VLMW62CADB-3K8L [VISHAY]
Visible LED, SINGLE COLOR LED, WHITE, 2.1 mm, ROHS COMPLIANT, CERAMIC, SMD, LCC-6;型号: | VLMW62CADB-3K8L |
厂家: | VISHAY |
描述: | Visible LED, SINGLE COLOR LED, WHITE, 2.1 mm, ROHS COMPLIANT, CERAMIC, SMD, LCC-6 光电 |
文件: | 总10页 (文件大小:186K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VLMW62..
Vishay Semiconductors
Power SMD LED CLCC-6 Flat
FEATURES
• Utilizing InGaN technology
• Very low thermal resistance, high optical
power
e4
• Optical efficiency 30 lm/W
• Luminous intensity and color grouping
• Luminous intensity ratio per package unit
/I ≤ 1.6
I
Vmax Vmin
•
ESD-withstand voltage: up to 1 kV according to
JESD22-A114-B
20853
• Compatible with IR reflow solder processes
according to CECC 00802 and J-STD-020C
• Lead (Pb)-free device
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
• Preconditioning: acc. to JEDEC level 4
• Automotive qualified AEC-Q101
• Very flat package (0.9 mm)
DESCRIPTION
APPLICATIONS
The VLMW62.. is one of the most robust and light
efficient LEDs in the market. The small size and wide
viewing angle make these LEDs a prime choice for
backlighting applications and front panel indicators,
especially where space is at a premium. Its ceramic
package makes it the ideal light source in applications
of high thermal considerations allowing the additional
current drive for a maximum light output while
maintaining a high service life of up to 50K h. The
reflector inside this package is filled with a mixture of
silicone and TAG phosphor. The TAG phosphor
converts the blue emission partially to yellow, which
mixes with the remaining blue to white.
• Camera flash light
• Interior and exterior automotive lighting: brake
lights, turn lights, backlighting, side markers
• Indicator lighting
• Signal and symbol luminaire
• Marker lights
• Dashboard illumination
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: SMD CLCC-6 flat
• Product series: power
• Angle of half intensity: 60°
PARTS TABLE
COLOR, LUMINOUS INTENSITY
LUMINOUS FLUX (TYP)
PART
TECHNOLOGY
(at IF = 140 mA)
White, IV = (2800 to 7100) mcd
White, IV = (3550 to 9000) mcd
VLMW62CADB-3K8L
VLMW62CBEA-3K8L
1200 mlm
1700 mlm
InGaN/TAG
InGaN/TAG
Document Number 81752
Rev. 1.1, 15-Oct-07
www.vishay.com
1
VLMW62..
Vishay Semiconductors
1)
ABSOLUTE MAXIMUM RATINGS VLMW62..
PARAMETER
TEST CONDITION
SYMBOL
VALUE
150
UNIT
mA
IF
Forward current
Power dissipation
Junction temperature
Ptot
Tj
650
mW
°C
+ 125
Surge current
t < 10 µs, d = 0.1
IFM
1000
mA
Tamb
Tstg
Operating temperature range
Storage temperature range
- 40 to + 100
°C
°C
- 40 to + 100
RthJP
RthJA
Thermal resistance junction/pin
Thermal resistance junction/ambient
40
90
K/W
K/W
Metal core pcb 960 mm² per LED
Note:
Not designed for reverse operation
1)
T
= 25 °C, unless otherwise specified
amb
1)
OPTICAL AND ELECTRICAL CHARACTERISTICS VLMW62.., WHITE
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN
2800
3550
8800
11100
TYP.
MAX
7100
UNIT
mcd
mcd
mlm
mlm
IV
VLMW62CADB
VLMW62CBEA
VLMW62CADB
VLMW62CBEA
IF = 140 mA
Luminous intensity
IV
φV
φV
9000
1200
1700
22300
28300
IF = 140 mA
Luminous flux
Chromaticity coordinate x acc. to
CIE 1931
IF = 140 mA
IF = 140 mA
x
y
0.33
0.33
Chromaticity coordinate y acc. to
CIE 1931
IF = 140 mA
IF = 140 mA
IF = 140 mA
IF = 140 mA
Angle of half intensity
ϕ
60
3.3
deg
V
VF
Forward voltage
2.9
4.3
Temperature coefficient of VF
Temperature coefficient of IV
TCVF
TCIV
- 3
mV/K
%/K
- 0.4
Note:
Not designed for reverse operation
1)
Tamb = 25 °C, unless otherwise specified
LUMINOUS INTENSITY/FLUX CLASSIFICATION WHITE
GROUP
LUMINOUS INTENSITY IV (MCD)
STANDARD
MIN
2800
3550
4500
5600
7100
MAX
CA
CB
DA
DB
EA
3550
4500
5600
7100
9000
Note:
Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %.
The above type Numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel
(there will be no mixing of two groups on each reel).
In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where wavelength groups are measured and binned, each single wavelength group is packed in a single reel.
In order to ensure availability, single wavelength groups can not be ordered.
www.vishay.com
2
Document Number 81752
Rev. 1.1, 15-Oct-07
VLMW62..
Vishay Semiconductors
FORWARD VOLTAGE CLASSIFICATION
FORWARD VOLTAGE (V)
GROUP
MIN.
2.9
MAX.
3.5
3
4
3.5
4.3
Note:
Forward voltages are tested at a current pulse duration of 25 ms and a tolerance of 0.1 V.
In order to ensure availability, a single forward voltage group can not be ordered.
CHROMATICITY COORDINATED GROUPS FOR WHITE SMD LED
X
Y
X
Y
0.266
0.258
0.273
0.280
0.273
0.266
0.280
0.286
0.280
0.273
0.285
0.291
0.286
0.280
0.291
0.296
0.291
0.285
0.307
0.310
0.296
0.291
0.310
0.313
0.232
0.239
0.261
0.252
0.227
0.232
0.252
0.244
0.252
0.261
0.279
0.268
0.244
0.252
0.268
0.259
0.268
0.279
0.312
0.297
0.259
0.268
0.297
0.284
0.310
0.307
0.330
0.330
0.313
0.310
0.330
0.330
0.330
0.330
0.347
0.345
0.330
0.330
0.338
0.352
0.345
0.347
0.367
0.364
0.352
0.338
0.364
0.360
0.297
0.312
0.347
0.330
0.284
0.297
0.330
0.310
0.330
0.347
0.371
0.352
0.310
0.330
0.342
0.344
0.352
0.371
0.401
0.380
0.344
0.342
0.380
0.357
3L
3K
4L
4K
5L
5K
6L
6K
7L
7K
8L
8K
Note:
Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of 0.01.
Document Number 81752
Rev. 1.1, 15-Oct-07
www.vishay.com
3
VLMW62..
Vishay Semiconductors
TYPICAL CHARACTERISTICS
T
= 25 °C, unless otherwise specified
amb
165
0.400
0.350
0.300
0.250
0.200
150
135
120
105
90
New color grouping white
8L
8K
7L
7K
6L
6K
75
5L
5K
60
4L
4K
45
3L
3K
30
15
0
0.250 0.270 0.290 0.310 0.330 0.350 0.370
0
20
40
60
80
100 120
19784
X-par
20669
Tamb - Ambient Temperature (°C)
Figure 1. Forward Current vs. Ambient Temperature
Figure 4. Coordinates of Colorgroups
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
100
90
80
70
60
50
40
30
20
10
0
400 450 500 550 600 650 700 750 800
- 60 - 40 - 20
0
20 40 60 80 100
20647
16196
λ - Wavelength (nm)
Tamb - Ambient Temperature (°C)
Figure 2. Relative Intensity vs. Wavelength
Figure 5. Relative Luminous Flux vs. Ambient Temperature
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
1000
100
10
1
3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0
0
40
IF - Forward Current (mA)
Figure 3. Relative Luminous Intensity vs. Forward Current
80
120 160 200 240
20717
20645
VF - Forward Voltage (V)
Figure 6. Forward Current vs. Forward Voltage
www.vishay.com
4
Document Number 81752
Rev. 1.1, 15-Oct-07
VLMW62..
Vishay Semiconductors
0.50
0.40
0.30
0.20
0.10
0
- 0.10
- 0.20
- 0.30
- 0.40
- 60 - 40 - 20
0
20 40 60 80 100
20649
Tamb - Ambient Temperature (°C)
Figure 7. Forward Voltage vs. Ambient Temperature
0.050
0.040
Y
X
0.030
0.020
0.010
0
- 0.010
- 0.020
- 0.030
- 0.040
- 0.050
- 60 - 40 - 20
0
20 40 60 80 100
20648
Tamb - Ambient Temperature (°C)
Figure 8. Color Coordinate vs. Ambient Temperature
0.310
0.305
0.300
X
0.295
0.290
0.285
0.280
Y
0.275
0.270
0
40
IF - Forward Current (mA)
Figure 9. X, Y Coordinate vs. Forward Current
80
120 160 200 240
20644
Document Number 81752
Rev. 1.1, 15-Oct-07
www.vishay.com
5
VLMW62..
Vishay Semiconductors
TAPING DIMENSIONS in millimeters
20869
www.vishay.com
6
Document Number 81752
Rev. 1.1, 15-Oct-07
VLMW62..
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
20833
SOLDERING PADS DIMENSIONS in millimeters
SOLDERING PROFILE
IR Reflow Soldering Profile for Lead (Pb)-free Soldering
Preconditioning acc. to JEDEC level 4
300
250
200
150
100
50
max. 260 °C
255 °C
245 °C
240 °C
217 °C
max. 30 s
max. 100 s
max. 120 s
max. ramp down 6 °C/s
max. ramp up 3 °C/s
0
0
50
100
150
200
250
300
Time (s)
max. 2 cycles allowed
20619
20598
Figure 10. Vishay Lead (Pb)-free Reflow Soldering Profile
(acc. to J-STD-020C)
Document Number 81752
Rev. 1.1, 15-Oct-07
www.vishay.com
7
VLMW62..
Vishay Semiconductors
BAR CODE PRODUCT LABEL
EXAMPLE:
RECOMMENDED METHOD OF STORAGE
Dry box storage is recommended as soon as the
aluminum bag has been opened to prevent moisture
absorption. The following conditions should be
observed, if dry boxes are not available:
A
• Storage temperature 10 °C to 30 °C
• Storage humidity ≤ 60 % RH max.
After more than 72 h under these conditions moisture
content will be too high for reflow soldering.
In case of moisture absorption, the devices will recover
to the former condition by drying under the following
condition:
D
E
192 h at 40 °C + 5 °C/- 0 °C and < 5 % RH
(dry air/nitrogen) or
20613
C
B
96 h at 60 °C + 5 °C and < 5 % RH for all device
containers or
24 h at 100 °C + 5 °C not suitable for reel or tubes.
An EIA JEDEC standard JESD22-A112 level 4 label is
included on all aluminum dry bags.
A) Type of component
B) Manufacturing plant
C) SEL - selection code (bin):
e.g.: DA = code for luminous intensity group
5
4
= code for color group
= code for forward voltage
LEVEL
CAUTION
This bag contains
D) Batch:
MOISTURE-SENSITIVE DEVICES
4
200707 = year 2007, week 07
PH19 = plant code
1. Shelf life in sealed bag: 12 months at < 40 °C and < 90 % relative
humidity (RH)
E) Total quantity
2. After this bag is opened, devices that will be subjected to soldering
reflow or equivalent processing (peak package body temp. 260 °C)
must be
2a. Mounted within 72 hours at factory condition of < 30 °C/60 % RH or
2b. Stored at < 5 % RH
DRY PACKING
3. Devices require baking befor mounting if:
Humidity Indicator Card is > 10 % when read at 23 °C 5 °C or
2a. or 2b. are not met.
The reel is packed in an anti-humidity bag to protect
the devices from absorbing moisture during
transportation and storage.
4. If baking is required, devices may be baked for:
192 hours at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or
96 hours at 60 °C 5 °C and < 5 % RH for all device containers or
24 hours at 125 °C 5 °C not suitable for reels or tubes
Bag Seal Date:
(If blank, see barcode label)
Note: Level and body temperature defined by EIA JEDEC Standard JSTD-020
Example of JESD22-A112 level 4 label
Aluminum bag
ESD PRECAUTION
Label
Proper storage and handling procedures should be
followed to prevent ESD damage to the devices
especially when they are removed from the antistatic
shielding bag. Electro-static sensitive devices warning
labels are on the packaging.
Reel
15973
VISHAY SEMICONDUCTORS STANDARD
BAR CODE LABELS
The Vishay Semiconductors standard bar code labels
are printed at final packing areas. The labels are on
each packing unit and contain Vishay Semiconductors
specific data.
FINAL PACKING
The sealed reel is packed into a cardboard box. A
secondary cardboard box is used for shipping
purposes.
www.vishay.com
8
Document Number 81752
Rev. 1.1, 15-Oct-07
VLMW62..
Vishay Semiconductors
OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating
systems with respect to their impact on the health and safety of our employees and the public, as well as their
impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as
ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and
forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban
on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of
ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
The IEC/EN standards require that the desired classification Accessible Emission Limit shall not be exceeded
in “Normal” and “Single Fault Conditions”. This product is in Compliance with the requirement in
CEN/IEC/EN60825-1 to ensure that required classifications are not exceeded in single fault conditions.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each customer
application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or
unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and
expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such
unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Document Number 81752
Rev. 1.1, 15-Oct-07
www.vishay.com
9
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
相关型号:
VLMW62CBEA-3K8L
Visible LED, SINGLE COLOR LED, WHITE, 2.1 mm, ROHS COMPLIANT, CERAMIC, SMD, LCC-6
VISHAY
VLMW711AD-GS08
Visible LED, SINGLE COLOR LED, WHITE, 6 mm, 6 X 6 MM, 1.50 MM HEIGHT, LEAD FREE, SMD, 4 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明