VR68000001003JAC00 概述
RES 100K OHM 1W 5% AXIAL 电阻
VR68000001003JAC00 数据手册
通过下载VR68000001003JAC00数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载VR25, VR37, VR68
Vishay BCcomponents
www.vishay.com
High Ohmic / High Voltage Metal Glaze Leaded Resistors
FEATURES
• UL Approved (UL1676, file no: E171160)
• Meet the safety requirements of:
- IEC 60065
- DIN EN 60065
- VDE 0860
- CQC (China)
• AEC-Q200 qualified (VR25, VR37)
• High pulse loading capability (maximum 10 kV)
• Radial version available for VR25
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
click logo to get started
DESIGN SUPPORT TOOLS
APPLICATIONS
Models
Available
• Where high resistance, high stability, and high reliability at
high voltage are required
A metal glazed film is deposited on a high grade ceramic
body. After a helical groove has been cut in the resistive
layer, tinned electrolytic copper wires are welded to the
end-caps. The resistors are coated with a light blue lacquer
which provides electrical, mechanical, and climatic
protection.
• High humidity environment
• White goods
• Power supplies
• Automotive electronics
TECHNICAL SPECIFICATIONS
DESCRIPTION
VR25
0207
VR37
VR68
0718
Imperial size
0309
Resistance range (1)
100 k to 22 M
100 k to 33 M
10 %; 5 %; 1 %
100 k to 68 M
Resistance tolerance
Temperature coefficient
Rated dissipation, P70
Operating voltage, Umax. AC/DC
Operating temperature range
Peak permissible film temperature
Thermal resistance (Rth)
Insulation voltage:
200 ppm/K
0.5 W
0.25 W
1600 V
1.0 W
3500 V
10 000 V
-55 °C to +155 °C
155 °C
140 K/W
120 K/W
70 K/W
1 min.; Uins
700 V
Maximum noise (white noise)
5 μV/V
1.5 %
2.5 μV/V
2.5 μV/V
1.5 %
Max. resistance change at
rated dissipation for resistance range,
|R/R| max., after 1000 h
1.5 %
Note
(1)
Ohmic values (other than resistance range) are available on request
SAFETY REQUIREMENTS AND QUALIFICATIONS
DESCRIPTION
VR25, VR37
VR37
VR68
UL1676 qualification (file no: E171160)
for ohmic range 510 k to 11 M;
DIN EN 60065 (VDE 0860): 2015; clause 14.2 a);
EN 60065: 2014
Safety requirements / qualifications
AEC-Q200
IEC 60065: clause 14.2 a)
CQC
Revision: 21-Sep-2018
Document Number: 28907
1
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VR25, VR37, VR68
Vishay BCcomponents
www.vishay.com
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE
TCR
TOLERANCE
RESISTANCE
E-SERIES
E24; E96
E24; E96
E24
1 %
100 k to 15 M
100 k to 22 M
15 M to 22 M
100 k to 33 M
100 k to 33 M
100 k to 68 M
100 k to 68 M
VR25
5 %
10 %
1 %
200 ppm/K
E24; E96
E24
VR37
VR68
5 %
1 %
E24; E96
E24
5 %
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: VR25000001003FA100
V
R
2
5
0
0
0
0
0
1
0
0
3
F
A
1
0
0
TYPE / SIZE
VARIANT
TCR
0 = standard
RESISTANCE
TOLERANCE (1)
PACKAGING
SPECIAL
VR25000 = VR25
VR37000 = VR37
VR68000 = VR68
0 = neutral
3 digit value
F = 1 %
J = 5 %
K = 10 %
A1
AC
A5
RD
R5
N4
00 = standard
1 digit multiplier
MULTIPLIER
0 = *100
1 = *101
2 = *102
3 = *103
4 = *104
5 = *105
6 = *106
PRODUCT DESCRIPTION: VR25 1 % A1 100K
VR25
1 %
A1
100K
TYPE / SIZE
TOLERANCE
PACKAGING
RESISTANCE
VR25
VR37
VR68
1 %
5 %
10 %
A1
AC
A5
RD
R5
N4
100K = 100 k
15M = 15 M
Note
(1)
See table “Temperature Coefficient and Resistance Range” for selecting correct ohmic value - tolerance combination
PACKAGING
TYPE
CODE QUANTITY
PACKAGING STYLE
WIDTH PITCH
DIMENSIONS
A1
A5
N4
R5
A1
R5
AC
RD
1000
5000
4000
5000
1000
5000
500
53 mm
53 mm
-
5 mm
5 mm
75 mm x 31 mm x 260 mm
76 mm x 105 mm x 265 mm
Taped according to IEC 60286-1 fan-folded in a box
VR25
Taped according to IEC 60286-2 fan-folded in a box
Taped according to IEC 60286-1 on a reel
12.7 mm 48 mm x 253 mm x 330 mm
53 mm
5 mm
5 mm
5 mm
10 mm
93 mm x 300 mm x 298 mm
72 mm x 60 mm x 258 mm
90 mm x 375 mm x 375 mm
82 mm x 111 mm x 256 mm
Taped according to IEC 60286-1 fan-folded in a box 53 mm
Taped according to IEC 60286-1 on a reel 53 mm
Taped according to IEC 60286-1 fan-folded in a box 66 mm
VR37
VR68
750
Taped according to IEC 60286-1 on a reel
66 mm
10 mm 105 mm x 315 mm x 305 mm
Revision: 21-Sep-2018
Document Number: 28907
2
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VR25, VR37, VR68
Vishay BCcomponents
www.vishay.com
Hence the products fully comply with the following
directives:
DESCRIPTION
Production is strictly controlled and follows an extensive
set of instructions established for reproducibility.
• 2000/53/EC End-of-Life Vehicle Directive (ELV) and
Annex II (ELV II)
A
homogeneous film of metal alloy is deposited on a high
grade ceramic body and conditioned to achieve the desired
temperature coefficient. Plated steel termination caps are
firmly pressed on the metalized rods. Mostly, a special laser
is used to achieve the target value by smoothly cutting a
helical groove in the resistive layer without damaging the
ceramics. Connecting wires of electrolytic copper plated
with 100 % pure tin are welded to the termination caps.
The resistor elements are covered by a light blue
protective coating designed for electrical, mechanical, and
climatic protection. Four or five color code rings designate
the resistance value and tolerance in accordance with
IEC 60062.
• 2011/65/EU Restriction of the Use of Hazardous
Substances
Directive
(RoHS)
with
amendment
2015/863/EU
• 2012/19/EU Waste Electrical and Electronic Equipment
Directive (WEEE)
Vishay pursues the elimination of conflict minerals from its
supply chain, see the Conflict Minerals Policy at
www.vishay.com/doc?49037.
ASSEMBLY
The resistors are suitable for processing on automatic
insertion equipment and cutting and bending machines.
Excellent solderability is proven, even after extended
storage. They are suitable for automatic soldering using
wave or dipping.
Yellow and gray are used instead of gold and silver because
metal particles in the lacquer could affect high-voltage
properties.
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. Only accepted products are stuck
directly on the adhesive tapes in accordance with
IEC 60286-1 or for the radial versions in accordance to
IEC 60286-2.
The resistors are completely lead (Pb)-free, the pure tin
plating provides compatibility with lead (Pb)-free and
lead-containing soldering processes. The immunity of the
plating against tin whisker growth, in compliance with
IEC 60068-2-82, has been proven under extensive testing.
The encapsulant is resistant to cleaning solvent specified in
IEC 60115-1. The suitability of conformal coatings, if
applied, shall be qualified by appropriate means to ensure
the long-term stability of the whole system.
MATERIALS
Vishay acknowledges the following systems for the
regulation of hazardous substances:
• IEC 62474, Material Declaration for Products of and for the
Electrotechnical Industry, with the list of declarable
substances given therein (1)
APPROVALS
These resistors meet the safety requirements of:
• UL1676 (510 k to 11 M); file no: E171160
• IEC 60065, clause 14.2 a)
• DIN EN 60065, clause 14.2 a)
• VDE 0860, clause 14.2 a)
• The Global Automotive Declarable Substance List
(GADSL) (2)
• The REACH regulation (1907/2006/EC) and the related list
(3)
of substances with very high concern (SVHC)
supply chain
for its
• CQC, China
The products do not contain any of the banned substances
as per IEC 62474, GADSL, or the SVHC list, see
www.vishay.com/how/leadfree.
RELATED PRODUCTS
For a correlated range of Metal Film Resistors see the
datasheet:
“High Ohmic / High Voltage Metal Film Leaded Resistors”,
www.vishay.com/doc?30260
For product that offers high power dissipation and metal
oxide film technology see the datasheet:
“High Power Metal Oxide Leaded Resistors”,
www.vishay.com/doc?20128
Notes
(1)
The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474
The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council, and available at
www.gadsl.org
(2)
(3)
The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table
Revision: 21-Sep-2018
Document Number: 28907
3
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VR25, VR37, VR68
Vishay BCcomponents
www.vishay.com
FUNCTIONAL PERFORMANCE
Derating
100
80
60
40
20
0
-55
0
50
100
125
155
70
Ambient Temperature in °C
Hot-Spot Temperature Rise (T) as a Function of Dissipated Power
35
ΔT
60
50
40
30
20
10
0
ΔT
(K)
(K)
30
25
20
15
10
5
0
0
0.05
0.10
VR25
0.15
0.20
0.25
0
0.1
0.2
VR37
0.3
0.4
0.5
P (W)
P (W)
70
60
50
40
30
20
10
0
ΔT
(K)
0
0.2
0.4
VR68
0.6
0.8
1.0
P (W)
Revision: 21-Sep-2018
Document Number: 28907
4
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VR25, VR37, VR68
Vishay BCcomponents
www.vishay.com
Maximum allowed peak pulse voltage in accordance with IEC 60065, 14.2 a);
50 discharges from a 1nF capacitor charged to Ûmax.; 12 discharges/min (drift R/R 2 %)
8
Ûmax.
(kV)
7
6
5
4
10-2
10-1
10-1
10-1
1
10
10
10
102
102
102
R
n (MΩ)
VR25
11
Ûmax.
(kV)
10
9
8
7
6
5
4
10-2
1
R
n (MΩ)
VR37
11
10
9
Ûmax.
(kV)
8
7
6
5
4
10-2
1
Rn (MΩ)
VR68
Revision: 21-Sep-2018
Document Number: 28907
5
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VR25, VR37, VR68
Vishay BCcomponents
www.vishay.com
Temperature Rise (T) at the Lead End (Soldering Point) as a Function of Dissipated Power at Various Lead Lengths
after Mounting
35
ΔT
(K)
30
5 mm
10 mm
25
15 mm
20
15
10
5
0
0
0
0
0.025
0.05
0.075
0.10
0.125
P (W)
0.15
0.175
0.20
0.225
0.25
VR25
40
35
30
25
20
15
10
5
ΔT
(K)
5 mm
10 mm
15 mm
0
0.1
0.2
0.3
0.4
0.5
P (W)
VR37
50
40
30
20
10
0
ΔT
(K)
10 mm
15 mm
0.2
0.4
0.6
0.8
1.0
P (W)
VR68
Revision: 21-Sep-2018
Document Number: 28907
6
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VR25, VR37, VR68
Vishay BCcomponents
www.vishay.com
TESTS PROCEDURES AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
Unless otherwise specified the following values apply:
• Temperature: 15 °C to 35 °C
• IEC 60115-1, generic specification (includes tests)
• Relative humidity: 45 % to 75 %
The test and requirements table contains only the most
important tests. For the full test schedule refer to the
documents listed above.
• Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
For performing some of the tests, the components are
mounted on a test board in accordance with IEC 60115-1,
4.31.
The tests are carried out with reference to IEC 60115-1, in
accordance with IEC 60068-2-xx test method and under
standard atmospheric conditions in accordance with
IEC 60068-1, 5.3.
In test procedures and requirements table, only the tests
and requirements are listed with reference to the relevant
clauses of IEC 60115-1 and IEC 60068-2-xx test methods.
A short description of the test procedure is also given.
A climatic category 55 / 155 / 56 is applied, defined by the
lower category temperature (LCT = -55 °C), the upper
category temperature (UCT = 155 °C), and the duration
of exposure in the damp heat, steady state test (56 days).
TESTS PROCEDURES AND REQUIREMENTS
REQUIREMENTS
IEC 60115-1 IEC 60068-2
TEST
PROCEDURE
PERMISSIBLE CHANGE
CLAUSE
TEST METHOD
(Rmax.
ins min.: 10 000 M
No breakdown or flashover
200 ppm/K
)
4.6.1.1
4.7
Insulation resistance
Voltage proof
U
max. DC = 500 V during 1 min; V-block method
R
URMS = Uins; 60 s
4.8
Temperature coefficient
At (20 / -55 / 20) °C and (20 / 155 / 20) °C
VR25: max. 5 ꢀV/V
VR37: max. 2.5 ꢀV/V
VR68: max. 2.5 ꢀV/V
4.12
4.13
4.16
Noise
IEC 60195
Room temperature; 2.5 x P70 x R ;
(voltage not more than 2 x limiting voltage);
10 cycles; 5 s ON and 45 s OFF
Short time overload
R max.: 2 % R
21 (Ua1)
21 (Ub)
21 (Uc)
Robustness of
terminations
No damage
R max.: 0.5 % R
Tensile, bending, and torsion
+235 °C; 2 s; solder bath method; SnPb40
+245 °C; 3 s; solder bath method; SnAg3Cu0.5
(before aging)
Good tinning ( 95 % covered);
no damage
4.17
20 (Ta)
Solderability
+235 °C; 2 s; solder bath method; SnPb40
+245 °C; 3 s; solder bath method; SnAg3Cu0.5
(after aging)
Good tinning ( 95 % covered);
no damage
Resistance to
soldering heat
Unmounted components
(260 5) °C; (10 1) s
4.18
4.19
4.20
20 (Tb)
14 (Na)
29 (Eb)
R max.: 0.5 % R
R max.: 0.5 % R
Rapid change
of temperature
30 min at -55 °C and 30 min at +155 °C;
5 cycles
No damage
R max.: 0.5 % R
Bump
3 x 1500 bumps in 3 directions; 40 g
10 sweep cycles per direction;
10 Hz to 2000 Hz;
No damage
R max.: 0.5 % R
4.22
6 (Fc)
Vibration
1.5 mm or 200 m/s2
4.23
Climatic sequence:
Dry heat
4.23.2
2 (Bb)
30 (Db)
1 (Ab)
16 h; 155 °C
Damp heat
cyclic
24 h; 25 °C to 55 °C;
90 % to 100 % RH
4.23.3
4.23.4
4.23.5
Cold
2 h; -55 °C
Rins min.: 1 G
R max.: 1.5 % R
2 h; 8.5 kPa;
13 (M)
Low air pressure
15 °C to 35 °C
Damp heat
remaining cyclic
5 days; 55 °C;
95 % to 100 % RH; 5 cycles
4.23.6
4.23.7
30 (Db)
DC load
Apply rated power for 1 min
Revision: 21-Sep-2018
Document Number: 28907
7
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VR25, VR37, VR68
Vishay BCcomponents
www.vishay.com
TESTS PROCEDURES AND REQUIREMENTS
REQUIREMENTS
IEC 60115-1 IEC 60068-2
TEST
PROCEDURE
PERMISSIBLE CHANGE
CLAUSE
TEST METHOD
(Rmax.
)
56 days; 40 °C;
90 % to 95 % RH; loaded with 0.01 P70
(steps: 0 V to 100 V)
Damp heat
(steady state)
4.24
78 (Cab)
R max.: 1.5 % R
1000 h; loaded with P70 or Umax.
;
4.25.1
Endurance (at 70 °C)
R max.: 1.5 % R
1.5 h ON and 0.5 h OFF
VR25: no flaming of
gauze cylinder
VR68: no flaming of
gauze cylinder
Active flammability
“cheese-cloth test”
Steps of:
4.26
4.35
5 / 10 / 16 / 25 / 40 x P70 duration 5 min
No ignition of product;
no ignition of under-layer;
burning time less than 30 s
Passive flammability
“needle-flame test”
Application of test flame for 20 s
DIMENSIONS
D
d
L1
L2
DIMENSIONS - Leaded resistor types, mass, and relevant physical dimensions
TYPE
VR25
VR37
VR68
Ø Dmax. (mm)
L1 max. (mm)
L2 max. (mm)
Ø d (mm)
0.58 0.05
0.70 0.03
0.78 0.05
MASS (mg)
212
2.5
4.0
6.8
6.5
9.0
7.5
10.0
457
18.0
19.0
1690
VR25 WITH RADIAL TAPING
Lead Spacing (F = 4.8 mm), Size 0207
P2
P
DIMENSIONS in millimeters
Pitch of components
Lead spacing
P
F
12.7 1.0
4.8 + 0.7 / - 0.0
18.0 0.5
19.5 1.0
11
Width of carrier tape
Body to hole center
W
H
H1
H
H0
Height for cutting (max.)
Height for bending
L
L1
W0
L
H0
H1
16.5 0.5
29
W
Component height (max.)
P0
P1
D0
F
α
α
α = 30° to 40°
a
a
Revision: 21-Sep-2018
Document Number: 28907
8
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VR25, VR37, VR68
Vishay BCcomponents
www.vishay.com
HISTORICAL 12NC INFORMATION
• The resistors have a 12-digit numeric code starting with
- 2322 241 refers to VR25
Last Digit of 12NC Indicating Resistance Decade
RESISTANCE DECADE
100 k to 976 k
1 M to 9.76 M
10 M
LAST DIGIT
- 2322 242 refers to VR37
4
5
6
- 2322 244 refers to VR68
• The subsequent first digit for 1 % tolerance products (E24
and E96 series) or 2 digits for 5 % (E24 series) and 10 %
(E12 series) indicate the resistor type and packing
Historical 12NC Example
• The 12NC for a VR25, resistor value 7.5 M, 5 %
tolerance, supplied on a bandoleer of 1000 units in
ammopack, is: 2322 241 13755.
• The remaining digits indicate the resistance value:
- The first 3 digits for 1 % or 2 digits for 5 % and 10 %
tolerance products indicate the resistance value
• The 12NC for a VR37, resistor value 7.5 M, 5 %
tolerance, supplied on a bandoleer of 1000 units in
ammopack, is: 2322 242 13755.
- The last digit indicates the resistance decade
• The 12NC for a VR68, resistor value 7.5 M, 5 %
tolerance, supplied on a bandoleer of 500 units in
ammopack, is: 2322 244 13755.
12NC CODING FOR VR25, VR37, VR68 - Resistor type and packaging
VR25 CODING STARTS WITH 2322 241 .....
VR37 CODING STARTS WITH 2322 242 .....
VR68 CODING STARTS WITH 2322 244 .....
TOLERANCE
(%)
BANDOLIER IN AMMOPACK
BANDOLIER ON REEL
TYPE
RADIAL TAPED
4000 UNITS
STRAIGHT LEADS
52 mm
52 mm
66.7 mm
52 mm
66.7 mm
1000 UNITS
5000 UNITS
500 UNITS
5000 UNITS
750 UNITS
1
5
0....
8....
13...
12...
8....
13...
-
7....
-
6....
23...
22...
6....
23...
-
-
VR25
36...
53...
-
-
-
10
1
38...
52...
-
-
-
-
-
-
-
-
-
-
-
VR37
VR68
5
-
-
1
8....
13...
6....
23...
5
-
-
Revision: 21-Sep-2018
Document Number: 28907
9
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
VR68000001003JAC00 替代型号
型号 | 制造商 | 描述 | 替代类型 | 文档 |
VR68000001003FAC00 | VISHAY | RES 100K OHM 1W 1% AXIAL | 功能相似 |
VR68000001003JAC00 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
VR68000001004FAC00 | VISHAY | RES 1M OHM 1W 1% AXIAL | 获取价格 | |
VR68000001004JAC00 | VISHAY | RES 1M OHM 1W 5% AXIAL | 获取价格 | |
VR68000001005FAC00 | VISHAY | RES 10M OHM 1W 1% AXIAL | 获取价格 | |
VR68000001005JAC00 | VISHAY | RES 10M OHM 1W 5% AXIAL | 获取价格 | |
VR68000001103JAC00 | VISHAY | RES 110K OHM 1W 5% AXIAL | 获取价格 | |
VR68000001104JAC00 | VISHAY | RES 1.1M OHM 1W 5% AXIAL | 获取价格 | |
VR68000001203JAC00 | VISHAY | RES 120K OHM 1W 5% AXIAL | 获取价格 | |
VR68000001204JAC00 | VISHAY | RES 1.2M OHM 1W 5% AXIAL | 获取价格 | |
VR68000001303JAC00 | VISHAY | RES 130K OHM 1W 5% AXIAL | 获取价格 | |
VR68000001304JAC00 | VISHAY | RES 1.3M OHM 1W 5% AXIAL | 获取价格 |
VR68000001003JAC00 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6