VBUS05B1-SD0 [VISHAY]
Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode in Silicon Package;型号: | VBUS05B1-SD0 |
厂家: | VISHAY |
描述: | Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode in Silicon Package |
文件: | 总6页 (文件大小:97K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VBUS05B1-SD0
Vishay Semiconductors
www.vishay.com
Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line
ESD-Protection Diode in Silicon Package
FEATURES
• Ultra compact CLP0603 package
• Low package height < 0.3 mm
0.27
• 1-line ESD-protection
• Working range 5.5 V
• Low leakage current < 0.1 μA
• Ultra low load capacitance CD = 0.29 pF typ.
0.6
22543
0.3
22544
• ESD-protection acc. IEC 61000-4-2
16 kV contact discharge
16 kV air discharge
• Lead plating: Au (e4)
• Lead material: Ni
• Backside coating
MARKING (example only)
1
XY
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
22454
1 = year code
Open circle = month code and pin 1
XY = type code
ORDERING INFORMATION
TAPED UNITS PER REEL
MINIMUM ORDER QUANTITY
(8 mm TAPE ON 7" REEL)
DEVICE NAME
ORDERING CODE
VBUS05B1-SD0
VBUS05B1-SD0-G4-08
15 000
15 000
PACKAGE DATA
DEVICE NAME
PACKAGE NAME
TYPE CODE
WEIGHT
SOLDERING CONDITIONS
260 °C/10 s at terminals
Reflow soldering
VBUS05B1-SD0
CLP0603
5A
0.12 mg
according JEDEC® STD-020
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITIONS
SYMBOL
VALUE
UNIT
Peak pulse current
acc. IEC 61000-4-5, 8/20 μs/single shot
IPPM
2.5
A
Pin 1 to pin 2
acc. IEC 61000-4-5; tp = 8/20 μs; single shot
Peak pulse power
ESD immunity
PPP
45
W
Contact discharge acc. IEC 61000-4-2; 10 pulses
Air discharge acc. IEC 61000-4-2; 10 pulses
Junction temperature
16
16
VESD
kV
Operating temperature
Storage temperature
TJ
-55 to +150
-55 to +150
°C
°C
Tstg
Rev. 1.2, 28-Aug-15
Document Number: 85899
1
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VBUS05B1-SD0
Vishay Semiconductors
www.vishay.com
ESD-PROTECTION FOR HIGH-SPEED SIGNAL OR DATA LINES
The VBUS05B1-SD0 is a Bidirectional and Symmetrical (BiSy) ESD-protection device which clamps positive and negative
overvoltage transients to ground. Connected between the signal or data line and the ground the VBUS05B1-SD0 offers a high
isolation (low leakage current, low capacitance) within the specified working range. Due to the short leads and small package
size of the tiny CLP0603 package the line inductance is very low, so that fast transients like and ESD-strike can be clamped
with minimal over- or undershoots. Due to the very low capacitance the VBUS05B1-SD0 can be used for high speed data ports
like HDMI, USB 3.0 or Thunderbolt.
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITIONS/REMARKS
Number of lines which can be protected
Max. reverse working voltage
at IR = 0.1 μA
SYMBOL
Nchannel
VRWM
VR
MIN.
TYP.
-
MAX.
1
UNIT
lines
V
Protection paths
-
-
Reverse stand-off voltage
Reverse voltage
-
5.5
-
5.5
-
-
V
Reverse current
at VRWM = 5.5 V
IR
-
0.1
10
14
18
0.4
-
μA
V
Reverse breakdown voltage
at IR = 1 mA
VBR
6.0
-
8.5
12
15
0.29
0.29
at IPP = 1 A
VC
V
Reverse clamping voltage
Capacitance
at IPP = IPPM = 2.5 A
VC
-
V
at VR = 0 V; f = 1 MHz
CD
-
pF
pF
at VR = 3.3 V; f = 1 MHz
Transmission Line Pulse (TLP); tp = 100 ns
CD
-
-
20
-
I
TLP = 8 A
Transmission Line Pulse (TLP); tp = 100 ns
TLP = 16 A
Clamping voltage
VC-TLP
V
-
-
29
-
-
I
Dynamic resistance
Transmission Line Pulse (TLP); tp = 100 ns
RDYN
1.14
Rev. 1.2, 28-Aug-15
Document Number: 85899
2
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VBUS05B1-SD0
Vishay Semiconductors
www.vishay.com
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
18
16
14
12
10
8
120 %
100 %
80 %
Rise time = 0.7 ns to 1 ns
60 %
53 %
40 %
6
27 %
4
20 %
Measured acc. IEC 61000-4-5
(8/20 μs - wave form)
2
0 %
-10
0
0
1
2
3
4
0
10 20 30 40 50 60 70 80 90 100
Time (ns)
22750
IPP in A
20557
Fig. 1 - ESD Discharge Current Wave Form
Fig. 4 - Typical Peak Clamping Voltage VC vs.
Peak Pulse Current IPP
acc. IEC 61000-4-2 (330 /150 pF)
45
Transmission Line Pulse (TLP)
8 µs to 100 %
100 %
80 %
60 %
40 %
20 %
tp = 100 ns
40
35
30
25
20
15
10
5
(Average between 55 ns and 95 ns)
20 µs to 50 %
VC = 1.14 V/A x Ipp + 10 V
0 %
0
0
5
10
15
20
25
0
10
20
30
40
22755
IPP in A
20548
Time (µs)
Fig. 2 - 8/20 μs Peak Pulse Current Wave Form
acc. IEC 61000-4-5
Fig. 5 - Typical Peak Clamping Voltage VC vs.
Peak Pulse Current IPP
10
9
8
7
6
5
4
3
2
1
0
1E-09 1E-08 1E-07 1E-06 1E-05 1E-04 1E-03
22749
IR in µA
Fig. 3 - Typical Reverse Voltage VR vs. Reverse Current IR
Rev. 1.2, 28-Aug-15
Document Number: 85899
3
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VBUS05B1-SD0
Vishay Semiconductors
www.vishay.com
PACKAGE DIMENSIONS in millimeters (mils): CLP0603-2L
L
e1
Package = chip dimensions in mm
A1
e
Millimeters
nom.
mils
max.
nom.
max.
min.
0.24
min.
9.44
A
A1
b
0.27
0.30
0.02
0.28
0.33
0.63
10.63
11.81
0.79
0.22
0.27
0.57
0.25
0.30
0.60
0.40
0.25
0.15
8.66
9.84
11.02
12.99
24.80
D
E
10.62
22.44
11.81
23.62
15.75
9.84
e
e1
L
0.12
0.18
4.72
5.91
7.09
E
22740
2 terminal leadless package (CLP0603-2L LLP)
Document no.: S8-V-3906.04-023 (4)
Created - Date: 22. Nov. 2010
Rev.4 - Date: 07. May 2014
Footprint and soldering recommendation:
please see Application Note: www.vishay.com/doc?85917
Rev. 1.2, 28-Aug-15
Document Number: 85899
4
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VBUS05B1-SD0
Vishay Semiconductors
www.vishay.com
CARRIER TAPE in millimeters: CLP0603
2
0.05
A-A Section
0.2 0.02
Ø 1.55 0.05
4
0.1
A
Ø 0.2 0.05
B
B
0.33 0.03
A
B-B Section
0.37 0.03
Cummulative tolerances of 10 sprocket holes is +/-0.2mm
22591
Document no. S8-V-3906.04-0025 (4)
Created - Date: 22. Nov. 2010
ORIENTATION IN CARRIER CLP0603
Unreeling direction
DETAIL A
50:1
Pin 1
A
CLP0603
Top view
22607
Orientation in Carrier Tape (CLP0603)
S8-V-3906.04-026 (4)
22.10.2010
Rev. 1.2, 28-Aug-15
Document Number: 85899
5
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明