V-730P106X5100 [VISHAY]
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 100 V, 10 uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT;
| 型号： | V-730P106X5100 |
| 厂家： | 
VISHAY |
| 描述： | CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 100 V, 10 uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT 电容器 |
| 文件： | 总4页 (文件大小：67K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
V-730 P
Vishay Sprague
Film Capacitors High Frequency, Wrap-and-Fill,
Metallized Polypropylene
FEATURES
• Excellent AC performance
• Low power dissipation
• Low dielectric absorption
• Close tolerance
• High stability
• Compliant to RoHS directive 2002/95/EC
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
DC Life Test: 150 % of rated voltage for 1000 h at + 85 °C.
No open or short circuits. No visible damage.
Maximum Δ CAP 1.0 %
Voltage Derating: At + 105 °C, 50 % of + 85 °C rating
ESR: 20 kHz to 100 kHz
Minimum IR = 50 % of initial limit
Maximum DF = 0.12 %
Capacitance Range: 0.022 µF to 10.0 µF
Capactiance Tolerance: 20 %, 10 %, 5 %
DC Voltage Rating: 100 WVDC to 630 WVDC
AC Voltage Rating: 70 VRMS to 275 VRMS, 60 Hz to 400 Hz
Humidity Test: 95 % relative humidity at + 40 °C for 250 h.
No visible damage.
Maximum Δ CAP 1.0 %
Minimum IR = 20 % of initial limit
Maximum DF = 0.12 %
Dissipation Factor: 0.1 % maximum
AC Life Test: 110 % of rated RMS voltage at 60 Hz for
1000 h at + 85 °C.
Maximum Δ CAP 5 %
Minimum IR = 50 % of initial limit
Maximum DF = 0.12 %
Measure all units at 1000 Hz, at + 25 °C
DC Voltage Test: 200 % of rated voltage for 2 min
AC Voltage Test: 130 % of rated RMS voltage at 60 Hz for
15 s
Insulation Resistance: Measured at 100 WVDC after a
2 min charge.
PHYSICAL CHARACTERISTICS
Lead Pull: 5 lb (2.3 kg) for one min. No physical damage.
Lead Bend: After three complete consecutive bends. No
damage.
Marking: Sprague® trademark, type or part number,
capacitance and voltage.
At + 25 °C: 200 000 MΩ/µF or 400 000 MΩ minimum
At + 85 °C: 10 000 MΩ/µF or 20 000 MΩ minimum
At + 105 °C: 1000 MΩ/µF or 2000 MΩ minimum
Vibration Test (Condition B): No mechanical damage,
short, open or intermittent circuits.
DIMENSIONS in inches [millimeters]
1.750
1.750
[44.45]
Min.
L
D
Max.
[44.45]
0.062 [1.57]
Min.
Solid Tinned Wire (1)
0.032 [0.81] Nominal Dia.
(No. 20 AWG)
Note
(1) Leads to be within 0.062" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge.
Document Number: 42092
Revision: 12-Mar-09
For technical questions, contact: spresale@vishay.com
www.vishay.com
25
V-730 P
Film Capacitors High Frequency, Wrap-and-Fill,
Metallized Polypropylene
Vishay Sprague
STANDARD RATINGS in inches [millimeters]
ESR
(mΩ)
MAXIMUM RIPPLE CURRENT
(ARMS) at 20 kHz
CASE SIZE
CAPACITANCE
(µF)
PART NUMBER (1)
20 kHz
to
CASE TEMPERATURE (2) at
100 kHz
D
L
+ 25 °C + 35 °C + 45 °C + 55 °C + 65 °C + 75 °C + 85 °C
100 WVDC
-
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
V-730P224X9100
V-730P274X9100
V-730P334X9100
V-730P394X9100
V-730P474X9100
V-730P564X9100
V-730P684X9100
V-730P824X9100
V-730P105X9100 0.421 [10.7] 1.00 [25.4]
V-730P125X9100 0.454 [11.5] 1.00 [25.4]
V-730P155X9100 0.500 [12.7] 1.00 [25.4]
V-730P185X9100 0.541 [13.7] 1.00 [25.4]
V-730P205X9100 0.486 [12.3] 1.25 [31.8]
V-730P225X9100 0.507 [12.9] 1.25 [31.8]
V-730P275X9100 0.554 [14.1] 1.25 [31.8]
V-730P305X9100 0.581 [14.8] 1.25 [31.8]
V-730P335X9100 0.606 [15.4] 1.25 [31.8]
V-730P395X9100 0.654 [16.6] 1.25 [31.8]
V-730P405X9100 0.537 [13.6] 1.75 [44.5]
V-730P475X9100 0.577 [14.7] 1.75 [44.5]
V-730P505X9100 0.593 [15.1] 1.75 [44.5]
V-730P565X9100 0.624 [15.8] 1.75 [44.5]
V-730P605X9100 0.644 [16.4] 1.75 [44.5]
V-730P685X9100 0.682 [17.3] 1.75 [44.5]
V-730P805X9100 0.735 [18.7] 1.75 [44.5]
V-730P825X9100 0.743 [18.9] 1.75 [44.5]
V-730P106X9100 0.815 [20.7] 1.75 [44.5]
0.275 [7.0] 0.75 [19.0]
0.298 [7.6] 0.75 [19.0]
0.324 [8.2] 0.75 [19.0]
0.347 [8.8] 0.75 [19.0]
0.376 [9.6] 0.75 [19.0]
0.321 [8.2] 1.00 [25.4]
0.348 [8.8] 1.00 [25.4]
0.377 [9.6] 1.00 [25.4]
2.3
2.6
2.8
3.1
3.7
3.9
4.1
4.3
5.5
5.7
6.1
6.3
6.5
6.8
7.1
7.3
7.4
7.6
7.8
8.1
8.3
8.4
8.5
8.5
8.6
8.8
9.0
2.3
2.6
2.8
3.1
3.4
3.6
3.8
4.0
5.1
5.3
5.5
5.7
6.0
6.3
6.5
6.7
6.8
6.9
7.0
7.4
7.6
7.7
7.8
8.0
8.3
8.6
9.0
2.3
2.6
2.8
3.1
3.1
3.3
3.5
3.6
4.7
4.9
5.1
5.3
5.5
5.7
6.0
6.2
6.4
6.6
6.7
6.8
7.0
7.1
7.2
7.4
7.7
8.0
8.5
2.3
2.6
2.8
3.1
2.8
2.9
3.1
3.2
4.2
4.4
4.6
4.8
4.9
5.1
5.3
5.5
5.6
5.8
5.9
6.0
6.2
6.4
6.5
6.7
6.8
7.0
7.6
2.3
2.4
2.6
2.9
2.5
2.6
2.8
2.9
3.6
3.8
4.0
4.1
4.2
4.4
4.6
4.8
4.9
5.1
5.2
5.3
5.4
5.5
5.6
5.7
6.0
6.1
6.6
1.8
1.9
2.2
2.3
2.0
2.1
2.2
2.3
2.8
3.0
3.2
3.4
3.5
3.6
3.7
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.4
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
2.6
2.8
3.1
3.0
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.9
-
-
-
37.0
35.0
33.0
31.0
26.0
24.0
20.0
19.0
18.0
18.0
17.0
16.0
16.0
15.0
15.0
15.0
14.0
14.0
14.0
13.0
13.0
13.0
12.0
250 WVDC
-
1.2
1.5
1.8
2.0
2.2
2.7
3.0
3.3
3.9
4.0
4.7
5.0
5.6
6.0
6.8
8.0
8.2
10.0
0.1
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
V-730P104X9250
V-730P124X9250
V-730P154X9250
V-730P184X9250
V-730P224X9250
V-730P274X9250
V-730P334X9250
V-730P394X9250
0.279 [7.1] 0.75 [19.0]
0.300 [7.6] 0.75 [19.0]
0.327 [8.3] 0.75 [19.0]
0.353 [9.0] 0.75 [19.0]
0.306 [7.8] 1.00 [25.4]
0.333 [8.5] 1.00 [25.4]
0.362 [9.2] 1.00 [25.4]
0.389 [9.9] 1.00 [25.4]
1.5
1.9
2.3
2.7
1.9
2.4
2.9
3.4
3.8
3.9
4.0
4.2
4.4
4.7
5.1
5.9
7.2
8.4
8.6
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
1.5
1.9
2.3
2.7
1.9
2.4
2.9
3.4
3.7
3.8
3.9
4.1
4.4
4.6
5.0
5.8
7.2
7.5
7.8
8.3
8.4
8.5
8.6
8.8
9.0
9.0
9.0
9.0
9.0
9.0
9.0
1.5
1.9
2.3
2.7
1.9
2.4
2.9
3.4
3.6
3.7
3.8
4.0
4.4
4.5
4.9
5.7
6.8
7.0
7.3
7.6
7.8
8.0
8.2
8.5
8.8
8.9
9.0
9.0
9.0
9.0
9.0
1.5
1.9
2.3
2.7
1.9
2.4
2.9
3.2
3.4
3.5
3.7
3.9
4.4
5.0
5.4
5.7
6.0
6.3
6.6
6.8
7.0
7.2
7.4
7.7
7.9
8.0
8.2
8.4
8.7
8.8
8.9
1.5
1.9
2.3
2.5
1.9
2.4
2.9
2.9
2.9
3.1
3.2
3.4
4.3
4.5
4.7
5.0
5.2
5.4
5.7
5.9
6.0
6.2
6.3
6.6
6.8
7.0
7.2
7.4
7.8
7.9
8.3
1.5
1.7
1.9
2.0
1.9
2.2
2.3
2.3
2.4
2.5
2.6
2.8
3.5
3.7
3.9
4.1
4.3
4.5
4.7
4.8
4.9
5.0
5.1
5.3
5.6
5.8
5.9
6.0
6.3
6.4
6.8
0.9
1.1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
3.2
3.3
3.5
3.7
3.9
4.1
4.3
4.4
4.5
4.6
4.7
4.9
5.1
5.3
5.5
5.6
5.8
5.9
6.2
-
-
-
-
-
-
-
V-730P474X9250 0.422 [10.7] 1.00 [25.4]
V-730P564X9250 0.464 [11.8] 1.00 [25.4]
V-730P684X9250 0.425 [10.8] 1.25 [31.8]
V-730P824X9250 0.471 [12.0] 1.25 [31.8]
V-730P105X9250 0.513 [13.0] 1.25 [31.8]
V-730P125X9250 0.554 [14.1] 1.25 [31.8]
V-730P155X9250 0.613 [15.6] 1.25 [31.8]
V-730P185X9250 0.667 [17.0] 1.25 [31.8]
V-730P205X9250 0.700 [17.8] 1.25 [31.8]
V-730P225X9250 0.610 [15.5] 1.75 [44.5]
V-730P275X9250 0.669 [17.0] 1.75 [44.5]
V-730P305X9250 0.703 [17.9] 1.75 [44.5]
V-730P335X9250 0.734 [18.6] 1.75 [44.5]
V-730P395X9250 0.794 [20.2] 1.75 [44.5]
V-730P405X9250 0.803 [20.4] 1.75 [44.5]
V-730P475X9250 0.866 [22.0] 1.75 [44.5]
V-730P505X9250 0.892 [22.7] 1.75 [44.5]
V-730P565X9250 0.941 [23.9] 1.75 [44.5]
V-730P605X9250 0.972 [24.7] 1.75 [44.5]
V-730P685X9250 0.882 [22.4] 2.25 [57.2]
V-730P805X9250 0.953 [24.2] 2.25 [57.2]
V-730P825X9250 0.964 [24.5] 2.25 [57.2]
V-730P106X9250 1.060 [26.9] 2.25 [57.2]
35.0
33.0
32.0
31.0
28.0
27.0
26.0
25.0
21.0
20.0
19.0
18.0
18.0
17.0
16.0
16.0
15.0
15.0
15.0
15.0
14.0
14.0
13.0
1.2
1.5
1.8
2.0
2.2
2.7
3.0
3.3
3.9
4.0
4.7
5.0
5.6
6.0
6.8
8.0
8.2
10.0
Notes
Other capacitance values and voltage ratings are available upon request
(1)
Part Numbers listed are for a capacitance tolerance of 10 %. To specifiy 20 % tolerance, change the “X9” in the Part Number to “X0”;
for 5 %, from “X9” to “X5”.
The peak current pulse capability ot these capacitors is 10 A/µF. The maximum rate voltage change is 10 V/µs.
(2)
www.vishay.com
26
For technical questions, contact: spresale@vishay.com
Document Number: 42092
Revision: 12-Mar-09
V-730 P
Film Capacitors High Frequency, Wrap-and-Fill,
Metallized Polypropylene
Vishay Sprague
STANDARD RATINGS in inches [millimeters]
ESR
(mΩ)
20 kHz to
100 kHz
MAXIMUM RIPPLE CURRENT
CASE SIZE
CAPACITANCE
(µF)
(ARMS) at 20 kHz
PART NUMBER(1)
CASE TEMPERATURE (2) at
+ 25 °C + 35 °C + 45 °C + 55 °C + 65 °C + 75 °C + 85 °C
D
L
400 WVDC
0.047
0.056
0.068
0.082
0.1
0.12
0.15*
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
V-730P473X9400 0.258 [6.6] 0.75 [19.0]
V-730P563X9400 0.275 [7.0] 0.75 [19.0]
V-730P683X9400 0.297 [7.5] 0.75 [19.0]
V-730P823X9400 0.320 [8.1] 0.75 [19.0]
V-730P104X9400 0.348 [8.8] 0.75 [19.0]
V-730P124X9400 0.299 [7.6] 1.00 [25.4]
V-730P154X9400 0.328 [8.3] 1.00 [25.4]
V-730P184X9400 0.353 [9.0] 1.00 [25.4]
V-730P224X9400 0.385 [9.8] 1.00 [25.4]
V-730P274X9400 0.421 [10.7] 1.00 [25.4]
V-730P334X9400 0.469 [11.9] 1.00 [25.4]
V-730P394X9400 0.503 [12.8] 1.00 [25.4]
V-730P474X9400 0.545 [13.8] 1.00 [25.4]
V-730P564X9400 0.506 [12.9] 1.25 [31.8]
V-730P684X9400 0.551 [14.0] 1.25 [31.8]
V-730P824X9400 0.599 [15.2] 1.25 [31.8]
V-730P105X9400 0.655 [16.6] 1.25 [31.8]
V-730P125X9400 0.712 [18.1] 1.25 [31.8]
V-730P155X9400 0.658 [16.7] 1.75 [44.5]
V-730P185X9400 0.716 [18.2] 1.75 [44.5]
V-730P205X9400 0.752 [19.1] 1.75 [44.5]
V-730P225X9400 0.786 [20.0] 1.75 [44.5]
V-730P275X9400 0.865 [22.0] 1.75 [44.5]
V-730P305X9400 0.909 [23.1] 1.75 [44.5]
V-730P335X9400 0.951 [24.2] 1.75 [44.5]
V-730P395X9400 1.031 [26.2] 1.75 [44.5]
-
-
-
-
-
-
-
1.0
1.1
1.4
1.7
2.0
1.4
1.7
2.1
2.6
3.1
3.8
4.1
5.7
5.7
5.7
5.7
5.7
6.3
7.0
8.0
9.0
9.0
9.0
9.0
9.0
9.0
1.0
1.1
1.4
1.7
2.0
1.4
1.7
2.1
2.6
3.1
3.8
4.1
5.5
5.7
5.7
5.7
5.7
6.2
6.9
7.9
9.0
9.0
9.0
9.0
9.0
9.0
1.0
1.1
1.4
1.7
2.0
1.4
1.7
2.1
2.6
3.1
3.8
4.1
5.0
5.3
5.5
5.6
5.7
6.0
6.7
7.8
9.0
9.0
9.0
9.0
9.0
9.0
1.0
1.1
1.4
1.7
2.0
1.4
1.7
2.1
2.6
3.1
3.8
4.1
4.4
4.4
4.8
5.3
5.7
5.9
6.6
7.7
8.0
8.3
8.6
9.0
9.0
9.0
1.0
1.1
1.4
1.7
2.0
1.4
1.7
2.1
2.6
3.1
3.5
3.7
3.8
4.1
4.3
4.5
5.7
5.8
6.5
6.8
7.0
7.4
7.6
7.9
8.1
8.3
1.0
1.1
1.4
1.6
1.9
1.4
1.7
2.1
2.5
2.7
2.9
3.1
3.2
3.3
3.5
3.7
4.7
4.9
5.2
5.5
5.7
5.9
6.0
6.4
6.6
6.8
0.9
0.9
1.0
1.1
1.3
1.4
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.6
4.3
4.5
4.7
5.0
5.2
5.4
5.6
5.9
6.3
6.5
-
-
-
-
-
32.0
31.0
30.0
28.0
27.0
26.0
25.0
23.0
1.2
1.5
1.8
2.0
21.0
2.2
20.0
2.7
19.0
3.0
3.3
3.9
17.0
16.0
15.0
630 WVDC
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.1
V-730P223X9630 0.283 [7.2] 0.75 [19.0]
V-730P273X9630 0.307 [7.8] 0.75 [19.0]
V-730P333X9630 0.334 [8.5] 0.75 [19.0]
V-730P393X9630 0.358 [9.1] 0.75 [19.0]
V-730P473X9630 0.388 [9.9] 0.75 [19.0]
V-730P563X9630 0.418 [10.6] 0.75 [19.0]
V-730P683X9630 0.346 [8.8] 1.00 [25.4]
V-730P823X9630 0.374 [9.5] 1.00 [25.4]
V-730P104X9630 0.408 [10.4] 1.00 [25.4]
V-730P124X9630 0.443 [11.3] 1.00 [25.4]
V-730P154X9630 0.496 [12.6] 1.00 [25.4]
V-730P184X9630 0.538 [13.7] 1.00 [25.4]
V-730P224X9630 0.496 [12.6] 1.25 [31.8]
V-730P274X9630 0.542 [13.8] 1.25 [31.8]
V-730P334X9630 0.593 [15.1] 1.25 [31.8]
V-730P394X9630 0.639 [16.2] 1.25 [31.8]
V-730P474X9630 0.696 [17.7] 1.25 [31.8]
V-730P564X9630 0.608 [15.4] 1.75 [44.5]
V-730P684X9630 0.664 [16.9] 1.75 [44.5]
V-730P824X9630 0.724 [18.4] 1.75 [44.5]
V-730P105X9630 0.794 [20.2] 1.75 [44.5]
-
0.8
1.0
1.2
1.4
1.7
2.1
1.3
1.6
1.9
2.3
2.9
3.5
2.8
3.5
4.3
5.0
6.8
7.4
7.8
8.1
8.6
0.8
1.0
1.2
1.4
1.7
2.1
1.3
1.6
1.9
2.3
2.9
3.5
2.8
3.5
4.3
5.0
6.3
6.9
7.2
7.5
7.9
0.8
1.0
1.2
1.4
1.7
2.1
1.3
1.6
1.9
2.3
2.9
3.5
2.8
3.5
4.3
5.0
5.8
6.3
6.6
6.9
7.3
0.8
1.0
1.2
1.4
1.7
2.1
1.3
1.6
1.9
2.3
2.9
3.5
2.8
3.5
4.3
5.0
5.2
5.6
5.9
6.2
6.5
0.8
1.0
1.2
1.4
1.7
2.1
1.3
1.6
1.9
2.3
2.9
3.5
2.8
3.5
4.3
4.6
4.5
4.8
5.1
5.3
5.6
0.8
1.0
1.2
1.4
1.6
1.7
1.3
1.6
1.9
2.3
2.9
2.7
2.8
3.3
3.5
3.7
3.6
4.0
4.2
4.3
4.6
0.8
0.9
1.0
1.0
1.1
1.2
1.3
1.6
1.6
1.8
1.9
1.9
2.3
2.3
2.4
2.5
2.6
2.8
2.9
3.1
3.6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
28.0
26.0
25.0
22.0
18.0
Notes
Other capacitance values and voltage ratings are available on request
(1)
Part Numbers listed are for a capacitance tolerance of 10 %. To specifiy 20 % tolerance, change the “X9” in the Part Number to “X0”;
for 5 %, from “X9” to “X5”.
(2) The peak current pulse capability ot these capacitors is 10 A/µF. The maximum rate voltage change is 10 V/µs.
ORDERING INFORMATION
V-730P
224
X9
100
TYPE
CAPACITANCE
CAPACITANCE TOLERANCE
DC VOLTAGE RATING(3)
This is expressed in volts.
This is expressed in picofarads. The first two
digits are the significant figures. The third is
the number of zeros to follow.
X0 = 20 %
X9 = 10 %
X5 = 5 %
Note (3) At + 85 °C, AC RMS ratings for frequencies up to and including 400 Hz correspond to this table:
WVDC
Rated RMS Volts
100
70
250
175
400
275
630
275
Document Number: 42092
Revision: 12-Mar-09
For technical questions, contact: spresale@vishay.com
www.vishay.com
27
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号：
V-730P106X5250
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 250 V, 10 uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明