XCTN26214300D [VISHAY]
RES NET,THIN FILM,1.43K OHMS,100WV,.5% +/-TOL,-25,25PPM TC,0303 CASE;型号: | XCTN26214300D |
厂家: | VISHAY |
描述: | RES NET,THIN FILM,1.43K OHMS,100WV,.5% +/-TOL,-25,25PPM TC,0303 CASE |
文件: | 总3页 (文件大小:117K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CTN
Vishay Electro-Films
Nichrome Thin Film, Center Tapped Resistors
FEATURES
• Wire bondable
Product may not
be to scale
• Center tap feature
• Chip size: 0.030 inches square
• Resistance range total: 10 Ω to 1 MΩ
• Ratio tolerances to: 0.1 %
• Resistor material: Nichrome
• Oxidized silicon substrate for good power dissipation
The CTN series is a center tapped nichrome resistor chip
providing excellent stability at 250 mW power levels. The
CTN offers the designer flexibility in use as either a single
value resistor or as two resistors with a center tap feature.
The CTNs six bonding pads allows the user increased layout
flexibility.
The CTNs are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology. The CTNs are 100 % electrically tested and
visually inspected to MIL-STD-883.
APPLICATIONS
The CTN center-tapped resistor chips are used mainly in feedback circuits of amplifiers where ratio matching, high power and
tracking between two resistors is critical.
Recommended for Hermetic environment where die is not exposed to moisture.
For low values, the resistance of the six bonding-pad configurations can vary, depending on the method of measurement used.
Vishay EFI measures low-value resistors by the four wire Kelvin technique.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES
Tightest Standard Tolerance Available
PROCESS CODE
0.1 %
0.2 %
CLASS H*
CLASS K*
263
10 ppmꢁ/C
ꢀ2 ppmꢁ/C
20 ppmꢁ/C
203
202
262
200
260
100 ppmꢁ/C
201
261
*MIL-PRF-38534 inspection criteria
1 kΩ
10 Ω
100 Ω
ꢀ00 Ω
1 MΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
TCR Tracking Between Halves (RAꢁRB)
Center Tap Ratio, RAꢁRB Tolerance
Noise, MIL-STD-ꢀ0ꢀ, Method 308, 100 Ω - ꢀ20 kΩ
Stability, 1000 h, + 1ꢀ2 /C, 1ꢀ2 mW
Operating Temperature Range
2 ppm/°C *
1
1 % standard
- 35 dB typ.
0.1 % ΔR/R
- 55 °C to + 125 °C
Dielectric Voltage Breakdown
200 V
Insulation Resistance
1012 min.
Operating Voltage
100 V max.
250 mW
DC Power Rating at + 70 /C (Derated to Zero at + 172 /C)
* 20 ppm/°C for R < 20
www.vishay.com
76
For technical questions, contact: efi@vishay.com
Document Number: 61024
Revision: 12-Mar-08
CTN
Nichrome Thin Film, Center Tapped
Vishay Electro-Films
CONFIGURATIONS in inches
0.030
STANDARD CONFIGURATION
Six locations. All pads 0.005 x 0.005 inch
RA
RB
0.0ꢀ6
0.030
TYPICAL RANGE
TYPICAL RANGE
100 Ω - 1 MΩ
TYPICAL RANGE
20 Ω - 199 Ω
10 Ω - 49 Ω
SCHEMATIC
RT = RA + RB
RA
RB
MECHANICAL SPECIFICATIONS in inches
PARAMETER
Chip Size
0.030 x 0.030 0.002 (0.762 x 0.762 0.05 mm)
0.010 0.002 (0.254 0.05 mm)
Oxidized silicon, 10 kÅ minimum SiO2
Nichrome
Chip Thickness
Chip Substrate Material
Resistor Material
Bonding Pad Size
Number of Pads
Pad Material
0.005 x 0.005 (0.127 x 0.127 mm) minimum
6
15 kÅ minimum gold standard
None, lapped semiconductor silicon
Backing
Options: Alphanumeric part marking, up to six characters
Gold backing for eutectic die attach
Center tap ratio tolerances to 0.01 %
Consult Applications Engineer
ORDERING INFORMATION
Example: 100 % visual, 10 kΩ, 1 %, 100 ppm/°C TCR, gold pads, class H visual inspection
W
CTN
PRODUCT
FAMILY
ꢀ01
PROCESS
CODE
1000
1
F
INSPECTION/
RESISTANCE
MULTIPLIER
CODE
TOLERANCE
CODE
PACKAGING
VALUE
Use first 4 significant
digits of resistance (RT)
W = 100 % visually inspected
parts in matrix trays per
MIL-STD-883
See Process Code
table
C = 0.001
B = 0.01
A = 0.1
B = 0.1 %
C = 0.2 %
D = 0.5 %
F = 1.0 %
G = 2.0 %
H = 2.5 %
J = 5.0 %
K = 10 %
X = Sample, visually inspected
parts loaded in matrixtrays (4 % AQL)
0 = 1
1 = 10
ꢀ = 100
3 = 1000
4 = 10 000
Document Number: 61024
Revision: 12-Mar-08
For technical questions, contact: efi@vishay.com
www.vishay.com
77
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明