V20DL45-M3 [VISHAY]
Low-Voltage Trench MOS Barrier Schottky Rectifier;
| 型号： | V20DL45-M3 |
| 厂家： | 
VISHAY |
| 描述： | Low-Voltage Trench MOS Barrier Schottky Rectifier |
| 文件： | 总5页 (文件大小：126K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
V20DL45-M3, V20DL45HM3
www.vishay.com
Vishay General Semiconductor
Low-Voltage Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.31 V at IF = 5 A
FEATURES
• Trench MOS Schottky technology
TMBS® eSMP® Series
TO-263AC (SMPD)
• Very low profile - typical height of 1.7 mm
• Ideal for automated placement
K
• Low forward voltage drop, low power losses
• High efficiency operation
1
• Meets MSL level 1, per J-STD-020, LF maximum peak
2
of 260 °C
Top View
Bottom View
• AEC-Q101 qualified available
- Automotive ordering code; base P/NHM3
PIN 1
PIN 2
K
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
HEATSINK
TYPICAL APPLICATIONS
For use in high frequency DC/DC converters, switching
power supplies, freewheeling diodes, OR-ing diode, and
reverse battery protection.
PRIMARY CHARACTERISTICS
MECHANICAL DATA
Case: TO-263AC (SMPD)
Molding compound meets UL 94 V-0 flammability rating
IF(AV)
20 A
45 V
VRRM
Base P/N-M3
commercial grade
Base P/NHM3
AEC-Q101 qualified
-
halogen-free, RoHS-compliant, and
IFSM
VF at IF = 20 A (TA = 125 °C)
TJ max.
160 A
0.50 V
150 °C
- halogen-free, RoHS-compliant, and
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B,.....)
Package
TO-263AC (SMPD)
Single die
Diode variations
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
Polarity: as marked
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
V20DL45-M3, V20DL45HM3
UNIT
Maximum repetitive peak reverse voltage
Maximum average forward rectified current (fig. 1)
VRRM
45
20
V
A
(1)
IF(AV)
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load
IFSM
160
A
Operating junction and storage temperature range
TJ, TSTG
-40 to +150
°C
Note
(1)
With heatsink
Revision: 05-May-15
Document Number: 87786
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V20DL45-M3, V20DL45HM3
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TYP.
0.42
0.48
0.55
0.31
0.38
0.50
-
MAX.
UNIT
IF = 5 A
-
-
IF = 10 A
IF = 20 A
IF = 5 A
TA = 25 °C
0.64
-
(1)
Instantaneous forward voltage
VF
V
IF = 10 A
IF = 20 A
TA = 125 °C
-
0.58
2.5
50
TA = 25 °C
(2)
Reverse current
VR = 45 V
IR
mA
TA = 125 °C
20
Notes
(1)
Pulse test: 300 μs pulse width, 1 % duty cycle
Pulse test: pulse width 5 ms
(2)
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
V20DL45-M3, V20DL45HM3
UNIT
RJC
1.6
45
Typical thermal resistance
°C/W
(1)(2)
RJA
Notes
(1)
The heat generated must be less than the thermal conductivity from junction-to-ambient: dPD/dTJ < 1/RJA
Free air, without heatsink
(2)
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY
DELIVERY MODE
V20DL45-M3/I
0.54
0.54
0.54
I
I
I
2000/reel
2000/reel
2000/reel
13" diameter plastic tape and reel
13" diameter plastic tape and reel
13" diameter plastic tape and reel
V20DL45HM3/I (1)
V20DL45HM3_A/I (1)
Note
(1)
AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
24
20
16
12
8
14
12
10
8
D = 0.8
D = 0.5
D = 0.3
RthJA=RthJC=1.6oC/W
D = 0.2
D = 0.1
D = 1.0
6
RthJA=45oC/W
T
4
4
2
D = tp/T
tp
0
0
0
4
8
12
16
20
24
0
25
50
75
100
125
150
Average Forward Current (A)
Case Temperature (°C)
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Forward Power Loss Characteristics
Revision: 05-May-15
Document Number: 87786
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V20DL45-M3, V20DL45HM3
www.vishay.com
Vishay General Semiconductor
100
10
1
100
Junction to Ambient
TA = 150 °C
TA = 125 °C
10
1
TA = 100 °C
TA = 25 °C
0.1
0.1
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 6 - Typical Transient Thermal Impedance
Fig. 3 - Typical Instantaneous Forward Characteristics
50
100
TA = 150 °C
Epoxy printed circiut
board FR4 copper
thickness = 70μm
45
40
35
30
25
20
TA = 125 °C
10
TA = 100 °C
1
0.1
TA = 25 °C
S(cm2)
0.01
1
2
3
4
5
6
7
8
9
10
20
30
40
50
60
70
80
90 100
Copper Pad Areas (cm2)
Percent of Rated Peak Reverse Voltage (%)
Fig. 7 - Thermal Resistance Junction-to-Ambient vs.
Copper Pad Areas
Fig. 4 - Typical Reverse Characteristics
10 000
1000
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp
-p
0.1
1
10
100
Reverse Voltage (V)
Fig. 5 - Typical Junction Capacitance
Revision: 05-May-15
Document Number: 87786
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V20DL45-M3, V20DL45HM3
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-263AC (SMPD)
0.402 (10.20)
0.386 (9.80)
0.059 (1.50) REF.
0.071 (1.80)
0.063 (1.60)
0.020 (0.52)
0.011 (0.27)
0.048 (1.21)
0.032 (0.81)
0.354 (8.99)
0.338 (8.59)
0.509 (12.93)
0.485 (12.33)
0 to 0.01
(0 to 0.254)
0.069 (1.74)
0.053 (1.34)
0.063 (1.60)
0.047 (1.20)
0.020 (0.52)
0.011 (0.27)
0.052 (1.23)
0.028 (0.72)
0.200
(5.08)
NOM.
Mounting Pad Layout
0.420 (10.66) MIN.
0.339 (8.60)
0.323 (8.20)
0.276 (7.00)
0.260 (6.60)
0.330
(8.38)
REF.
0.194
(4.93)
NOM.
0.604 (15.33)
0.525 (13.33)
0.120 (3.05) REF.
0.105 (2.67)
0.095 (2.41)
0.080 (2.03) MIN.
Revision: 05-May-15
Document Number: 87786
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
Document Number: 91000
1
相关型号：
V20E130L1A1X2855
RESISTOR, VOLTAGE DEPENDENT, 170V, 100J, THROUGH HOLE MOUNT, RADIAL LEADED
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明