VJ0805A221KXRAT5Z [VISHAY]
CAP CER 220PF 1.5KV NP0 0805;
| 型号： | VJ0805A221KXRAT5Z |
| 厂家： | 
VISHAY |
| 描述： | CAP CER 220PF 1.5KV NP0 0805 |
| 文件： | 总9页 (文件大小：183K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
Prohibit Surface Arc-Over in High-Voltage Applications
FEATURES
For this Worldwide Patented Technology
• Specialty: high-voltage applications
• MLCC that protects against surface arc-over
• Excellent high-voltage performance
• Higher capacitances and smaller case sizes that
save board space, as compared to standard
high-voltage MLCCs
Available
• Voltage breakdowns as much as twice that of competitors’ products
• Available with polymer termination for increase resistance to
board flex cracking. Please contact factory for availability
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Power supplies
• DC/DC converters (buck and boost)
• Voltage multipliers for flyback converters
• For lighting and other AC applications please contact:
mlcc@vishay.com
ELECTRICAL SPECIFICATIONS
C0G (NP0)
X7R
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Note
Electrical characteristics at +25 °C unless otherwise specified
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 10 pF to 8.2 nF
Voltage Range: 1000 VDC to 2500 VDC
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 220 pF to 270 nF
Voltage Range: 250 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C 30 ppm/°C from -55 °C to +125 °C
Temperature Coefficient of Capacitance (TCC):
15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values 1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
250 VDC-rated:
200 % of rated voltage
500 VDC-rated:
630 VDC, 1000 VDC-rated: min. 120 % of rated voltage
min. 150 % of rated voltage
1000 VDC-rated:
1500 VDC, 2500 VDC-rated:
150 % of rated voltage
120 % of rated voltage
Revision: 25-May-2018
Document Number: 45197
1
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
CAPACITANCE
MAXIMUM
390 pF
1.5 nF
MAXIMUM VOLTAGE
(V)
DIELECTRIC
CASE
MINIMUM
10 pF
0805
1206
1210
2220
2225
0805
1206
1210
1808
1812
1500
1500
1500
1500
2500
1000
1000
1000
1000
1000
10 pF
C0G (NP0)
10 pF
2.7 nF
470 pF
470 pF
470 pF
220 pF
220 pF
220 pF
220 pF
5.6 nF
8.2 nF
3.3 nF
47 nF
X7R
82 nF
100 nF
270 nF
Note
Detail ratings see “Selection Chart”
•
ORDERING INFORMATION (4)
VJ0805
A
101
J
X
G
A
T
5Z (2)
CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION
DC
MARKING PACKAGING
PROCESS
CODE
(5)
CODE
NOMINAL
CODE
TOLERANCE
VOLTAGE
RATING (1)
0805
1206
1210
1808
1812
2220
2225
A = C0G
(NP0)
Y = X7R
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Examples
102 = 1000 pF
223 = 22 000 pF
J = 5 %
K = 10 %
M = 20 %
X = Ni barrier
100 % matte tin E = 500 V
plate finish
F, E = AgPd (3)
B = polymer
P = 250 V
A =
unmarked
5Z = HVArc
Guard®
L = 630 V
G = 1000 V
R = 1500 V
O = 2500 V
100 % matte tin
plate finish (4)
T = 7" reel / plastic tape
R = 11 1/4" / 13" reel / plastic tape
Notes
(1)
DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: mlcc@vishay.com
(2)
(3)
(4)
(5)
Process code has to be added
Termination code “E” is for conductive epoxy assembly, contact mlcc@vishay.com for availability
Please contact factory for polymer termination availability
Other termination options contact mlcc@vishay.com for availability
ENVIRONMENTAL STATUS
TERMINATION CODE
TERMINATION DESCRIPTION
Ni barrier 100 % tin plated matte finish
AgPd
RoHS COMPLIANT
VISHAY GREEN
X
E
B
F
Yes
Yes
Yes
Yes
Yes
Yes
No
Polymer layer, 100 % tin plated matte finish
AgPd
No
Revision: 25-May-2018
Document Number: 45197
2
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
TERMINATION PAD
(P)
MAXIMUM
THICKNESS
(T)
CASE
CODE
LENGTH
(L)
WIDTH
(W)
STYLE
MINIMUM
MAXIMUM
0.079 0.008
(2.00 0.20)
0.049 0.008
(1.25 0.20)
0805
1206
1210
1808
1812
2220
2225
VJ0805
VJ1206
VJ1210
VJ1808
VJ1812
VJ2220
VJ2225
0.057 (1.45)
0.067 (1.70)
0.067 (1.70)
0.067 (1.70)
0.086 (2.18)
0.086 (2.18)
0.090 (2.30)
0.010 (0.25)
0.030 (0.76)
0.126 0.008
(3.20 0.20)
0.063 0.008
(1.60 0.20)
0.010 (0.25)
0.010 (0.25)
0.010 (0.25)
0.010 (0.25)
0.010 (0.25)
0.010 (0.25)
0.030 (0.76)
0.030 (0.76)
0.035 (0.90)
0.035 (0.90)
0.037 (0.95)
0.037 (0.95)
0.126 0.008
(3.20 0.20)
0.098 0.008
(2.50 0.20)
0.180 0.012
(4.57 0.30)
0.080 0.010
(2.03 0.25)
0.177 0.012
(4.50 0.30)
0.126 0.008
(3.20 0.20)
0.220 0.010
(5.59 0.25)
0.200 0.010
(5.08 0.25)
0.220 0.010
(5.59 0.25)
0.250 0.010
(6.35 0.25)
Note
•
Polymer (B-termination) have increased dimensions:
part length increased by 0.006" (0.15 mm)
Revision: 25-May-2018
Document Number: 45197
3
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
SELECTION CHART C0G (NP0)
DIELECTRIC
C0G (NP0)
VJ1210 (1)
1210
1000
STYLE
VJ0805
0805
VJ1206 (1)
1206
VJ2220 (1)
2220
1000
VJ2225 (1)
2225
1500
R
CASE CODE
VOLTAGE (VDC
)
1000
G
1500
R
1000
1500
R
1500
R
1500
R
1000
G
2500
O
VOLTAGE CODE
CAP. CODE
100
G
G
G
CAP.
10 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
121
151
181
221
271
331
391
471
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
Notes
(1)
See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
•
Available in plastic carrier tape only
RoHS-compliant
Revision: 25-May-2018
Document Number: 45197
4
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
SELECTION CHART X7R
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC
X7R
VJ1210 (1)
1210
VJ0805
0805
VJ1206 (1)
1206
VJ1808 (1)
1808
VJ1812 (1)
1812
)
630 1000 250 500 630 1000 250 500 630 1000 250 500 630 1000 250 500 630 1000
VOLTAGE CODE
CAP.
L
G
P
E
L
G
P
E
L
G
P
E
L
G
P
E
L
G
CAP. CODE
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
12 nF
15 nF
18 nF
22 nF
27 nF
33 nF
39 nF
47 nF
56 nF
68 nF
82 nF
100 nF
120 nF
150 nF
180 nF
220 nF
270 nF
330 nF
Notes
(1)
See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
•
Available in plastic carrier tape only
RoHS-compliant
Revision: 25-May-2018
Document Number: 45197
5
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
HVArc Guard® C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
MINIMUM INSULATION RESISTANCE VS.TEMPERATURE
10 000
2.0
1.5
1.0
0.5
1000
100
10
0.0
-0.5
NP0
-1.0
-1.5
-2.0
-75 -50 -25
0
25
50 75 100 125
25
10
100 125
TEMPERATURE °C
TEMPERATURE °C
AGING RATE
VOLTAGE COEFFICIENT OF CAPACITANCE
0.2
0.1
0.2
0.1
0.0
0.0
-0.1
-0.1
-0.2
- 0.2
1
10
100
1000
10 000
0
10
20 30
40
50 60 70
80 90 100
HOURS
DC VOLTS APPLIED
IMPEDANCE VS. FREQUENCY OF 1206 NP0 HVArc Guard®
1000
100
470 pF
10
1000 pF
1
0.1
0.01
1
10
100
1000
FREQUENCY (MHz)
Revision: 25-May-2018
Document Number: 45197
6
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
HVArc Guard® X7R DIELECTRIC - TYPICAL PARAMETERS
MINIMUM INSULATION
RESISTANCE VS.TEMPERATURE
TEMPERATURE COEFFICIENT OF CAPACITANCE
15
10 000
10
5
1000
0
-5
100
-10
-15
-20
10
-100
-50
0
50
100
150
10
25
100 125
TEMPERATURE °C
TEMPERATURE °C
DISSIPATION FACTOR VS. TEMPERATURE
AGING RATE
3.0
2.5
2.0
1.5
1.0
0.5
0
1.0
0.0
-1.0
-2.0
-3.0
-4.0
-100
-50
0
50
100
150
1
10
100
1000
10 000
TEMPERATURE °C
HOURS
IMPEDANCE VS. FREQUENCY
OF 1206 HVArc Guard® CAPACITORS
100
10
1
33 nF
22 nF 15 nF
0.1
0.01
1
1000
10
100
FREQUENCY (MHz)
Revision: 25-May-2018
Document Number: 45197
7
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
TYPICAL C0G (NP0) VOLTAGE BREAKDOWN
TYPICAL X7R VOLTAGE BREAKDOWN
TYPICAL C0G (NP0) VOLTAGE BREAKDOWN
(n = 50, 500 V/s applied)
TYPICAL X7R VOLTAGE BREAKDOWN
(n = 50, 500 V/s applied)
3000
2900
2800
2700
2600
2500
2400
2300
2200
2100
2000
3500
3000
2500
2000
1500
1000
500
HVArc Guard®
HVArc Guard®
0
1000 V
1500 V
250 VDC
500 VDC
PART RATED VOLTAGE
1000 VDC
PART RATED VOLTAGE
TYPICAL
ARCING ON MLCCS (shown in polarized light)
Crack caused by surface arc from end termination to top electrode
layer cause component failure
Corona traces due to arc-over become conductive paths leading to
component failure
APPLICATION NOTE
• Suitable only for transient voltage and not for periodical pulse(s) chain
• 1000 V rated parts are not suitable for AC / lighting applications above 220 VAC
• 500 V and 630 V are not suitable for AC / lighting applications above 110 VAC
• If further questions, please contact: mlcc@vishay.com
STANDARD PACKAGING QUANTITIES (1)(2)(3)
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
CASE CODE
TAPE SIZE
PLASTIC TAPE PACKAGING CODE
“T”
PLASTIC TAPE PACKAGING CODE
“R”
0805
1206 (4)
1210 (4)
1808
8 mm
8 mm
3000
2500 / 3000
2500 / 3000
2000
10 000
10 000
10 000
10 000
4000
8 mm
12 mm
12 mm
12 mm
12 mm
1812
1000
2220
1000
n/a
2225
500
n/a
Notes
(1)
(2)
(3)
(4)
Vishay Vitramon uses embossed plastic carrier tape
11 1/4" reel is standard for large quantities. 13" is maybe used for large “T” dimension parts
Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
Packaging quantity can vary with product thickness
Contact mlcc@vishay.com with respect to specific part number requirements
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and 70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 25-May-2018
Document Number: 45197
8
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明