Y1365V0176BQ9U [VISHAY]
RES ARRAY 4 RES 2K OHM 8SOIC;型号: | Y1365V0176BQ9U |
厂家: | VISHAY |
描述: | RES ARRAY 4 RES 2K OHM 8SOIC |
文件: | 总5页 (文件大小:455K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMN
High Precision Surface Mount 4 Resistor Network
Dual-In-Line Package with TCR Tracking ≤0.5 ppm/°C,
Tolerance Match of 0.01% and Ratio Stability of 0.005%
FEATURES
• Temperature coefficient of resistance (TCR)
(–55°C to +125°C, +25°C ref):
- Absolute: 0.2 ppmꢀ°C typical (see Table 2)
- Tracking: 0.5 ppmꢀ°C typical (see Table 2)
• Power rating (at 70°C):
- Entire package: 0.4 W
- Each resistor: 0.1 W
• Resistance tolerance match: 0.01%
• Ratio stability: 0.005% (0.1 W at 70°C, 2000 hours)
• Large variety of resistance ratios
• Electrostatic discharge (ESD) to 25 kV
• Short time overload: ≤0.0025%
• Non inductive, non capacitive design
• Rise time: 1 ns without ringing
• Current Noise: <– 40 dB
Any value and any ratio available within resistance range
INTRODUCTION
Bulk Metal® Foil (BMF) Technology outperforms all other
resistor technologies available today for applications that
require high precision and high stability.
• Thermal EMF: 0.05 μVꢀ°C
• Voltage coefficient <0.1 ppmꢀV
• Non inductive: <0.08 μH
This technology has been pioneered and developed
by Vishay Foil Resistors, and products based on this
technology are the most suitable for a wide range of
applications.
• Non hot spot design
• Terminal finishes available: Lead (Pb)-free; TinꢀLead
alloy
BMF technology allows us to produce Customer
Orientated products designed to satisfy challenging and
specific technical requirements.
• For better performances please contact us
• Available with Z-Foil technology, please see SMNZ
datasheet.
Model SMN offers low TCR (absolute and tracking),
excellent load life stability, tight tolerance (absolute and
match), excellent ratio stability, low thermal EMF, low
current noise and low voltage coefficient - all in the same
resistor.
APPLICATIONS
• Instrumentation amplifiers
• Bridge networks
The SMN Surface Mount Network is made up of 4
independent BMF resistors in a small standard molded
epoxy package with 50 MIL lead pitch (JEDEC MS-012
package).
• Differential amplifiers
• Ratio arms in bridge circuits
• Medical and test equipment
• Military
The electrical specification of this integrated construction
offers improved performance and better real estate
utilization over discrete resistors and matched sets. The
resistor may be used independently or as divider pairs.
R
2
• Airborne, etc.
R
1
V
1
2
-
V
out
+
V
R
1
Our Application Engineering Department is available to
advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us. contact us using the e-mail address in the
footer below.
SMN
R
2
Table 1—Resistance Values and Tolerances
(Tighter performances are available)
*
This datasheet provides information about parts that are
RoHS-compliant andꢀor parts that are non-RoHS-compliant.
For example, parts with lead (Pb) terminations are not RoHS
compliant. Please see the informationꢀtables in this datasheet
for details.
Resistance Values
100 Ω–10 kΩ per resistor
0.02%, 0.05%, 0.1%
0.01%, 0.02%, 0.05%
Absolute Tolerance Each Resistor
Resistance Tolerance Match
4134-EN
Rev 22-Oct-2020
For any questions, contact
foil@vpgsensors.com
www.vishayfoilresistors.com
1
SMN
Figure 1—Schematics(1)
Figure 4—Typical TCR Curve
(for more details, see Table 2)
8
7
6
5
8
7
6
5
+150
+100
+50
0
R1 R1 R1 R1
R1 R2 R2 R1
1
2
3
4
1
2
3
4
–50
OPTION 1
OPTION 2
–100
FOUR RESISTORS,
SAME OHMIC VALUE
TWO RESISTOR PAIRS
R1/R2; R2/R1
–150
2 ppmꢀ°C (+25°C reference)
SAME ABSOLUTE TOLERANCE
–200
–50
–55
–25
0
+20
+50
+75
+100
+125
(1) Different schematics are available (R1, R2, R3, R4).
Ambient Temperature (°C)
Figure 2—Power Derating Curve
Figure 5—Trimming to Values
(conceptual illustration)
110
100
90
80
70
60
50
40
30
20
10
0
Interloop
capacitance
reduction
in series
Current path
before trimming
Mutual
Current path after trimming
Trimming process
inductance
reduction
due to change
in current
direction
removes this material
from shorting strip area
changing current path
and increasing
resistance
- 60 - 40 - 20
55
0
20
40
60
80 100 120 140
125
70
Foil shown in black, etched spaces in white
Ambient Temperature (°C)
Note
®
To acquire a precision resistance value, the Bulk Metal Foil
chip is trimmed by selectively removing built-in “shorting bars.”
To increase the resistance in known increments, marked
areas are cut, producing progressively smaller increases in
resistance. This method reduces the effect of “hot spots” and
improves the long-term stability of Bulk Metal Foil resistors.
Figure 3—Dimensions and Imprinting
Example in inches (millimeters)
0.008 0.001
(0.20 0.025)
RATIO
TOLERANCE CODE
0.0165 0.0025
0.050
(1.27)
(0.42 0.064)
Figure 6—Land Pattern in inches (millimeters)
VALUE R1
VALUE R2
0.028 0.001
(0.71 0.025)
0.283 (7.19)
Z
SMN
+0.008 (0.2)
1
(1)
10K Q 5K0
0
(
D
V
B0219
DATE
0.024 (0.61)
X
CODE
PIN NO. 1 IDENTIFIER
PIN NO. 1
+0.008 (0.2)
0.197 0.005
(5.00 0.13)
2° - 6°
Z
0.095 (2.41)
0.008 (0.2)
Y
E
D
0.068 0.005
(1.73 0.13)
0.0075 0.0025
(0.191 0.064)
Y
Seating
Plane
0.050 (1.27)
nominal
(1)
If the resistance value of R1 and R2 contains more than
6 characters together, the VCODE will be printed instead
(see Resistance Value Code List for Popular Ratios Table)
followed by the ratio tolerance code
E
X
0.150 (3.81)
nominal
www.vishayfoilresistors.com
2
For any questions, contact
foil@vpgsensors.com
4134-EN
Rev 22-Oct-2020
SMN
Table 2—Performance Specifications (per MIL-PRF 914 Test Methods)
Specifications
Typical Limits
Each resistor: 0.1 W
Entire package: 0.4 W
Power rating at + 70 °C
½
Maximum working voltage (each resistor)
(P x R)
Absolute (typical and max. spread):
Tracking (maximum):
For R1ꢀR2 = 1
2
3 ppmꢀ°C
TCR
1.0 ppmꢀ°C
2.0 ppmꢀ°C
3.0 ppmꢀ°C
–55°C to +125°C (25°C reference)
For 1 <R1ꢀR2 ≤10
For 10 <R1ꢀR2 ≤100
Thermal shock
25 x (–65°C to +125°C)
∆R = 0.01% (100 ppm)
∆R = 0.01% (100 ppm)
Thermal shock 5 x (–65°C to +125°C) and
Power conditioning 1.5 rated power at 25 °C, 100 hours
∆R = 0.02% (200 ppm)
∆Ratio = 0.015% (150 ppm)
DWV atm. pressure
Successfully passed
>104 MΩ
200 V (A.C), 1 minute
Insulation resistance
100 V (D.C), 1 minute
∆R = 0.01% (100 ppm)
∆Ratio = 0.005% (50 ppm)
Resistance to soldering heat
Moisture resistance
+65°C to –10°C; 90% to 98% RH; 0.1 x rated power; 240 hours
∆R = 0.02% (200 ppm)
∆Ratio = 0.005% (50 ppm)
Shock (specified pulse)
100 G
∆R = 0.01% (100 ppm)
∆Ratio = 0.01% (100 ppm)
Vibration, high frequency
(10 Hz–2000 Hz), 20 G
∆R = 0.005% (50 ppm)
∆Ratio = 0.005% (50 ppm)
High temperature exposure
100 hours at 125°C
∆R = 0.01% (100 ppm)
∆Ratio = 0.005% (50 ppm)
Low temperature storage
24 hours at –65°C
∆R = 0.005% (50 ppm)
∆Ratio = 0.005% (50 ppm)
Load life stability
at 70°C; 0.1 W per resistor, 2000 hours
∆R = 0.005% (50 ppm)
∆Ratio = 0.005% (50 ppm)
Short time overload
6.25 x rated power; 5 seconds
∆R = 0.005% (50 ppm)
∆Ratio = 0.0025% (25 ppm)
Weight
0.08 g
4134-EN
Rev 22-Oct-2020
For any questions, contact
foil@vpgsensors.com
www.vishayfoilresistors.com
3
SMN
Table 3—Part Number Information(1)
NEW GLOBAL PART NUMBER: Y1365V0204QT9W (preferred part number format)
DENOTES PRECISION
VCODE
TOLERANCE MATCH
PACKAGING
R = Tape and Reel
W = Waffle Pack
U = ESD Tubes
Y
RESISTANCE
T = 0.01%
Q = 0.02%
A = 0.05%
VALUE CODE
Y
1
3
6
5
V
0
2
0
4
Q
T
9
W
PRODUCT CODE
SMN = 1365
ABSOLUTE TOLERANCE
AER*
Q = 0.02%
A = 0.05%
B = 0.1%
0 = Standard
9 = Lead (Pb)-free
1 - 999 = Custom
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1365 V0204 Q T 9 W:
TYPE: SMN
VALUES: 10K/500R
ABSOLUTE TOLERANCE: 0.02%
TOLERANCE MATCH: 0.01%
TERMINATION: Lead (Pb)-free
PACKAGING: Waffle Pack
HISTORICAL PART NUMBER: SMN 10K/500R TCR2 Q T S W (will continue to be used)
SMN
10K/500R
TCR2
Q
T
S
W
RESISTANCE
ABSOLUTE
TOLERANCE
MODEL
ABSOLUTE TCR
TERMINATION
PACKAGING
VALUE
TOLERANCE
MATCH
T = Tape and reel
W = Waffle pack
U = ESD tubes
SMN
R
1 = 10k
TCR2
Q = 0.02%
A = 0.05%
B = 0.1%
T = 0.01%
Q = 0.02%
A = 0.05%
S = Lead (Pb)-free
B = Tin/Lead
R2 = 500
(1)
For non-standard requests, please contact Application Engineering.
Table 4—Resistance Value Code List for Popular Ratios (other values available)
VCODES
R1/R2RATIO
R1
10K
10K
5K
R2
VCODES
R1/R2RATIO
R1
R2
V0201
100
100R
200R
100R
V0189
1K
400R
2.5
V0185
500R
200R
V0202
50
25
20
V0197
V0207
V0175
V0190
V0182
V0179
10K
2K
5K
10K
5K
400R
200R
V0203
V0198
1K
2
1K
500R
200R
100R
400R
200R
10K
2K
500R
100R
V0204
V0193
10K
2K
1K
V0186
1.25
500R
400R
V0205
V0194
V0187
200R
100R
10
V0178
V0180
V0183
V0023
V0191
V0176
V0019
V0008
100R
200R
400R
500R
1K
100R
200R
400R
500R
1K
1K
10K
2K
1K
V0200
V0195
V0188
V0184
400R
200R
100R
5
4
1
1K
500R
2K
2K
5K
5K
2K
500R
100R
V0196
V0181
10K
10K
400R
www.vishayfoilresistors.com
4
For any questions, contact
foil@vpgsensors.com
4134-EN
Rev 22-Oct-2020
Legal Disclaimer Notice
Vishay Precision Group, Inc.
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.
The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.
VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.
Copyright Vishay Precision Group, Inc., 2014. All rights reserved.
Document No.: 63999
Revision: 15-Jul-2014
www.vpgsensors.com
1
相关型号:
Y1365V0179AT9R
Array/Network Resistor, Isolated, Metal Foil, 0.4W, 0.05% +/-Tol, 2ppm/Cel, Surface Mount, DIP, ROHS COMPLIANT
VISHAY
Y1365V0179BT9R
Array/Network Resistor, Isolated, Metal Foil, 0.4W, 0.1% +/-Tol, 2ppm/Cel, Surface Mount, DIP, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明