Y007510K0000F9L [VISHAY]
RES 10K OHM 0.3W 1% RADIAL;型号: | Y007510K0000F9L |
厂家: | VISHAY |
描述: | RES 10K OHM 0.3W 1% RADIAL |
文件: | 总4页 (文件大小:322K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VSR Series
Vishay Foil Resistors
Bulk Metal® Foil Technology Industrial Precision Resistors
with TCR of ꢀ ꢁꢁpm/C and Tolerance of ꢂ0ꢂꢃ ꢄ
FEATURES
• Temperature coefficient of resistance (TCR) (1)
4 ppm/°C (0 °C to + 60 °C)
:
8 ppm/°C (- 55 °C to + 125 °C, + 25 °C ref.)
• Resistance range: 0.5 Ω to 1 MΩ (higher or lower
values of resistance are available)
• Vishay Foil resistors are not restricted to standard values,
we can supply specific “as required” values at no extra cost
or delivery (e.g. 1K2345 vs. 1K)
• Tolerance: to 0.01 % (100 ppm)
• Load life stability: to 0.005 % at 70 °C, 2000 h at rated
power
INTRODUCTION
Bulk Metal® Foil technology out performs all other resistor
technologies available today for applications that require
high precision and high stability.
• Electrostatic discharge up to 25 000 V
• Non inductive, non capacitive design
• Rise time: 1 ns effectively no ringing
• Current noise: - 40 dB
• Thermal EMF: 0.05 µV/°C typical
• Voltage coefficient: < 0.1 ppm/V
• Inductance: 0.08 µH
This technology has been pioneered and developed by
VISHAY, and products based on this technology are the
most suitable for a wide range of applications.
Generally Bulk Metal Foil technology allows us to produce
customer orientated products designed to satisfy challenging
and specific technical requirements.
• Matched sets available
• Terminal finish: lead (Pb)-free
The VSR series of resistors is a low cost version of the well
established S series of resistors. These resistors are made
of foil elements so all of the inherent performance of foil is
retained. They do not however, have the same TCR or
tolerance ranges (see table 1 for details). These products
find a wide range of usage in high end stereo equipment and
some grades of test and measurement equipment.
tin/lead alloy
• Prototype samples available from 72 h. For more
information, please contact foil@vishay.com
• For better performances please review the S Series
datasheet
Note
Standoffs are dimensioned to provide a minimum lead
clearance of 0.010" between the resistor body and the
printed circuit board, when the standoffs are seated on the
board. This allows for proper cleaning after the soldering
process.
(1)
For values below 50 Ω please contact application engineering
APPLICATIONS
• Industrial
• Medical
• Audio (high end stereo equipment)
• Test and measurement equipment
• Precision amplifiers
Our applications engineering department is available to
advise and to make recommendations for non standard
technical requirements and special applications, please
contact us.
FIGURE 1 - POWER DERATING CURVE
FIGURE 2 - TRIMMING TO VALUES
(Conceptual Illustration)
- 55 °C
+ 70 °C
2ꢂꢂ %
ꢃ75 %
ꢃ5ꢂ %
ꢃ25 %
ꢃꢂꢂ %
75 %
5ꢂ %
25 %
ꢂ
Double Rated Power
Current Path
Interloop Capacitance
Before Trimming
Reduction in Series
Rated Power
Current Path
After Trimming
Mutual Inductance
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Reduction due
to Change in
Safe operation
for < 150 ppm
R after 2000
hours load-life.
Current Direction
Resistance
- 75 - 5ꢂ - 25
ꢂ
+ 25 + 5ꢂ + 75 + ꢃꢂꢂ + ꢃ25 + ꢃ5ꢂ + ꢃ75 + 2ꢂꢂ
Apbient Tepꢁerature (°C)
Note: Foil shown in black, etched spaces in white
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63009
Revision: 23-Mar-10
For any questions, contact: foil@vishaypg.com
www.foilresistors.com
1
VSR Series
Vishay Foil Resistors
FIGURE 3 - IMPRINTING AND DIMENSIONS
Front View
Rear View
L
W
Resistance
Value Code
Date Code
ꢂ7 ꢃꢂ
Year Week
VISHAY
XXXX
VSRꢀ
ꢃꢂꢂRꢂꢃ
ꢂ0ꢂꢃ %
H
Tolerance
ST
LL
SW
Lead Material #22AWG
Round Solder Coated Coꢁꢁer
Model Nupber
LS
TABLE 1 - MODEL SELECTION
DIMENSIONS
MAXIMUM
TIGHTEST
LOAD LIFE
POWER POWER MAXIMUM
TEMPERATURE TOLERANCE ꢄ
MODEL
NUMBER
RESISTANCE
STABILITY
(MAXIMUM
at
at
WORKING
COEFFICIENT
OFRESISTANCE
(+ 25 /C REF0)
VS0 LOWEST
RESISTANCE
VALUE (Ω)
(Ω)
INCHES
pp
+ 7ꢂ /C + ꢃ25 /C VOLTAGE
ΔR)
VSR
1 to 150K
1 to 500K
1 to 750K
0.5 to 1M
0.3 W
0.2 W
300
350
350
500
W: 0.105 0.010
L: 0.300 0.010
H: 0.326 0.010
2.67 0.25
7.62 0.25
8.28 0.25
0.05 %
2000 hours
at + 125 °C
0 °C to + 60 °C
4 ppm/°C
0.01/50
0.02/30
0.05/5
0.1/2
up to 100K
VSRJ (ꢃ)0
0.25 W
0.15 W
ST: 0.010 minimum 0.254 minimum
SW: 0.040 0.005
LL: 1.000 0.125
LS: 0.150 0.0051)
1.02 0.13
25.4 3.18
3.81 0.13
- 55 °C to + 125 °C
8 ppm/°C
over 100K
0.5/1
VSRꢀ
VSR5
VSR6
0.5 W
0.4 W
0.2 W
W: 0.160 maximum 4.06 maximum
L: 0.575 maximum 14.61 maximum
H: 0.413 maximum 10.49 maximum
ST: 0.035 0.005
SW: 0.050 0.005
LL: 1.000 0.125
LS: 0.400 0.020
up to 200K
0.25 W
0.89 0.13
1.27 0.13
25.4 3.18
10.16 0.51
0.005/100
0.01/50
0.02/30
0.05/5
0.1/2
over 200K
0.75 W
0.6 W
0.3 W
W: 0.160 maximum 4.06 maximum
L: 0.820 maximum 20.83 maximum
H: 0.413 maximum 10.49 maximum
ST: 0.035 0.005
SW: 0.050 0.005
LL: 1.000 0.125
LS: 0.650 0.020
up to 300K
0.4 W
0.89 0.13
1.27 0.13
25.4 3.18
16.51 0.51
over 300K
1.0 W
0.8 W
0.4 W
W: 0.260 maximum 6.60 maximum
L: 1.200 maximum 30.48 maximum
H: 0.413 maximum 10.49 maximum
ST: 0.035 0.005
SW: 0.050 0.005
LL: 1.000 0.125
LS: 0.900 0.020
up to 400K
0.5/1
0.5 W
0.89 0.13
1.27 0.13
25.4 3.18
22.86 0.51
over 400K
Note
(1)
0.200" (5.08 mm) lead spacing available - specify VSRJ.
FIGURE 4 - TEMPERATURE COEFFICIENT OF RESISTANCE
+ ꢀꢂꢂ
+ 2ꢂꢂ
+ ꢀ ꢁꢁpm/C
+ ꢃꢀꢂ
- ꢃꢀꢂ
+ ꢃꢂꢂ
ΔR
R
ꢂ
(ꢁꢁp)
- ꢃꢂꢂ
- ꢀ ꢁꢁpm/C
- 2ꢂꢂ
- ꢀꢂꢂ
ꢂ
+ 25
+ 6ꢂ
Tepꢁerature,/C
www.foilresistors.com
2
For any questions, contact: foil@vishaypg.com
Document Number: 63009
Revision: 23-Mar-10
VSR Series
Vishay Foil Resistors
TABLE 2 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Yꢂꢂ75ꢃꢂꢂK25ꢂA9L (ꢁreferred ꢁart nupber forpat)
DENOTES PRECISION
VALUE
CHARACTERISTICS (1)
Y
R = Ω
K = kΩ
M = MΩ
ꢂ = standard
9 = lead (Pb)-free
ꢃ - 999 = custom
Y
ꢂ
ꢂ
7
5
ꢃ
ꢂ
ꢂ
K
2
5
ꢂ
A
9
L
PRODUCT CODE
RESISTANCE TOLERANCE
PACKAGING
ꢂꢂ75 = VSR
ꢂ789 = VSRJ
ꢂꢂ2ꢂ = VSR4
ꢂꢂ2ꢃ = VSR5
ꢂꢂ22 = VSR6
T = 0.01 %
Q = 0.02 %
A = 0.05 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1.0 %
L = bulk pack
FOR EXAMPLE: ABOVE GLOBAL ORDER Y0075 100K250 A 9 L:
TYPE: VSR
VALUE: 100.25 kΩ
ABSOLUTE TOLERANCE: 0.05 %
TERMINATION: lead (Pb)-free
PACKAGING: bulk pack
HISTORICAL PART NUMBER EXAMPLE: VSRT ꢃꢂꢂK25 A B (will continue to be used)
VSR
T
ꢃꢂꢂK25
A
B
RESISTANCE
TOLERANCE
MODEL
TERMINATION
OHMIC VALUE
PACKAGING
VSR
VSRJ
VSRꢀ
VSR5
VSR6
T = lead (Pb)-free
None = tin/lead alloy
100.25 kΩ
T = 0.01 %
Q = 0.02 %
A = 0.05 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1.0 %
B = bulk pack
Note
(1)
For non-standard requests, please contact application engineering.
Document Number: 63009
Revision: 23-Mar-10
For any questions, contact: foil@vishaypg.com
www.foilresistors.com
3
Legal Disclaimer Notice
Vishay Precision Group, Inc.
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.
The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.
VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.
Copyright Vishay Precision Group, Inc., 2014. All rights reserved.
Document No.: 63999
Revision: 15-Jul-2014
www.vpgsensors.com
1
相关型号:
Y007510R2000F9L
Fixed Resistor, Metal Foil, 0.3W, 10.2ohm, 300V, 1% +/-Tol, -8,8ppm/Cel, 3011,
VISHAY
©2020 ICPDF网 联系我们和版权申明