Y07342R00000A9L [VISHAY]
RES,4 TERMINALS,METAL FOIL,2 OHMS,350WV,.05% +/-TOL,-2,2PPM TC;型号: | Y07342R00000A9L |
厂家: | VISHAY |
描述: | RES,4 TERMINALS,METAL FOIL,2 OHMS,350WV,.05% +/-TOL,-2,2PPM TC 电阻器 |
文件: | 总5页 (文件大小:317K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VFP-3, VFP-4
Vishay Foil Resistors
Bulk Metal® Foil Technology Power
and Current Sensing Resistors with TCR of 2 ppm/°C,
Tolerance to ꢀ0ꢀꢁ ꢂ and power up to ꢁꢀ W
FEATURES
Temperature Coefficient of Resistance (TCR):
2 ppm/°C typical (- 55 °C to + 125 °C,
+ 25 °C Ref.) (see Tables 1 and 2)
Tolerance: to 0.01 % (see Tables 1 and 2)
Power Rating (heat-sinked): 10 W
Load Life Stability: 0.005 % at 25 °C,
2000 hours at Rated Power
Resistance Range: 0.05 to 80 k
Electrostatic Discharge (ESD) above 25 000 V
Non Inductive, Non Capacitive Design
Rise Time: 1 ns without Ringing
Current Noise: < - 40 dB
Thermal EMF: 0.05 µV/°C typical
Voltage Coefficient: < 0.1 ppm/V
Non Inductive: < 0.08 µH
Any value available within resistance range
The basic features of Vishay Bulk Metal® Foil resistors; tight
resistance tolerance, fast response time, low TCR, and
exceptional long-term stability, are available for power-circuit
applications. Typical applications are non-inductive design,
current sensing applications, deflection amplifiers, constant
current power supplies, forced balance electronic scales,
graphic display computers, character generation on CRTs,
and electron beam controls.
Non Hot Spot Design
Terminal Finishes Available: Lead (Pb)-free
Our Application Engineering Department is available to
advise and to make recommendations. For non-standard
technical requirements and special applications, please
contact us.
Tin/Lead Alloy
Any Value available within Resistance Range (e.g.
1K2345)
Prototype Samples available from 48 hours. For more
Information, please contact foil@vishaypg.com
R
I
I
For better Performances, please see VFP-3Z and VFP-4Z
Datasheets
Iꢁ
Eꢁ
E2
I2
V
TABLE 1 - VFP-31) SPECIFICATIONS
TABLE 2 - VFP-41), 2) SPECIFICATIONS
RESISTANCE
RANGE ()
STANDARD
TOLERANCE
TYPICAL
MAXIMUM
RESISTANCE
RANGE ()
STANDARD
TOLERANCE
TYPICAL
MAXIMUM
TCR3)
TCR3)
TCR3)
TCR3)
50 to 80K
25 to < 50
10 to < 25
5 to < 10
0.01 %
0.02 %
0.05 %
0.1 %
0.25 %
0.5 %
1.0 %
2.0 %
5.0 %
5 ppm/°C
7 ppm/°C
10 ppm/°C
13 ppm/°C
20 ppm/°C
25 ppm/°C
10 to 500
5 to < 10
0.01 %
0.02 %
0.05 %
0.1 %
5 ppm/°C
6 ppm/°C
8 ppm/°C
10 ppm/°C
15 ppm/°C
20 ppm/°C
25 ppm/°C
30 ppm/°C
2 to < 5
1 to < 2
2 to < 5
2 ppm/°C
2 ppm/°C
0.5 to < 1
0.25 to < 0.5
0.1 to < 0.25
0.05 to < 0.1
0.25 %
0.5 %
1 to < 2
0.5 to < 1
0.25 to < 0.5
0.1 to < 0.25
1.0 %
50 ppm/°C
2.0 %
Notes
Tighter tolerance available upon request
See page 3 in this data sheet for numbered footnotes.
1. Weight = 15 g Max
2. VFP-4 available up to 500 .
3. - 55 °C to + 125 °C, + 25 °C Ref.
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63014
Revision: 23-Mar-10
For any questions, contact: foil@vishaypg.com
www.foilresistors.com
1
VFP-3, VFP-4
Vishay Foil Resistors
FIGURE 1 - STANDARD IMPRINTING AND DIMENSIONS in inches (millimeters)
VFP-3
ꢁ0575 ꢀ0ꢀꢁ1 (4ꢀ0ꢀꢁ ꢀ04ꢁ)
VFP-4
ꢁ0575 ꢀ0ꢀꢁ1 (4ꢀ0ꢀꢁ ꢀ04ꢁ)
+ ꢀ0ꢀꢀ4
- ꢀ0ꢀꢀ8
+ ꢀ0ꢁ
+ ꢀ0ꢁ
(70ꢀꢁ
- ꢀ02
+ ꢀ0ꢀꢀ4
- ꢀ0ꢀꢀ8
ꢀ0271
(70ꢀꢁ
)
- ꢀ02
)
ꢀ0271
ꢁ0ꢁ8ꢁ ꢀ0ꢀꢁ1 (3ꢀ ꢀ04ꢁ)
ꢁ0ꢁ8ꢁ ꢀ0ꢀꢁ1 (3ꢀ ꢀ04ꢁ)
ꢀ0ꢁꢁ8 (30ꢀꢀ)
ꢀ0ꢁꢁ8 (30ꢀꢀ)
ꢀ0ꢁ97 (50ꢀꢀ)
ꢀ0ꢁ97 (50ꢀꢀ)
ꢀ0ꢁ5ꢀ ꢀ0ꢀꢀ4
(308ꢁ ꢀ0ꢁ)
ꢀ0ꢁ5ꢀ ꢀ0ꢀꢀ4
(308ꢁ ꢀ0ꢁ)
VISHAY
VFP-3
VISHAY
VFP-4
ꢀ0787 ꢀ0ꢀꢁ1
(ꢁ9099 ꢀ04ꢁ)
ꢀ0787 ꢀ0ꢀꢁ1
(ꢁ9099 ꢀ04ꢁ)
(Value)
(Value)
(Tol0)
(Date Code)
(Tol0)
(Date Code)
ꢀ0394 ꢀ0ꢀꢀ8
(ꢁꢀ0ꢀꢁ ꢀ02)
ꢀ0394 ꢀ0ꢀꢀ8
(ꢁꢀ0ꢀꢁ ꢀ02)
Lead Dia0
Lead Dia0
ꢁ0ꢀꢀ Min0
(2504 Min0)
ꢁ0ꢀꢀ Min0
(2504 Min0)
ꢀ0ꢀ25 (ꢀ014)
Solder Coated
Copper
ꢀ0ꢀ25 (ꢀ0133)
Solder Coated
Copper
I
E
E
I
2
ꢁ
ꢁ
2
ꢀ01ꢀꢀ (ꢁ5024)
ꢀ02ꢀꢀ [x3] (50ꢀ8)
TABLE 3 - SPECIFICATIONS
Stability
Load Life at 2000 hours
Power Rating
At + 25 °C
0.05 % maximum R under full rated power (3 W at + 25 °C)
10 W or 3 A1) on heat sink2)
3 W or 3 A1) in free air
Power rating based on R. Further derating not necessary.
< 0.010 µV (RMS)/V of applied voltage (- 40 dB)
Current Noise
High Frequency Operation
Rise Time
1.0 ns at 1 k
Inductance (L)3)
0.1 µH maximum; 0.08 µH typical
1.0 pF maximum; 0.5 pF typical
< 0.1 ppm/V4)
Capacitance (C)
Voltage Coefficient
Operating Temp0 Range
Maximum Working Voltage5)
Thermal EMF1)
- 55 °C to + 150 °C
350 V
0.5 µV/°C typical (lead effect)
FIGURE 2 - POWER DERATING CURVE
FIGURE 3 - TRIMMING TO VALUES
(Conceptual Illustration)
- 55 °C
Rated Power
+ 100
+ 75
+ 50
+ 25
0
Current Path
Before Trimming
Interloop Capacitance
Reduction in Series
Current Path
After Trimming
Trimming Process
Mutual Inductance
Reduction due
to Change in
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Current Direction
- 75 - 50 - 25
0
+ 25 + 50 + 75 + 100 + 125+ 150 + 175
Resistance
Ambient Temperature (°C)
Note: Foil shown in black, etched spaces in white
www.foilresistors.com
2
For any questions, contact: foil@vishaypg.com
Document Number: 63014
Revision: 23-Mar-10
VFP-3, VFP-4
Vishay Foil Resistors
TABLE 4 - POWER RESISTOR ENVIRONMENTAL PERFORMANCE COMPARISON
VFP-3, VFP-4
MAXIMUM
METHOD
MIL-PRF-39ꢀꢀ9
R LIMITS
PARAGRAPH7)
TEST DATAꢁꢀ)
TEST GROUP I
Conditioning
4.8.2
4.8.4
0.2 % + 0.01
0.03 %
TEST GROUP II
Resistance Temperature Characteristic
(- 55 °C to + 125 °C)
< 1 : 100 ppm/°C;
1 to 19.6 : 50 ppm/°C;
20 : 30 ppm/°C
0.3 % + 0.01
See
tables 1 and 2
Low Temp Storage
DWV
4.8.16
0.01 %
(750 V at atmosphere pressure)
Insulation Resistance
Low Temp Operation
Short time Overload9)
Moisture Resistance
Terminal Strength
4.8.5
4.8.6
4.8.7
4.8.8
4.8.9
4.8.10
0.2 % + 0.01
104 M
0.005 %
> 104 M
0.01 %
0.3 % + 0.01
0.3 % + 0.01
0.5 % + 0.01
0.2 % + 0.01
0.01 %
0.05 %
0.005 %
TEST GROUP III
Shock - Specified Pulse
Vibration - High Frequency
TEST GROUP IV
4.8.11
4.8.12
0.2 % + 0.01
0.2 % + 0.01
0.01 %
0.005 %
Life Test
10 W at + 25 °C for 2000 hours
60 % power at + 70 °C
for 2000 hours
4.8.13
-
1.0 % + 0.01
0.05 %
0.05 %
-
TEST GROUP V
High Temp Exposure
(2000 hours at + 150 °C)
4.8.14
1.0 % + 0.01
0.03 %
Notes
1. Whichever is lower.
5. Not to exceed power rating of resistor.
2. Heat sink chassis dimensions and requirements per
MIL-PRF-39009:
6. µV/°C relates to EMF due to lead temperature difference and
µV/watt due to power applied to the resistor.
7. Vishay test data as compared to MIL-PRF-39009 is shown for
illustration purposes, Vishay test conditions that deviate from the
MIL test method are noted within parentheses.
INCHES
6.00
4.00
2.00
0.04
MILLIMETERS
152.4
L
W
H
T
101.6
50.8
1.0
8. Maximum ambient temperature rating is + 150 °C.
9. Maximum overload rating is 15 W (5 x rated power in free air;
1.5 x rated power on heat sink), with applied voltage not to
exceed 750 V.
3. Inductance (L) due mainly to the leads.
4. The resolution limit of existing test equipment (within the
measurement capability of the equipment, or "essentially zero").
10. R’s are as shown plus 0.001
to allow for measurement errors
at low resistance values.
Document Number: 63014
Revision: 23-Mar-10
For any questions, contact: foil@vishaypg.com
www.foilresistors.com
3
VFP-3, VFP-4
Vishay Foil Resistors
TABLE 5 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Yꢀ7332ꢁK5ꢀꢀꢀT9L (preferred part number format)
DENOTES PRECISION
VALUE
AER*
Y
R =
K = k
ꢀ = Standard
9 = Lead (Pb)-free
ꢁ - 999 = Custom
Y
ꢀ
7
3
3
2
ꢁ
K
5
ꢀ
ꢀ
ꢀ
T
9
L
PRODUCT CODE
RESISTANCE TOLERANCE
PACKAGING
ꢀ733 = VFP-3
ꢀ734 = VFP-4
T = 0.01 %
Q = 0.02 %
A = 0.05 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1.0 %
G = 2.0 %
J = 5.0 %
L = Bulk Pack
FOR EXAMPLE: ABOVE GLOBAL ORDER Y0733 21K5000 T 9 L:
TYPE: VFP-3
VALUE: 21.5 k
ABSOLUTE TOLERANCE: 0.01 %
TERMINATION: Lead (Pb)-free
PACKAGING: Bulk Pack
HISTORICAL PART NUMBER: VFP-3T 2ꢁK5ꢀꢀ T B (will continue to be used)
VFP-3
T
2ꢁK5ꢀꢀ
T
B
RESISTANCE
TOLERANCE
MODEL
TERMINATION
OHMIC VALUE
PACKAGING
VFP-3
VFP-4
T = Lead (Pb)-free
None = Tin/Lead alloy
21.5 k
T = 0.01 %
Q = 0.02 %
A = 0.05 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1.0 %
G = 2.0 %
J = 5.0 %
B = Bulk Pack
Note
* For non-standard requests, please contact Application Engineering.
www.foilresistors.com
4
For any questions, contact: foil@vishaypg.com
Document Number: 63014
Revision: 23-Mar-10
Legal Disclaimer Notice
Vishay Precision Group, Inc.
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.
The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.
VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.
Copyright Vishay Precision Group, Inc., 2014. All rights reserved.
Document No.: 63999
Revision: 15-Jul-2014
www.vpgsensors.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明