptional low TCR: 02 ppm/K to 10 ppm/K
• Super tight tolerance: 0.01 % to 0.2ꢀ %
• Exceptional overall stability: Class 0.02
• Wide resistance range: 22 Ω to 1 MΩ
• Lead (Pb)-free solder contacts
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Compliant to RoHS directive 2002/9ꢀ/EC
DESCRIPTION
UXA 0204, UXB 0207 and UXE 0414 high precision leaded
thin film resistors combine the proven reliability of the
professional products with an exceptional level of precision
and stability. Therefore they are perfectly suited for
applications in the fields of precision test and measuring
equipment and particularly for the design of calibration
references and standards.
APPLICATIONS
• Precision test and measuring equipment
• Design of calibration references and standards
METRIC SIZE
DIN
0204
0207
B
0414
D
CECC
A
TECHNICAL SPECIFICATIONS
DESCRIPTION
UXA 0204
UXB 0207
UXE 0414
CECC Size
A
B
D
Resistance Range
Resistance Tolerance
Temperature Coefficient
Operation Mode
22 Ω to 221 kΩ
10 Ω to 1 MΩ
22 Ω to ꢀ11 kΩ
0.1 %; 0.0ꢀ %
0.2ꢀ %; 0.1 %; 0.0ꢀ %; 0.01 %
10 ppm/K; 0ꢀ ppm/K; 02 ppm/K
10 ppm/K; 0ꢀ ppm/K
Precision
Climatic Category (LCT/UCT/days)
Rated Dissipation:
P8ꢀ
20/12ꢀ/ꢀ6
0.0ꢀ W
0.1 W
200 V
0.12ꢀ W
0.2ꢀ W
0.2ꢀ W
0.ꢀ W
300 V
P70
Operating Voltage, Umax. AC/DC
Film Temperature
2ꢀ0 V
12ꢀ °C
Max. Resistance Change at P70
for Resistance Range,
ΔR/R max., After:
100 Ω to 100 kΩ
100 Ω to 2ꢀ0 kΩ
100 Ω to 100 kΩ
2000 h
≤ 0.0ꢀ %
≤ 0.0ꢀ %
≤ 0.0ꢀ %
Max. Resistance Change at P8ꢀ
for Resistance Range,
ΔR/R max., After:
100 Ω to 100 kΩ
100 Ω to 2ꢀ0 kΩ
100 Ω to 100 kΩ
1000 h
8000 h
≤ 0.02 %
≤ 0.04 %
≤ 0.12 %
≤ 0.02 %
≤ 0.04 %
≤ 0.12 %
≤ 0.02 %
≤ 0.04 %
≤ 0.12 %
22ꢀ 000 h
Permissible Voltage Against Ambient :
1 Minute; Uins
300 V
7ꢀ V
ꢀ00 V
7ꢀ V
800 V
7ꢀ V
Continuous
Failure Rate: FITobserved
≤ 0.1 x 10- 9/h
≤ 0.1 x 10- 9/h
≤ 0.1 x 10- 9/h
Note
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
www.vishay.com
88
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28726
Revision: 12-Oct-09
UXA 0204, UXB 0207, UXE 0414
High Precision Thin Film Leaded Resistors
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION UX SERIES
PART NUMBER: UXB02070F1001AC100
U
X
B
0
2
0
7
0
F
1
0
0
1
A
C
1
0
0
MODEL/SIZE
VARIANT
TCR
VALUE
TOLERANCE
PACKAGING (1)
SPECIAL
UXA0204
UXB0207
UXE0414
0 = Neutral
H = 2 ppm/K
G = ꢀ ppm/K
F = 10 ppm/K
3 digit value
1 digit multiplier
MULTIPLIER
9 = *10-1 2 = *102
0 = *100 3 = *103
1 = *101 4 = *104
T = 0.01 %
A = 0.0ꢀ %
B = 0.1 %
C = 0.2ꢀ %
C1
CU
R1
R2
RP
Up to 2 digits
00 = Standard
PRODUCT DESCRIPTION: UXB 0207-10 0.05 % C1 1K0
UXB
0207
10
0.05 %
C1
1K0
MODEL
SIZE
TCR
TOLERANCE
PACKAGING (1)
RESISTANCE VALUE
UXA
UXB
UXE
0204
0207
0414
2 ppmꢀK
5 ppmꢀK
10 ppmꢀK
0.01 %
0.05 %
0.1 %
C1
CU
R1
R2
RP
1K0 = 1.0 kΩ
47K = 47 kΩ
50R5 = ꢀ0.ꢀ Ω
0.25 %
Notes
(1) Please refer to table PACKAGING, see next page
• The PART NUMBER is shown to facilitate the introduction of a unified part numbering system.
DIMENSIONS
L
D
M
I
I
d
DIMENSIONS - Leaded resistor types, mass and relevant physical dimensions
Dmax.
(mm)
1.6
Lmax.
(mm)
3.6
dnom.
(mm)
0.ꢀ
Imin.
(mm)
29.0
28.0
31.0
Mmin.
(mm)
ꢀ.0
7.ꢀ
1ꢀ.0
MASS
(mg)
12ꢀ
220
7ꢀ0
TYPE
UXA 0204
UXB 0207
UXE 0414
2.ꢀ
6.3
0.6
4.0
11.9
0.8
SCRIPT MARKING - Printed resistance value and letter coding for TCR and tolerance
TOL.
(%)
TCR
(ppmꢀK)
RESISTANCE VALUE
LETTER CODE
LETTER CODE
0.2ꢀ
0.1
0.0ꢀ
0.01
C
B
A
T
10
0ꢀ
02
-
B
A
T
-
Clear text code for value
PACKAGING
REEL
BANDOLIER ON REEL
BOX
MODEL
CODE
PIECESꢀBOX
CODE
100
1000
100
1000
100
1000
CU
C1
CU
C1
CU
C1
UXA
UXB
UXE
1000
R1
1000
ꢀ000
R1
RP
2ꢀ00
R2
Document Number: 28726
Revision: 12-Oct-09
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
89
UXA 0204, UXB 0207, UXE 0414
High Precision Thin Film Leaded Resistors
Vishay Beyschlag
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
RESISTANCE VALUE (1)
DESCRIPTION
TCR
TOLERANCE
UXA 0204
UXB 0207
UXE 0414
0.2ꢀ %
0.1 %
22 Ω to 221 kΩ
43 Ω to 221 kΩ
100 Ω to 180 kΩ
200 Ω to 1ꢀ0 kΩ
47 Ω to 1ꢀ0 kΩ
47 Ω to 1ꢀ0 kΩ
100 Ω to 1ꢀ0 kΩ
200 Ω to 1ꢀ0 kΩ
100 Ω to 100 kΩ
100 Ω to 100 kΩ
1ꢀ0 Ω to 100 kΩ
200 Ω to 100 kΩ
10 Ω to 1 MΩ
-
10 Ω to 1 MΩ
22 Ω to ꢀ11 kΩ
10 ppm/K (2)
0.0ꢀ %
0.01 %
0.2ꢀ %
0.1 %
24 Ω to 301 kΩ
24 Ω to 301 kΩ
10 Ω to 1 MΩ
100 Ω to 301 kΩ
-
-
10 Ω to 1 MΩ
47 Ω to 301 kΩ
0ꢀ ppm/K (2)
02 ppm/K (3)
0.0ꢀ %
0.01 %
0.2ꢀ %
0.1 %
24 Ω to 221 kΩ
24 Ω to 221 kΩ
100 Ω to 1ꢀ0 kΩ
100 Ω to 1ꢀ0 kΩ
1ꢀ0 Ω to 1ꢀ0 kΩ
200 Ω to 1ꢀ0 kΩ
100 Ω to 301 kΩ
-
-
-
-
-
0.0ꢀ %
0.01 %
Notes
(1)
Resistance values to be selected from the E192 series, for other values please contact the factory
(2) TCR 10 and TCR 0ꢀ are specified over the temperature range from - 20 °C to + 8ꢀ °C
(3)
TCR 02 is specified over the temperature range from 0 °C to + 60 °C
cleaning solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system. The resistors are completely lead (Pb)-free,
the pure tin plating provides compatibility with lead (Pb)-free
and lead-containing soldering processes. The immunity of
DESCRIPTION
Production is strictly controlled and follows an extensive set
of instructions established for reproducibility.
A
homogeneous film of metal alloy is deposited on a high grade
ceramic body (8ꢀ % Al2O3) and conditioned to achieve the
desired temperature coefficient. Nickel plated steel
termination caps are firmly pressed on the metallized rods.
Special laser devices are used repeatedly to achieve the
target value by slowly and smoothly cutting a helical groove
in the resistive layer without damaging the ceramics. A
further conditioning is applied in order to stabilise the
trimming result. Connecting wires of electrolytic copper
plated with pure tin are welded to the termination caps. The
resistors are covered by protective coating designed for
electrical, mechanical and climatic protection.The
terminations receive a final pure tin on nickel plating. Script
marking designates the resistance value plus coded TCR
and tolerance.
the plating against tin whisker growth has been proven under
(4)
extensive testing. All products comply with GADSL
the CEFIC-EECA-EICTA
and
(ꢀ)
list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
• 2000/ꢀ3/EC End of Vehicle Life Directive (ELV) and
Annex II (ELVII)
• 2002/9ꢀ/EC Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electrical Equipment
Directive (WEEE)
The result of the determined production is verified by an
accelerated ageing (burn-in) and extensive testing
procedure performed on 100 % of the individual resistors.
Only accepted products are stuck directly on the adhesive
tapes in accordance with IEC 60286-1.
APPROVALS
Where applicable, the resistors are tested in accordance with
CECC 40101-806 which refers to EN 60115-1 and
EN 140100.
Vishay BEYSCHLAG has achieved “Approval of
Manufacturer” in accordance with IEC QC 001002-3,
clause 2. The release certificate for “Technology Approval
Schedule” in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
BEYSCHLAG manufacturing process.
ASSEMBLY
The resistors are suitable for processing on automatic
insertion equipment and cutting and bending machines.
Excellent solderability is proven, even after extended
storage. They are suitable for automatic soldering using
wave or dipping. The encapsulation is resistant to all
Notes
(4)
Global Automotive Declarable Substance List, see www.gadsl.org
(ꢀ)
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European
trade organisation representing the information and communications technology and consumer electronics), see
www.eicta.org/index.php?id=10ꢀ3&id_article=340
www.vishay.com
90
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28726
Revision: 12-Oct-09
UXA 0204, UXB 0207, UXE 0414
High Precision Thin Film Leaded Resistors
Vishay Beyschlag
FUNCTIONAL DESCRIPTION
P
UXE 0414
UXB 0207
UXA 0204
0.2
W
0.1
0
50
100
150
- 50
0
85
°C
Ambient Temperature ϑ amb
Specification of TCR 02 is valid from 0 °C to 60 °C.
Derating - Precision Operation
rT
UXA 0204
UXB 0207
UXE 0414
60
40
K
20
0
0.7
W
0.8
0.1
0.2
0.3
0.4
0.5
0.6
0
Load
P
Rise of the surface temperature.
Temperature Rise
1
A
1
uVꢀV
0.1
UXA 0204
UXB 0207
UXE 0401
0.01
1 kΩ
10 kΩ
100 kΩ
1 MΩ
Ambient Temperature
R
Current Noise A1 in accordance with IEC 6019ꢀ
Document Number: 28726
Revision: 12-Oct-09
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
91
UXA 0204, UXB 0207, UXE 0414
High Precision Thin Film Leaded Resistors
Vishay Beyschlag
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with the
following specifications:
LCT/UCT/ꢀ6 (rated temperature range: Lower category
temperature, upper category temperature; damp heat, long
term, ꢀ6 days) is valid.
EN 6011ꢀ-1, Generic specification (includes tests)
Unless otherwise specified the following values apply:
Temperature: 1ꢀ °C to 3ꢀ °C
EN 140100, Sectional specification (includes schedule for
qualification approval)
CECC 40101-806, Detail specification (includes schedule for
conformance inspection)
Relative humidity: 4ꢀ % to 7ꢀ %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
Most of the components are approved in accordance with the
European CECC-system, where applicable. The Test
Procedures and Requirements table contains only the most
important tests. For the full test schedule refer to the
documents listed above. The testing also covers most of the
requirements specified by EIA/IS-703 and JIS-C-ꢀ202.
For testing the components are mounted on a test board in
accordance with IEC 6011ꢀ-1, 4.31 unless otherwise
specified.
In the Test Procedures and Requirements table only the
tests and requirements are listed with reference to the
relevant clauses of IEC 6011ꢀ-1 and IEC 60068-2-xx test
method. A short description of the test procedure is also
given.
The tests are carried out in accordance with IEC 60068-2-xx
test method and under standard atmospheric conditions in
accordance with IEC 60068-1, ꢀ.3. Climatic category
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2-xx
TEST
METHOD
IEC
60115-1
CLAUSE
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
TEST
PROCEDURE
Stability for product
types:
22 Ω to < 100 Ω;
> 100 kΩ to 221 kΩ
UXA 0204
100 Ω to 100 kΩ
100 Ω to 2ꢀ0 kΩ
100 Ω to 100 kΩ
-
40.2 Ω to < 100 Ω;
> 2ꢀ0 kΩ to 301 kΩ
10 Ω to < 40.2 Ω;
> 301 kΩ to 1 MΩ
UXB 0207
UXE 0414
22 Ω to < 100 Ω;
> 100 kΩ to ꢀ11 kΩ
-
Resistance
(ΔR/R)
4.ꢀ
4.8
-
-
0.2ꢀ %; 0.1 %; 0.0ꢀ %; 0.01 %
10 ppm/K; 0ꢀ ppm/K; 02 ppm/K
Temperature
coefficient
At 20/LCT/20 °C and
20/UCT/20 °C
Room temperature;
U = P70 x R or
4.2ꢀ.1
-
Endurance
U = Umax.
;
1.ꢀ h ON; 0.ꢀ h OFF
70 °C; 2000 h
(0.0ꢀ % R + 0.01 Ω)
(0.0ꢀ % R + 0.01 Ω)
(0.03 % R + 0.01 Ω)
(0.06 % R + 0.01 Ω)
(0.0ꢀ % R + 0.01 Ω)
8ꢀ °C; 1000 h
(0.02 % R + 0.01 Ω)
(0.04 % R + 0.01 Ω)
(0.04 % R + 0.01 Ω)
(0.08 % R + 0.01 Ω)
8ꢀ °C; 8000 h
Endurance at
upper category
temperature
4.2ꢀ.3
4.24
-
12ꢀ °C; 1000 h
(0.04 % R + 0.01 Ω)
(0.04 % R + 0.01 Ω)
(0.06 % R + 0.01 Ω)
(0.0ꢀ % R + 0.01 Ω)
(0.08 % R + 0.01 Ω)
(0.06 % R + 0.01 Ω)
Damp heat,
steady state
(40 2) °C; ꢀ6 days; (93
78 (Cab)
3) % RH
www.vishay.com
92
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28726
Revision: 12-Oct-09
UXA 0204, UXB 0207, UXE 0414
High Precision Thin Film Leaded Resistors
Vishay Beyschlag
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2-xx
TEST
METHOD
IEC
60115-1
CLAUSE
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
TEST
PROCEDURE
Stability for product
types:
22 Ω to < 100 Ω;
> 100 kΩ to 221 kΩ
UXA 0204
100 Ω to 100 kΩ
100 Ω to 2ꢀ0 kΩ
100 Ω to 100 kΩ
-
40.2 Ω to < 100 Ω;
> 2ꢀ0 kΩ to 301 kΩ
10 Ω to < 40.2 Ω;
> 301 kΩ to 1 MΩ
UXB 0207
UXE 0414
22 Ω to < 100 Ω;
> 100 kΩ to ꢀ11 kΩ
-
Climatic
sequence:
4.23
4.23.2
2 (Ba)
Dry heat
12ꢀ °C; 16 h
ꢀꢀ °C; 24 h;
90 % to 100 % RH;
1 cycle
Damp heat,
cyclic
4.23.3
30 (Db)
4.23.4
4.23.ꢀ
1 (Aa)
13 (M)
Cold
- ꢀꢀ °C; 2 h
Low air
pressure
8.ꢀ kPa; 2 h;
1ꢀ °C to 3ꢀ °C
ꢀꢀ °C; ꢀ days;
9ꢀ % to 100 % RH;
ꢀ cycles
Damp heat,
cyclic
(0.04 % R + 0.01 Ω)
no visible damage
(0.0ꢀ % R + 0.01 Ω)
no visible damage
(0.06 % R + 0.01 Ω)
no visible damage
4.23.6
4.13
30 (Db)
-
Room temperature;
U = 2.ꢀ x P70 x R or
U = 2 x Umax.; ꢀ s
Short time
overload
(0.01 % R + 0.01 Ω)
no visible damage
(0.01 % R + 0.01 Ω)
no visible damage
(0.02 % R + 0.01 Ω)
no visible damage
30 min at LCT = - ꢀꢀ °C
30 min at UCT = 12ꢀ °C
Rapid change
of temperature
4.19
14 (Na)
(0.01 % R + 0.01 Ω)
(0.01 % R + 0.01 Ω)
(0.02 % R + 0.01 Ω)
ꢀ cycles
no visible damage
no visible damage
no visible damage
Component
solvent
resistance
Isopropyl alcohol
+ 23 °C; toothbrush
method
Marking legible;
no visible damage
4.29
4ꢀ (XA)
20 (Tb)
Unmountedcomponents;
(260 3) °C;
Resistance to
soldering heat
(0.01 % R + 0.01 Ω)
no visible damage
(0.01 % R + 0.01 Ω)
no visible damage
(0.02 % R + 0.01 Ω)
no visible damage
4.18.2
(10 1) s
+ 23ꢀ °C; 2 s
solder bath method
SnPb40
Good tinning
(≥ 9ꢀ % coverage, no visible damage)
4.17
4.22
20 (Ta)
6 (B4)
Solderability
Vibration
+ 24ꢀ °C; 3 s
solder bath method
SnAg3Cu0.ꢀ
6 h; 10 Hz to 2000 Hz
1.ꢀ mm or 196 m/s2
(0.01 % R + 0.01 Ω)
(0.01 % R + 0.01 Ω)
(0.02 % R + 0.01 Ω)
21 (Ua1)
21 (Ub)
21 (Uc)
Robustness of
terminations
Tensile, bending and
torsion
4.16
4.7
(0.01 % R + 0.01 Ω)
(0.01 % R + 0.01 Ω)
(0.02 % R + 0.01 Ω)
-
Voltage proof
URMS = Uins; 60 s
No flashover or breakdown
Document Number: 28726
Revision: 12-Oct-09
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
93
UXA 0204, UXB 0207, UXE 0414
High Precision Thin Film Leaded Resistors
Vishay Beyschlag
12NC INFORMATION FOR HISTORICAL CODING REFERENCE
• The resistors have a 12-digit Part Number starting with
Last Digit of 12NC Indicating Resistance Decade
2312.
RESISTANCE DECADE
LAST DIGIT
• The subsequent 4 digits indicate the resistor type,
specification and packaging; see the 12NC Part Number
table.
10 Ω to 99.9 Ω
100 Ω to 999 Ω
1 kΩ to 9.99 kΩ
10 kΩ to 99.9 kΩ
100 kΩ to 999 kΩ
9
1
2
3
4
• The remaining 4 digits indicate the resistance value:
- The first 3 digits indicate the resistance value.
- The last digit indicates the resistance decade in
accordance with the 12NC Indicating Resistance
Decade table.
12NC Example
The Part Number of a UXA 0204 resistor, value 47 kΩ and
TCR 10 with 0.1 % tolerance, supplied on bandolier in a
box of 1000 units is: 2312 662 34703.
12NC PART NUMBER - Resistor type and packaging
2312 ... .....
DESCRIPTION
TCR
BANDOLIER
IN BOX
BANDOLIER
IN BOX
BANDOLIER
ON REEL
BANDOLIER
ON REEL
BANDOLIER
ON REEL
TYPE
TOL.
CU 100 units
C1 1000 units
R1 1000 units
R2 2500 units
RP 5000 units
0.2ꢀ %
0.1 %
0.0ꢀ %
0.01 %
(1)
ꢀ62 2....
ꢀ62 3....
ꢀ62 4....
ꢀ62 7....
ꢀ62 91...
ꢀ63 2....
ꢀ63 3....
ꢀ63 4....
ꢀ63 7....
ꢀ63 91...
ꢀ64 2....
ꢀ64 3....
ꢀ64 4....
ꢀ64 7....
ꢀ64 91...
ꢀ72 2....
ꢀ72 3....
ꢀ72 4....
ꢀ72 7....
ꢀ72 91...
ꢀ73 2....
ꢀ73 3....
ꢀ73 4....
ꢀ73 7....
ꢀ73 91...
ꢀ74 2....
ꢀ74 3....
ꢀ74 4....
ꢀ74 7....
ꢀ74 91...
ꢀ92 3....
ꢀ92 4....
ꢀ92 91...
ꢀ93 3....
ꢀ93 4....
ꢀ93 91...
662 2....
662 3....
662 4....
662 7....
662 91...
663 2....
663 3....
663 4....
663 7....
663 91...
664 2....
664 3....
664 4....
664 7....
664 91...
672 2....
672 3....
672 4....
672 7....
672 91...
673 2....
673 3....
673 4....
673 7....
673 91....
674 2....
674 3....
674 4....
674 7....
674 91...
692 3....
692 4....
692 91...
693 3....
693 4....
693 91...
462 2....
462 3....
462 4....
462 7....
462 91...
463 2....
463 3....
463 4....
463 7....
463 91...
464 2....
464 3....
464 4....
464 7....
464 91...
472 2....
472 3....
472 4....
472 7....
472 91...
473 2....
473 3....
473 4....
473 7....
473 91...
474 2....
474 3....
474 4....
474 7....
474 91...
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10 ppm/K
0ꢀ ppm/K
02 ppm/K
10 ppm/K
0ꢀ ppm/K
02 ppm/K
0.2ꢀ %
0.1 %
0.0ꢀ %
0.01 %
(1)
UXA 0204
0.2ꢀ %
0.1 %
0.0ꢀ %
0.01 %
(1)
0.2ꢀ %
0.1 %
0.0ꢀ %
0.01 %
(1)
ꢀ77 2....
ꢀ77 3....
ꢀ77 4....
ꢀ77 7....
ꢀ77 91...
ꢀ78 2....
ꢀ78 3....
ꢀ78 4....
ꢀ78 7....
ꢀ78 91...
ꢀ79 2....
ꢀ79 3....
ꢀ79 4....
ꢀ79 7....
ꢀ79 91...
-
0.2ꢀ %
0.1 %
0.0ꢀ %
0.01 %
(1)
UXB 0207
0.2ꢀ %
0.1 %
0.0ꢀ %
0.01 %
(1)
0.1 %
0.0ꢀ %
(1)
ꢀ97 3....
ꢀ97 4....
ꢀ97 91...
ꢀ98 3....
ꢀ98 4....
ꢀ98 91...
10 ppm/K
0ꢀ ppm/K
-
-
-
-
-
-
-
-
UXE 0414
0.1 %
0.0ꢀ %
(1)
-
-
Note
(1)
Readable 12NC coding of resistance values is restricted to values with three significant digits. For resistance values with more than three
significant digits, a non readable sequential number will be issued by the factory for each requested combination of resistance value and
tolerance.
www.vishay.com
94
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28726
Revision: 12-Oct-09
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
UXA02040F9090AR100
Fixed Resistor, Thin Film, 0.1W, 909ohm, 200V, 0.05% +/-Tol, -10,10ppm/Cel,
VISHAY
UXA02040F9091BR100
Fixed Resistor, Thin Film, 0.1W, 9090ohm, 200V, 0.1% +/-Tol, -10,10ppm/Cel,
VISHAY
UXA02040F9421CR100
Fixed Resistor, Thin Film, 0.1W, 9420ohm, 200V, 0.25% +/-Tol, -10,10ppm/Cel,
VISHAY
UXA02040F9530CR100
Fixed Resistor, Thin Film, 0.1W, 953ohm, 200V, 0.25% +/-Tol, -10,10ppm/Cel,
VISHAY
UXA02040F9889BR100
Fixed Resistor, Thin Film, 0.1W, 98.8ohm, 200V, 0.1% +/-Tol, -10,10ppm/Cel,
VISHAY
©2020 ICPDF网 联系我们和版权申明