VS-50RIA100 [VISHAY]
SCR MED POWER 1000V 50A TO-65;型号: | VS-50RIA100 |
厂家: | VISHAY |
描述: | SCR MED POWER 1000V 50A TO-65 栅 栅极 |
文件: | 总8页 (文件大小:186K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VS-50RIA Series
Vishay Semiconductors
www.vishay.com
Medium Power Phase Control Thyristors
(Stud Version), 50 A
FEATURES
• High current rating
• Excellent dynamic characteristics
• dV/dt = 1000 V/μs option
• Superior surge capabilities
• Standard package
• Metric threads version available
• Types up to 1200 V VDRM/VRRM
TO-65 (TO-208AC)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
IT(AV)
50 A
TYPICAL APPLICATIONS
• Phase control applications in converters
• Lighting circuits
100 V, 200 V, 400 V, 600 V, 800 V,
1000 V, 1200 V
V
DRM/VRRM
VTM
IGT
TJ
1.60 V
100 mA
• Battery charges
• Regulated power supplies and temperature and speed
control circuit
-40 °C to 125 °C
TO-65 (TO-208AC)
Single SCR
Package
Circuit configuration
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
TEST CONDITIONS
VALUES
50
UNITS
A
°C
A
IT(AV)
TC
94
IT(RMS)
80
50 Hz
60 Hz
50 Hz
60 Hz
1430
ITSM
A
1490
10.18
9.30
I2t
kA2s
VDRM/VRRM
100 to 1200
110
V
tq
Typical
μs
°C
TJ
-40 to +125
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
VDRM/VRRM, MAXIMUM REPETITIVE
VRSM, MAXIMUM
IDRM/IRRM MAXIMUMAT
TJ = TJ MAXIMUM
mA
TYPE
NUMBER
VOLTAGE
CODE
PEAK AND OFF-STATE VOLTAGE (1)
V
NON-REPETITIVE PEAK VOLTAGE (2)
V
10
20
100
200
150
300
40
400
500
VS-50RIA
60
600
700
15
80
800
900
100
120
1000
1200
1100
1300
Notes
(1)
Units may be broken over non-repetitively in the off-state direction without damage, if dI/dt does not exceed 20 A/μs
For voltage pulses with tp 5 ms
(2)
Revision: 21-Sep-17
Document Number: 93711
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-50RIA Series
Vishay Semiconductors
www.vishay.com
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
180° sinusoidal conduction
VALUES UNITS
50
94
A
°C
A
Maximum average on-state current
at case temperature
IT(AV)
Maximum RMS on-state current
IT(RMS)
80
t = 10 ms
t = 8.3 ms
t = 10 ms
t = 8.3 ms
t = 10 ms
t = 8.3 ms
t = 10 ms
t = 8.3 ms
1430
1490
1200
1255
10.18
9.30
7.20
6.56
No voltage
reapplied
Maximum peak, one-cycle
ITSM
A
non-repetitive surge current
100 % VRRM
reapplied
Sinusoidal half wave,
initial TJ = TJ maximum
No voltage
reapplied
Maximum I2t for fusing
I2t
kA2s
100 % VRRM
reapplied
t = 0.1 to 10 ms, no voltage reapplied,
TJ = TJ maximum
Maximum I2t for fusing
I2t
101.8
kA2s
Low level value of threshold voltage
High level value of threshold voltage
VT(TO)1
VT(TO)2
(16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum
( x IT(AV) < I < 20 x x IT(AV)), TJ = TJ maximum
0.94
1.08
V
Low level value of on-state
slope resistance
rt1
(16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum
4.08
m
High level value of on-state
rt2
VTM
IH
( x IT(AV) < I < 20 x x IT(AV)), TJ = TJ maximum
3.34
1.60
200
400
slope resistance
Maximum on-state voltage
Maximum holding current
Latching current
Ipk = 157 A, TJ = 25 °C
V
TJ = 25 °C, anode supply 22 V, resistive load,
initial IT = 2 A
mA
IL
Anode supply 6 V, resistive load
SWITCHING
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES UNITS
VDRM 600 V
VDRM 1600 V
200
A/μs
100
TC = 125 °C, VDM = Rated VDRM,
Maximum rate of
rise of turned-on current
dI/dt
Gate pulse = 20 V, 15 , tp = 6 μs, tr = 0.1 μs maximum
I
TM = (2 x rated dI/dt) A
TC = 25 °C, VDM = Rated VDRM, ITM = 10 A dc resistive circuit
Gate pulse = 10 V, 15 source, tp = 20 μs
Typical delay time
td
tq
0.9
μs
TC = 125 °C, ITM = 50 A, reapplied dV/dt = 20 V/μs
dIr/dt = - 10 A/μs, VR = 50 V
Typical turn-off time
110
BLOCKING
PARAMETER
SYMBOL
TEST CONDITIONS
TJ = TJ maximum linear to 100 % rated VDRM
TJ = TJ maximum linear to 67 % rated VDRM
VALUES UNITS
200
V/μs
Maximum critical rate of rise of
off-state voltage
dV/dt
500 (1)
Note
(1)
Available with dV/dt = 1000 V/μs, to complete code add S90 i.e. 50RIA120S90
Revision: 21-Sep-17
Document Number: 93711
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-50RIA Series
Vishay Semiconductors
www.vishay.com
TRIGGERING
PARAMETER
SYMBOL
PGM
TEST CONDITIONS
TJ = TJ maximum, tp 5 ms
VALUES
10
UNITS
Maximum peak gate power
W
A
Maximum average gate power
Maximum peak positive gate current
Maximum peak positive gate voltage
Maximum peak negative gate voltage
PG(AV)
IGM
2.5
2.5
+VGM
-VGM
20
V
10
TJ = - 40 °C
TJ = 25 °C
250
100
50
DC gate current required to trigger
DC gate voltage required to trigger
IGT
mA
V
Maximum required gate trigger
current/voltage are the lowest
value which will trigger all units 6 V
anode to cathode applied
TJ = 125 °C
TJ = - 40 °C
3.5
VGT
TJ = 25 °C
2.5
TJ = TJ maximum,
Maximum gate current/voltage
not to trigger is the maximum
value which will not trigger any
unit with rated VDRM anode to
cathode applied
DC gate current not to trigger
DC gate voltage not to trigger
IGD
5.0
0.2
mA
V
V
DRM = Rated voltage
VGD
TJ = TJ maximum
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum operating junction and
storage temperature range
TJ, TStg
-40 to +125
°C
Maximum thermal resistance,
RthJC
RthCS
DC operation
0.35
junction to case
K/W
Maximum thermal resistance,
case to heat sink
Mounting surface, smooth, flat and greased
Non-lubricated threads
0.25
3.4 + 0 - 10 %
(30)
2.3 + 0 - 10 %
(20)
N · m
(lbf · in)
Allowable mounting torque
Lubricated threads
28
g
Approximate weight
Case style
1.0
oz.
See dimensions - link at the end of datasheet
TO-65 (TO-208AC)
RthJC CONDUCTION
CONDUCTION ANGLE
SINUSOIDAL CONDUCTION
RECTANGULAR CONDUCTION
TEST CONDITIONS
UNITS
180°
120°
90°
0.078
0.094
0.120
0.176
0.294
0.057
0.098
0.130
0.183
0.296
TJ = TJ maximum
K/W
60°
30°
Note
•
The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC
Revision: 21-Sep-17
Document Number: 93711
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-50RIA Series
Vishay Semiconductors
www.vishay.com
130
120
110
100
90
100
90
80
70
60
50
40
30
20
10
0
50RIA Series
thJC
DC
R
(DC) = 0.35 K/W
180°
120°
90°
60°
30°
Conduction Angle
RMS Limit
30°
60°
Conduction Period
50RIA Series
90°
30
120°
180°
T = 125°C
J
0
10 20 30 40 50 60 70 80
Average On-state Current (A)
0
10
20
40
50
60
Average On-state Current (A)
Fig. 1 - Current Ratings Characteristics
Fig. 4 - On-State Power Loss Characteristics
130
1300
At Any Rated Load Condition And With
50RIA Series
thJC
Rated V
Applied Following Surge.
RRM
R
(DC) = 0.35 K/W
Initial T = 125°C
1200
1100
1000
900
J
120
110
100
90
@60 Hz 0.0083 s
@50 Hz 0.0100 s
Conduction Period
800
90°
60°
700
120°
50RIA Series
30°
180°
DC
80
600
0
10 20 30 40 50 60 70 80
Average On-state Current (A)
1
10
100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 2 - Current Ratings Characteristics
Fig. 5 - Maximum Non-Repetitive Surge Current
80
1500
Maximum Non Repetitive Surge Current
180°
Versus Pulse Train Duration. Control
Of Conduction May Not Be Maintained.
1400
1300
1200
1100
1000
900
120°
90°
60°
30°
70
60
50
40
30
20
10
0
Initial T = 125°C
J
No Voltage Reapplied
Rated V
Reapplied
RRM
RMS Limit
Conduction Angle
50RIA Series
800
700
T = 125°C
J
50RIA Series
600
500
0.01
0
10
20
30
40
50
0.1
Pulse Train Duration (s)
1
Average On-state Current (A)
Fig. 3 - On-State Power Loss Characteristics
Fig. 6 - Maximum Non-Repetitive Surge Current
Revision: 21-Sep-17
Document Number: 93711
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-50RIA Series
Vishay Semiconductors
www.vishay.com
1000
100
10
T = 25°C
J
T = 125°C
J
50RIA Series
1
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Instantaneous On-state Voltage (V)
Fig. 7 - Forward Voltage Drop Characteristics
1
Steady State Value
= 0.35 K/W
R
thJ-hs
0.1
50RIA Series
0.01
0.001
0.01
0.1
Square Wave Pulse Duration (s)
Fig. 8 - Thermal Impedance ZthJC Characteristics
1
10
100
10
1
Rectangular gate pulse
(1) PGM = 10W, tp = 5ms
a) Recommended load line for
rated di/dt : 20V, 30 ohms; tr<=0.5 µs
b) Recommended load line for
<=30%rated di/dt : 20V, 65 ohms
tr<=1 µs
(2) PGM = 20W, tp = 2.5ms
(3) PGM = 50W, tp = 1ms
(4) PGM = 100W, tp = 500µs
(b)
(a)
(1) (2) (3) (4)
VGD
IGD
0.01
50RIA Series Frequency Limited by PG(AV)
10 100 1000
0.1
0.001
0.1
1
Instantaneous Gate Current (A)
Fig. 9 - Gate Characteristics
Revision: 21-Sep-17
Document Number: 93711
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-50RIA Series
Vishay Semiconductors
www.vishay.com
ORDERING INFORMATION TABLE
Device code
VS-
50 RIA 120 S90
M
1
2
3
4
5
6
1
-
-
-
-
-
Vishay Semiconductors product
Current code
2
Essential part number
3
4
Voltage code x 10 = VRRM (see Voltage Ratings table)
Critical dV/dt:
5
None = 500 V/μs (standard value)
S90 = 1000 V/μs (special selection)
-
None = stud base TO-65 (TO-208AC) 1/4" 28UNF-2A
M = stud base TO-65 (TO-208AC) M6 x 1
6
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95334
Revision: 21-Sep-17
Document Number: 93711
6
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
Vishay Semiconductors
www.vishay.com
TO-208AC (TO-65)
DIMENSIONS in millimeters (inches)
5.1/7.6
(0.2/0.3)
C
Ø 4.1 (Ø 0.16)
3 min.
(0.118 min.)
G
Ø 1.5 (Ø 0.06)
2.5/3.6
(0.1/0.14)
31 max.
(1.22 max.)
22.4 max.
(0.88 max.)
Ø 15 (Ø 0.59)
14.5 max.
(0.57 max.)
10.7/11.5
(0.42/0.46)
A
Note:
A = Anode
C = Cathode
G = Gate
1/4"-28UNF-2A
for metric device M6 x 1
Ø 19.2 (Ø 0.75)
17.2/17.35
(0.67/0.68)
Across flats
0.55 0.03
0.94 0.04
1.7/1.8
(0.06/0.07)
2.7 (0.106)
Revision: 02-Jun-17
Document Number: 95334
1
For technical questions within your region: DiodesAmercas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
VS-50RIA120S90M
Silicon Controlled Rectifier, 80A I(T)RMS, 1200V V(DRM), 1200V V(RRM), 1 Element, TO-208AC, TO-65, 2 PIN
VISHAY
VS-50RIA40
Silicon Controlled Rectifier, 80A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-208AC, TO-65, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明