WCCB21937400D [VISHAY]
RES NET,THIN FILM,3.74K OHMS,100WV,.5% +/-TOL,-10,10PPM TC,0505 CASE;
| 型号： | WCCB21937400D |
| 厂家： | 
VISHAY |
| 描述： | RES NET,THIN FILM,3.74K OHMS,100WV,.5% +/-TOL,-10,10PPM TC,0505 CASE 电阻器 |
| 文件： | 总3页 (文件大小：82K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CC7, CCB
Vishay Electro-Films
Thin Film Resistors on Alumina,
User Trimmable
FEATURES
• Wire bondable
Product may not
be to scale
• Small single chip size
CC7 - 0.030 inches square
CCB - 0.050 inches square
The CC7 and CCB series resistor chips offer the combination
of user trimmability, low shunt capacitance and excellent
stability. The CC7 and CCB can be specified as either a
single RT value resistor, as two resistors with a center tap
feature (1:1 ratio or custom) ratio or user trimmable.
• Alumina substrate
• Low stray capacitance: < 0.2 pF
• Resistance range RT: 100 Ω to 20 kΩ for CC7
Resistance range RT: 100 Ω to 50 kΩ for CCB
The CC7 and CCBs a six bonding pads allows the user
increased layout flexibility. The CC7 and CCBs are
manufactured using Vishay Electro-Films (EFI) sophisticated
thin film equipment and manufacturing technology. They are
• Resistor material: Nichrome
• User trimmable
100
% electrically tested and visually inspected to
MIL-STD-883.
APPLICATIONS
Vishay EFI CC7 and CCB chip resistors provide excellent high frequency response and are ideally suited for prototyping.
Typical application areas are:
• Amplifiers
• Oscillators
• Attenuators
• Couplers
• Filters
Recommended for hermetic environments where die is not exposed to moisture
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES
PROCESS CODE
Tightest Standard Tolerance Available
0.1 %
CC7
CCB
CLASS H*
219
CLASS K*
223
CLASS H*
219
CLASS K*
223
10 ꢁꢁmꢂ/C
ꢀ2 ꢁꢁmꢂ/C
20 ꢁꢁmꢂ/C
100 ꢁꢁmꢂ/C
220
224
225
226
220
221
222
224
221
225
222
226
*MIL-PRF-38534 inspection criteria
RA user trimmable 50 % above
RT value specified in P/N
20 kΩ
100 Ω
ꢀ00 Ω
1 kΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-ꢀ0ꢀ, Method 308
Stability, 1000 h, + 1ꢀ2 /C at Rated Power
Oꢁerating Temꢁerature Range
- 20 dB typ.
+ 0.1 % max. ΔR/R
- 55 °C to + 125 °C
+ 0.25 % max. ΔR/R
+ 0.25 % max. ΔR/R
400 V
Thermal shock, MIL-STD-ꢀ0ꢀ, Method 107, Test Condition F
High Temꢁerature Exꢁosure, + 120 /C, 100 h
Dielectric Voltage Breakdown
Insulation Resistance
1012 min.
Oꢁerating Voltage
100 V max.
50 mW max. (30 mil)
100 mW max. (50 mil)
DC Power Rating at 1ꢀ2 /C
2 x Rated Power Short-Time Overload, + ꢀ2 /C, 2 s
+ 0.25 % max. ΔR/R
Note: Performance characteristics are not guaranteed once user trimmed
www.vishay.com
84
For technical questions contact: efi@vishay.com
Document Number: 61012
Revision: 11-Mar-08
CC7, CCB
Thin Film Resistors on Alumina,
User Trimmable
Vishay Electro-Films
DIMENSIONS in inches
CC7
CCB
0.020
0.030
0.0072
0.002
0.002
0.016
0.002
0.032
0.030
0.020
0.002
0.002
SCHEMATIC
RT = RA + RB
RA
RB
MECHANICAL SPECIFICATIONS in inches
PARAMETER
0.030 x 0.030 0.003 (0.76 x 0.76 0.08 mm)
0.050 x 0.050 0.003 (1.27 x 1.27 0.08 mm)
Chip Size
Chip Thickness
Chip Substrate Material
Resistor Material
Bonding Pad Size
Number of Pads
Pad Material
0.010 0.002 (0.25 0.03 mm)
99.6 % alumina, 2 - 4 microinch finish
Nichrome
0.005 x 0.005 (0.12 x 0.12 mm) minimum
6
25 kÅ minimum gold standard
None
Backing
Oꢁtions: Gold back for solder die attach
Consult Application Engineer
ORDERING INFORMATION
Example: 100 % visualled, RT = 500, 10 %, 50 ppm/°C TCR, gold pads, class H vixual inspection, 30 mil size, RA user trim.
Standard user trim versions will be supplied with RA untrimmed
For custom RA, RB combinations consult Application Engineer
W
CC7
PRODUCT
FAMILY
CC7
ꢀꢀ1
PROCESS
CODE
2000
RESISTANCE
VALUE
A
MULTIPLIER
CODE
K
INSPECTION/
PACKAGING
TOLERANCE
CODE
W = 100 % visually inspected
parts
X = Sample, visually inspected
parts loaded in matrix
trays (4 % AQL)
See Process Code
table
Use first 4 digits
significant digits of the
resistance (RT)
B = 0.01
A = 0.1
0 = 1
B = 0.1 %
D = 0.5 %
F = 1.0 %
G = 2.0 %
H = 2.5 %
J = 5.0 %
K = 10 %
CCB
1 = 10
Document Number: 61012
Revision: 11-Mar-08
www.vishay.com
85
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明