Y002150K0000D9L [VISHAY]

RES 50K OHM 3/4W 0.5% RADIAL;


型号：	Y002150K0000D9L
厂家：	VISHAY
描述：	RES 50K OHM 3/4W 0.5% RADIAL
文件：	总4页 (文件大小：322K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

VSR Series

Vishay Foil Resistors

Bulk Metal^®Foil Technology Industrial Precision Resistors

with TCR of ꢀ ꢁꢁpm/C and Tolerance of ꢂ0ꢂꢃ ꢄ

FEATURES

• Temperature coefficient of resistance (TCR) ⁽¹⁾

4 ppm/°C (0 °C to + 60 °C)

8 ppm/°C (- 55 °C to + 125 °C, + 25 °C ref.)

• Resistance range: 0.5 Ω to 1 MΩ (higher or lower

values of resistance are available)

• Vishay Foil resistors are not restricted to standard values,

we can supply specific “as required” values at no extra cost

or delivery (e.g. 1K2345 vs. 1K)

• Tolerance: to 0.01 % (100 ppm)

• Load life stability: to 0.005 % at 70 °C, 2000 h at rated

power

INTRODUCTION

Bulk Metal^®Foil technology out performs all other resistor

technologies available today for applications that require

high precision and high stability.

• Electrostatic discharge up to 25 000 V

• Non inductive, non capacitive design

• Rise time: 1 ns effectively no ringing

• Current noise: - 40 dB

• Thermal EMF: 0.05 µV/°C typical

• Voltage coefficient: < 0.1 ppm/V

• Inductance: 0.08 µH

This technology has been pioneered and developed by

VISHAY, and products based on this technology are the

most suitable for a wide range of applications.

Generally Bulk Metal Foil technology allows us to produce

customer orientated products designed to satisfy challenging

and specific technical requirements.

• Matched sets available

• Terminal finish: lead (Pb)-free

The VSR series of resistors is a low cost version of the well

established S series of resistors. These resistors are made

of foil elements so all of the inherent performance of foil is

retained. They do not however, have the same TCR or

tolerance ranges (see table 1 for details). These products

find a wide range of usage in high end stereo equipment and

some grades of test and measurement equipment.

tin/lead alloy

• Prototype samples available from 72 h. For more

information, please contact foil@vishay.com

• For better performances please review the S Series

datasheet

Note

Standoffs are dimensioned to provide a minimum lead

clearance of 0.010" between the resistor body and the

printed circuit board, when the standoffs are seated on the

board. This allows for proper cleaning after the soldering

process.

(1)

For values below 50 Ω please contact application engineering

APPLICATIONS

• Industrial

• Medical

• Audio (high end stereo equipment)

• Test and measurement equipment

• Precision amplifiers

Our applications engineering department is available to

advise and to make recommendations for non standard

technical requirements and special applications, please

FIGURE 1 - POWER DERATING CURVE

FIGURE 2 - TRIMMING TO VALUES

(Conceptual Illustration)

- 55 °C

+ 70 °C

2ꢂꢂ %

ꢃ75 %

ꢃ5ꢂ %

ꢃ25 %

ꢃꢂꢂ %

75 %

5ꢂ %

25 %

ꢂ

Double Rated Power

Current Path

Interloop Capacitance

Before Trimming

Reduction in Series

Rated Power

Current Path

After Trimming

Mutual Inductance

Trimming Process

Removes this Material

from Shorting Strip Area

Changing Current Path

and Increasing

Reduction due

to Change in

Safe operation

for < 150 ppm

ΔR after 2000

hours load-life.

Current Direction

Resistance

- 75 - 5ꢂ - 25

ꢂ

+ 25 + 5ꢂ + 75 + ꢃꢂꢂ + ꢃ25 + ꢃ5ꢂ + ꢃ75 + 2ꢂꢂ

Apbient Tepꢁerature (°C)

Note: Foil shown in black, etched spaces in white

* Pb containing terminations are not RoHS compliant, exemptions may apply

Document Number: 63009

Revision: 23-Mar-10

For any questions, contact: foil@vishaypg.com

www.foilresistors.com

VSR Series

Vishay Foil Resistors

FIGURE 3 - IMPRINTING AND DIMENSIONS

Front View

Rear View

Resistance

Value Code

Date Code

ꢂ7 ꢃꢂ

Year Week

VISHAY

XXXX

VSRꢀ

ꢃꢂꢂRꢂꢃ

ꢂ0ꢂꢃ %

Tolerance

Lead Material #22AWG

Round Solder Coated Coꢁꢁer

Model Nupber

TABLE 1 - MODEL SELECTION

DIMENSIONS

MAXIMUM

TIGHTEST

LOAD LIFE

POWER POWER MAXIMUM

TEMPERATURE TOLERANCE ꢄ

MODEL

NUMBER

RESISTANCE

STABILITY

(MAXIMUM

WORKING

COEFFICIENT

OFRESISTANCE

(+ 25 /C REF0)

VS0 LOWEST

RESISTANCE

VALUE (Ω)

(Ω)

INCHES

+ 7ꢂ /C + ꢃ25 /C VOLTAGE

ΔR)

VSR

1 to 150K

1 to 500K

1 to 750K

0.5 to 1M

0.3 W

0.2 W

300

350

500

W: 0.105 0.010

L: 0.300 0.010

H: 0.326 0.010

2.67 0.25

7.62 0.25

8.28 0.25

0.05 %

2000 hours

at + 125 °C

0 °C to + 60 °C

4 ppm/°C

0.01/50

0.02/30

0.05/5

0.1/2

up to 100K

VSRJ ^(ꢃ)0

0.25 W

0.15 W

ST: 0.010 minimum 0.254 minimum

SW: 0.040 0.005

LL: 1.000 0.125

LS: 0.150 0.005¹⁾

1.02 0.13

25.4 3.18

3.81 0.13

- 55 °C to + 125 °C

8 ppm/°C

over 100K

0.5/1

VSRꢀ

VSR5

VSR6

0.5 W

0.4 W

0.2 W

W: 0.160 maximum 4.06 maximum

L: 0.575 maximum 14.61 maximum

H: 0.413 maximum 10.49 maximum

ST: 0.035 0.005

SW: 0.050 0.005

LL: 1.000 0.125

LS: 0.400 0.020

up to 200K

0.25 W

0.89 0.13

1.27 0.13

25.4 3.18

10.16 0.51

0.005/100

0.01/50

0.02/30

0.05/5

0.1/2

over 200K

0.75 W

0.6 W

0.3 W

W: 0.160 maximum 4.06 maximum

L: 0.820 maximum 20.83 maximum

H: 0.413 maximum 10.49 maximum

ST: 0.035 0.005

SW: 0.050 0.005

LL: 1.000 0.125

LS: 0.650 0.020

up to 300K

0.4 W

0.89 0.13

1.27 0.13

25.4 3.18

16.51 0.51

over 300K

1.0 W

0.8 W

0.4 W

W: 0.260 maximum 6.60 maximum

L: 1.200 maximum 30.48 maximum

H: 0.413 maximum 10.49 maximum

ST: 0.035 0.005

SW: 0.050 0.005

LL: 1.000 0.125

LS: 0.900 0.020

up to 400K

0.5/1

0.5 W

0.89 0.13

1.27 0.13

25.4 3.18

22.86 0.51

over 400K

Note

(1)

0.200" (5.08 mm) lead spacing available - specify VSRJ.

FIGURE 4 - TEMPERATURE COEFFICIENT OF RESISTANCE

+ ꢀꢂꢂ

+ 2ꢂꢂ

+ ꢀ ꢁꢁpm/C

+ ꢃꢀꢂ

- ꢃꢀꢂ

+ ꢃꢂꢂ

ΔR

ꢂ

(ꢁꢁp)

- ꢃꢂꢂ

- ꢀ ꢁꢁpm/C

- 2ꢂꢂ

- ꢀꢂꢂ

ꢂ

+ 25

+ 6ꢂ

Tepꢁerature,/C

www.foilresistors.com

For any questions, contact: foil@vishaypg.com

Document Number: 63009

Revision: 23-Mar-10

VSR Series

Vishay Foil Resistors

TABLE 2 - GLOBAL PART NUMBER INFORMATION

NEW GLOBAL PART NUMBER: Yꢂꢂ75ꢃꢂꢂK25ꢂA9L (ꢁreferred ꢁart nupber forpat)

DENOTES PRECISION

VALUE

CHARACTERISTICS ⁽¹⁾

R = Ω

K = kΩ

M = MΩ

ꢂ = standard

9 = lead (Pb)-free

ꢃ - 999 = custom

ꢂ

ꢃ

ꢂ

PRODUCT CODE

RESISTANCE TOLERANCE

PACKAGING

ꢂꢂ75 = VSR

ꢂ789 = VSRJ

ꢂꢂ2ꢂ = VSR4

ꢂꢂ2ꢃ = VSR5

ꢂꢂ22 = VSR6

T = 0.01 %

Q = 0.02 %

A = 0.05 %

B = 0.1 %

C = 0.25 %

D = 0.5 %

F = 1.0 %

L = bulk pack

FOR EXAMPLE: ABOVE GLOBAL ORDER Y0075 100K250 A 9 L:

TYPE: VSR

VALUE: 100.25 kΩ

ABSOLUTE TOLERANCE: 0.05 %

TERMINATION: lead (Pb)-free

PACKAGING: bulk pack

HISTORICAL PART NUMBER EXAMPLE: VSRT ꢃꢂꢂK25 A B (will continue to be used)

VSR

ꢃꢂꢂK25

RESISTANCE

TOLERANCE

MODEL

TERMINATION

OHMIC VALUE

PACKAGING

VSR

VSRJ

VSRꢀ

VSR5

VSR6

T = lead (Pb)-free

None = tin/lead alloy

100.25 kΩ

T = 0.01 %

Q = 0.02 %

A = 0.05 %

B = 0.1 %

C = 0.25 %

D = 0.5 %

F = 1.0 %

B = bulk pack

Note

(1)

For non-standard requests, please contact application engineering.

Document Number: 63009

Revision: 23-Mar-10

For any questions, contact: foil@vishaypg.com

www.foilresistors.com

Legal Disclaimer Notice

Vishay Precision Group, Inc.

Disclaimer

ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Vishay Precision Group, Inc., its afﬁliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in

any other disclosure relating to any product.

The product speciﬁcations do not expand or otherwise modify VPG’s terms and conditions of purchase, including but

not limited to, the warranty expressed therein.

VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.

To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the

application or use of any product, (ii) any and all liability, including without limitation special, consequential or

incidental damages, and (iii) any and all implied warranties, including warranties of ﬁtness for particular purpose,

non-infringement and merchantability.

Information provided in datasheets and/or speciﬁcations may vary from actual results in different applications and

performance may vary over time. Statements regarding the suitability of products for certain types of applications

are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s

responsibility to validate that a particular product with the properties described in the product speciﬁcation is suitable for

use in a particular application. You should ensure you have the current version of the relevant information by contacting

VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.

No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any

conduct of VPG.

The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise

expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do

so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.

Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such

applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document No.: 63999

Revision: 15-Jul-2014

www.vpgsensors.com

Y002150K0000D9L [VISHAY]

相关型号：

Y002150R0000D9L

Y002150R0000T0L

Y0021511K000B0L

Y002151K7000T0L

Y002151R0000B0L

Y002151R0000T0L

Y0021555K560T9L

Y0021569K000Q9L

Y0021590K000C0L

Y00215K20000B9L

Y00215K76000T9L

Y0021604R000B9L