XRCN2002501401K [VISHAY]
Data Line Filter, 8 FUNCTIONS, 25 V, DATA LINE FILTER;
| 型号： | XRCN2002501401K |
| 厂家： | 
VISHAY |
| 描述： | Data Line Filter, 8 FUNCTIONS, 25 V, DATA LINE FILTER LTE |
| 文件： | 总3页 (文件大小：115K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RCN
Vishay Electro-Films
www.vishay.com
Wire Bondable Thin Film Filter Resistor Networks
FEATURES
• Wire bondable
• Standard resistance range: 25 and 50
•
•
Standard capacitance range: 50 pF, 100 pF, 200 pF, 400 pF
Resistance tolerance to 1 %, capacitance tolerance to 5 %
• Capacitor MOS/MNOS
• Chip size: 0.135" x 0.125"
• Case: 1210
Product may not be to scale
• Resistor material: Tantalum nitride, self-passivating
• Oxidized silicon substrate
The RCN series combines resistor and capacitor technology
on a single chip to provide filtering capability together with
excellent stability. Specifications below are standard but
may be changed and customized for the application and are
available in widebody SOIC or DIP packages.
APPLICATIONS
• The RCN filter chips are used for low pass filters, RFI and
EMI, CMOS digital filters, ECL terminators and power
supply filters.
These chips are manufactured using Vishay (EFI)
sophisticated thin film equipment and manufacturing
technology. The RCNs are 100 % electrically tested and
visually inspected to MIL-STD-883.
• Contact our Sales Department for any special
configurations or requirements that are needed.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
VALUE
UNIT
Total Resistance Range
Standard Capacitace Range
Standard Tolerances
TCR
25, 50
50, 100, 200, 400
pF
0.01, 0.1,
100
1
%
ppm/°C
ppm/°C
Absolute TCC
+ 45 ꢀ5
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
VALUE
UNIT
Noise, MIL-STD-202, Method 308
100 to 250 k
< 100 or > 251 k
- 35 typ.
- 20 typ.
dB
Moisture Resistance, MIL-STD-202, Method 106
Stability, 100 h, + 125 °C, 50 mW/Res, at WVDC
Operating Temperature Range
0.5 max. R/R
%
%
°C
%
%
0.5 max. R/R
2.0 max. R/R
- 55 to + 125
Thermal Shock, MIL-STD-202, Method 10ꢀ,
Test Condition F
0.1 max. R/R
High Temperature Exposure, + 150 °C, 1000 h
Insulation Resistance
0.2 max. R/R
109 min.
25 max.
0.05
Operating Voltage
V
DC Power Rating at - 55 °C to + 125 °C (100 V max.)
W
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
(100 V max.)
0.5 max. R/R
%
Revision: 11-Nov-11
Document Number: 61013
1
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCN
Vishay Electro-Films
www.vishay.com
DIMENSIONS in inches
0.135
0.125
SCHEMATIC
Chip back plane
MECHANICAL SPECIFICATIONS
PARAMETER
VALUE
Chip Size
0.135" x 0.125" 0.005" (3.429 mm x 3.1ꢀ5 mm 0.12ꢀ mm)
0.010" 0.002" (0.254 mm 0.05 mm)
Oxidized silicon, 10 kÅ minimum SiO2
Tantalum nitride, self-passivating
0.005" x 0.00ꢀ" (0.12ꢀ mm x 0.1ꢀ8 mm)
16 (8 x RC)
Chip Thickness
Chip Substrate Mmaterial
Resistor Material
Bonding Pad Size
Number of Pads
Pad Material
10 kÅ minimum aluminum
Backing
3 kÅ minimum gold
Options: Gold bonding pads 15 kÅ minimum thickness. Consult Applications Engineer
ORDERING INFORMATION
Example: 100 % visualled, 25 , 20 %, 200 pF 20 %, 100 ppm/°C, aluminum pads, class H visual inspection
P/N:
W
RCN
200
250
A
201
M
INSPECTION/PACKAGING
PRODUCT SERIES
FAMILY
RESISTANCE
VALUE
RESISTOR
TOLERANCE
CAPACITOR
VALUE
CAPACITANCE
TOLERANCE
W = 100 % visually inspected
parts in matrix trays per
MIL-STD-883
X = Sample, commercial
visually inspected parts loaded in
matrix trays (4 % AQL)
Use the first 3
significant digits of
the resistance
B = 0.01
A = 0.1
0 = 1
1 = 10
2 = 100
Use the first 3
significant digits
of the
capacitance and
multiplier
J = 5.0 %
K = 10 %
M = 20 %
N = 25 %
and multiplier
Revision: 11-Nov-11
Document Number: 61013
2
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明