VO610A-1X019T [VISHAY]
VO610A Optocoupler, Phototransistor Output, High Temperature, 110 °C Rated;
| 型号： | VO610A-1X019T |
| 厂家： | 
VISHAY |
| 描述： | VO610A Optocoupler, Phototransistor Output, High Temperature, 110 °C Rated 输出元件 光电 |
| 文件： | 总8页 (文件大小：186K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
VO610A
Vishay Semiconductors
www.vishay.com
Optocoupler, Low Input Current, Phototransistor Output
FEATURES
• Temperature range - 55 °C to + 110 °C
• Rated impulse voltage (transient overvoltage)
VIOTM = 6 kVpeak
• Isolation test voltage (partial discharge test
voltage) Vpd = 1.6 kV
• Rated isolation voltage (RMS includes DC)
A
1
2
4
3
E
C
C
VIOWM = 600 VRMS
• Rated recurring peak voltage (repetitive) VIORM = 850 Vpeak
• Thickness through insulation 0.4 mm
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
17918_10
Circuits for safe protective separation against electrical
shock according to safety class II (reinforced isolation):
• for appl. class I - IV at mains voltage 300 V
• for appl. class I - IV at mains voltage 600 V according to
table 1 of IEC 60664-1, suitable for:
- Switch-mode power supplies
- Line receiver
DESCRIPTION
The VO610A consists of a phototransistor optically coupled
to a gallium arsenide infrared-emitting diode in a 4 pin
plastic dual inline package.
AGENCY APPROVALS
- Computer peripheral interface
- Microprocessor system interface
(All parts are certified under base model VO610A)
• BSI: EN 60065:2002, EN 60950:2000
• DIN EN 60747-5-5, available with option 1
• FIMKO EN 60065, EN 60335-1, EN 60950-1
• UL file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• CQC GB4943.1-2011, GB8898-2011
ORDERING INFORMATION
DIP-#
V
O
6
1
0
A
-
#
X
0
#
#
T
7.62 mm
Option 6
PART NUMBER
CTR
BIN
PACKAGE OPTION
TAPE
AND
Option 7
REEL
10.16 mm
Option 8
> 0.6 mm
Option 9
9.27 mm
> 8 mm
AGENCY CERTIFIED/PACKAGE
BSI, FIMKO, UL, cUL
DIP-4
CTR (%)
40 to 80
63 to 125
100 to 200
160 to 320
VO610A-1
VO610A-2
VO610A-3
-
-
SMD-4, option 7
SMD-4, option 8
SMD-4, option 9
VDE, BSI, FIMKO, UL, cUL
DIP-4
-
-
VO610A-3X007T
VO610A-3X008T
VO610A-3X009T
100 to 200
VO610A-3X001
VO610A-3X016
-
-
-
VO610A-4X008T
-
-
-
40 to 80
63 to 125
160 to 320
-
-
-
-
-
-
-
DIP-4, 400 mil, option 6
SMD-4, option 7
SMD-4, option 8
SMD-4, option 9
-
-
-
VO610A-4X017T
-
-
VO610A-3X018T
VO610A-3X019T
VO610A-1X019T
VO610A-4X019T
Note
Additional options may be possible, please contact sales office
•
Rev. 1.7, 18-Feb-13
Document Number: 81775
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO610A
Vishay Semiconductors
www.vishay.com
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
VR
IF
6
V
mA
A
Forward current
60
Forward surge current
LED power dissipation
OUTPUT
tp 10 μs
IFSM
Pdiss
1.5
100
at 25 °C
mW
Collector emitter voltage
Emitter collector voltage
Collector current
VCEO
VECO
IC
70
7
V
V
50
mA
mA
mW
Collector peak current
Output power dissipation
COUPLER
tp/T = 0.5, tp 10 ms
ICM
100
150
at 25 °C
Pdiss
Isolation test voltage (RMS)
Operating ambient temperature range
Storage temperature range
Soldering temperature (1)
t = 1 min
VISO
Tamb
Tstg
5000
- 55 to + 110
- 55 to + 125
260
VRMS
°C
°C
2 mm from case, 10 s
Tsld
°C
Notes
•
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
Refer to reflow profile for soldering conditions for surface mounted parts (SMD), and wave profile for soldering conditions for through hole
parts (DIP), please go to “Assembly Instructions” (www.vishay.com/doc?80054).
(1)
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
1.25
50
MAX.
UNIT
INPUT
Forward voltage
IF = 50 mA
VF
IR
1.6
V
Reverse current
V
R = 6 V
100
μA
pF
Junction capacitance
OUTPUT
V
R = 0, f = 1 MHz
Cj
Collector emitter voltage
Emitter collector voltage
Collector emitter cut-off current
COUPLER
I
C = 1 mA
IE = 100 μA
CE = 20 V, IF = 0 A
VCEO
VECO
ICEO
70
7
V
V
V
10
100
0.3
nA
Collector emitter saturation voltage
IF = 10 mA, IC = 1 mA
VCEsat
fc
V
V
CE = 5 V, IF = 10 mA,
Cut-off frequency
110
0.6
kHz
pF
RL = 100
Coupling capacitance
f = 1 MHz
Ck
Note
•
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Rev. 1.7, 18-Feb-13
Document Number: 81775
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO610A
Vishay Semiconductors
www.vishay.com
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
13
TYP.
30
MAX.
UNIT
%
VO610A-1
VO610A-2
VO610A-3
VO610A-4
VO610A-1
VO610A-2
VO610A-3
VO610A-4
CTR
CTR
22
45
%
VCE = 5 V, IF = 1 mA
CTR
34
70
%
CTR
56
90
%
IC/IF
CTR
40
80
%
CTR
63
125
200
320
%
VCE = 5 V, IF = 10 mA
CTR
100
160
%
CTR
%
SAFETY AND INSULATION RATED PARAMETERS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Partial discharge test voltage -
routine test
100 %, ttest = 1 s
Vpd
1.6
kV
Partial discharge test voltage -
lot test (sample test)
t
Tr = 60 s, ttest = 10 s,
(see figure 2)
Vpd
1.3
kV
VIO = 500 V
RIO
RIO
1012
1011
V
IO = 500 V, Tamb = 100 °C
Insulation resistance
V
IO = 500 V, Tamb = 150 °C
(construction test only)
RIO
109
Rated impulse voltage
Max. working voltages
Forward current
VIOTM
VIORM
ISI
6
kV
Vpeak
mA
Recurring peak voltage
850
130
265
150
Power dissipation
Safety temperature
Creepage distance
PSO
Tsi
mW
°C
7.6
mm
Note
•
According to DIN EN 60747-5-5 (VDE 0884), § 7.4.3.8.2 (see figure 2). This optocoupler is suitable for safe electrical isolation only within the
safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits.
VIOTM
300
t1, t2 = 1 s to 10 s
Phototransistor
Pso (mW)
t3, t4 = 1 s
ttest = 10 s
tstres = 12 s
250
200
150
100
50
Vpd
VIOWM
VIORM
IR-diode
(mA)
I
si
0
t3 ttest t4
t2 tstres
t
0
0
25
50
75
100 125 150
t1
tTr = 60 s
13930
94 9182-2
Tsi - Safety Temperature (°C)
Fig. 1 - Derating Diagram
Fig. 2 - Test Pulse Diagram for Sample Test according to
DIN EN 60747-5-5 (VDE0884), IEC 60747
Rev. 1.7, 18-Feb-13
Document Number: 81775
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO610A
Vishay Semiconductors
www.vishay.com
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
VS = 5 V, IC = 2 mA, RL = 100 ,
Delay time
td
3
μs
(see figure 3)
VS = 5 V, IC = 2 mA, RL = 100 ,
Rise time
tr
3
4.7
0.3
6
μs
μs
μs
μs
μs
μs
μs
(see figure 3)
VS = 5 V, IC = 2 mA, RL = 100 ,
Fall time
tf
(see figure 3)
VS = 5 V, IC = 2 mA, RL = 100 ,
Storage time
Turn-on time
Turn-off time
Turn-on time
Turn-off time
ts
(see figure 3)
VS = 5 V, IC = 2 mA, RL = 100 ,
ton
toff
ton
toff
(see figure 3)
VS = 5 V, IC = 2 mA, RL = 100 ,
5
(see figure 3)
VS = 5 V, IF = 10 mA, RL = 1 k,
9
(see figure 4)
VS = 5 V, IF = 10 mA, RL = 1 k,
10
(see figure 4)
IF
0
+ 5 V
I
I
F
t p
F
t
IC
0
I
= 2 mA; adjusted through
input amplitude
C
100 %
90 %
R
= 50 Ω
= 0.01
G
t
p
T
10 %
t
= 50 µs
p
0
Channel I
Channel II
tr
Oscilloscope
t
td
tf
toff
R
C
= 1 MΩ
= 20 pF
ts
L
L
ton
50 Ω
100 Ω
tp
td
tr
Pulse duration
Delay time
Rise time
t
t
Storage time
Fall time
Turn-off time
s
f
toff (= ts + tf)
t
on (= td + tr)
Turn-on time
95 10804
96 11698
Fig. 3 - Test Circuit, Non-Saturated Operation
Fig. 5 - Switching Times
+ 5 V
IC
IF
IF = 10 mA
0
RG = 50 Ω
tp
= 0.01
T
tp = 50 µs
Channel I
Channel II
Oscilloscope
RL 1 MΩ
≥
≤
CL
20 pF
50 Ω
1 kΩ
95 10843
Fig. 4 - Test Circuit, Saturated Operation
Rev. 1.7, 18-Feb-13
Document Number: 81775
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO610A
Vishay Semiconductors
www.vishay.com
PACKAGE DIMENSIONS in millimeters
6.5 0.3
Pin 1 identifier
7.62 to 9.5
7.62 typ.
4.58 0.3
0.4 0.1
3.5 0.3
4.5 0.3
2.8 0.5
0° to 15°
1.3 0.1
0.5 0.1
0.25 typ.
2.54 typ.
i178027-11
Option 7
Option 8
Option 9
Option 6
10.3 max.
7.62 typ.
7.62 typ.
7.62 typ.
7.62 typ.
0.6 min.
0.25 0.1
0.1 0.1
0.6 min.
3.6 0.3
3.5 0.3
3.5 0.3
0.1 min.
4.3 0.3
0.6 min.
9.27 min.
12.1 max.
8 min.
2.7 min.
10.3 max.
8 min.
10.16 typ.
R 0.25
R 0.25
R 0.25
20802-38
8 min.
11.05
9.95 min.
13.0
7.7
1.52
1.52
1.52
11.05
PACKAGE MARKING (Example of VO617A-3X018T)
VO610A-3
V YWW 24
Note
•
•
•
Only options 1, 7, and 8 are reflected in the package marking.
The VDE logo is only printed on option 1 parts.
Tape and reel suffix (T) is not part of the package marking.
Rev. 1.7, 18-Feb-13
Document Number: 81775
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO610A
Vishay Semiconductors
www.vishay.com
PACKING INFORMATION
DEVICE PER TUBE
TYPE
UNITS/TUBE
TUBES/BOX
UNITS/BOX
DIP-4, standard and option 6
100
40
4000
Top cover tape
carrier
Embossed
Embossment
17998
Fig. 6 - Tape and Reel Shipping Medium
10 pitch cumulative
tolerance on tape
0.2
2
0.1
1.55 + 0.1
4
0.1
0.35 0.1
1.75 0.1
7.5 0.1
16 0.3
4.65 0.1
5° max.
5° max.
X
X
1.5 0.1
12 0.1
4.55 0.1
10.3 0.1
Section X-X
Fig. 7 - Tape and Reel Packing for Option 7 and Option 9
(1000 units per reel)
Rev. 1.7, 18-Feb-13
Document Number: 81775
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO610A
Vishay Semiconductors
www.vishay.com
1.5 0.1
4
0.1
2
0.1
1.75 0.1
0.35 0.1
11.5 0.1
24 0.3
12.5 0.1
X
X
5° max.
5° max.
8
0.1
1.5 0.1
3.9 0.1
4.65 0.1
R0.76
Section X-X
Fig. 8 - Tape and Reel Packing for Option 8
(2000 units per reel)
Rev. 1.7, 18-Feb-13
Document Number: 81775
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号：
VO610A-2X007T
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, ROHS COMPLIANT, SMD, 4 PIN
VISHAY
VO610A-3X006
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, 0.400 INCH, ROHS COMPLIANT, PLASTIC, DIP-4
VISHAY
VO610A-3X009T
VO610A Optocoupler, Phototransistor Output, High Temperature, 110 °C Rated
VISHAY
VO610A-3X019T
VO610A Optocoupler, Phototransistor Output, High Temperature, 110 °C Rated
VISHAY
VO610A-4
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, ROHS COMPLIANT, PLASTIC, DIP-4
VISHAY
©2020 ICPDF网 联系我们和版权申明