Y14870R03000D0R [VISHAY]
RES 0.03 OHM 0.5% 1W 2512;型号: | Y14870R03000D0R |
厂家: | VISHAY |
描述: | RES 0.03 OHM 0.5% 1W 2512 |
文件: | 总8页 (文件大小:695K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CSM Series
Bulk Metal® Technology High Precision, Current Sensing,
BulkMetal®TechnologyHighPrecision,CurrentSensing,PowerSurfaceMount,MetalStripResistor
Power Surface Mount, Metal Strip Resistor
with Resistance Value from 1 mΩ, Rated Power up to 3 W
and TCR to 0 1ꢀ ppmꢁ/C Maꢂimum
FEATURES
• Temperature coefficient of resistance:
15 ppm/°C max. (–55°C to +125°C, +25°C ref.);
10 ppm/°C max. (–55°C to +125°C, +25°C ref.)
is available on request (see table 1)
• Power rating: 1 W to 3 W
• Resistance tolerance: 0.1%
• Resistance range: 1 mΩ to 200 mΩ
• Bulk Metal® Foil resistors are not restricted to standard
values, specific “as required” values can be supplied at
no extra cost or delivery (e.g., 2.3456 mΩ vs. 2 mΩ)
• Load life stability to 0.2% (70°C, 2000 h
at rated power)
• Short time overload: 0.1% typical
• Thermal EMF: 3 µV/°C (DC offset error, significant
for low values)
INTRODUCTION
No minimum order quantity and any value at any
tolerance available within resistance range.
The Vishay Foil Resistors (VFR) application engineering
department is available to advise and make
recommendations.
For non-standard technical requirements and special
applications, please contact: foil@vpgsensors.com.
• Maximum current: up to 54 A
• Proprietary processing techniques produce low TCR,
tight tolerance and improve stability
• Low inductance <5 nH
B
C
R
I
I
• Solderable terminations
• Excellent frequency response to 50 MHz
A
D
• Screening in accordance with EEE-INST002
available (per MIL-PRF-ꢀꢀ342 and MIL-PRF-4946ꢀ;
see 303144 and 30314ꢀ datasheets)
V
~
Zin ∞
=
• Terminal finishes available: lead (Pb)-free, tin/lead alloy
• Quick prototype quantities available,
please contact: foil@vpgsensors.com
Four terminal (Kelvin) design: allows for precise and
accurate measurements.
• For better performance please contact:
application engineering
Figure 1 – Power Derating Curve
+70°C
100
80
60
40
20
0
–65 –50 –25
0
25
50
75
100 125 150 170
Ambient Temperature (°C)
Notes
*
This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example,
parts with lead (Pb) terminations are not RoHS compliant. Please see the information/tables in this datasheet for details.
4138-EN
Rev 11-Jan-2021
For any questions, contact
foil@vpgsensors.com
www.vishayfoilresistors.com
1
CSM Series
Table 1 – Specifications
PARAMETER
CSM2ꢀ12
CSM3637
Resistance Range
1 mΩ to 200 mΩ
3 W (1 mΩ to 10 mΩ)
2 W (>10 mΩ to 200 mΩ)
Power Rating at 70/C
Maꢂimum Current(2)
Tolerance
1 W(1)
31 A
54 A
0.5% (1 mΩ to <3 mΩ)
0.1% (3 mΩ to 200 mΩ)
0.5% (1 mΩ to <2 mΩ)
0.1% (2 mΩ to 200 mΩ)
50 ppm/°C (1 mΩ to <3 mΩ)
15 ppm/°C (3 mΩ to 200 mΩ)(3)
10 ppm/°C (3 mΩ to 10 mΩ)
is available on request(4)
25 ppm/°C (1 mΩ to <3 mΩ)
15 ppm/°C (3 mΩ to 200 mΩ)(3)
10 ppm/°C (1 mΩ to 10 mΩ)
is available on request(4)
Temperature Coefficient Maꢂ.
(–ꢀꢀ/C to +12ꢀ/C, +2ꢀ/C Ref.)
Operating Temperature Range
Maꢂimum Working Voltage
Weight (Maꢂimum)
–65°C to +170°C
(P×R)1/2
0.09 g
0.29 g
Notes
(1)
For values above 0.1 Ω derate linearly to 80% rated power at 0.5 Ω
Maximum current for a given resistance value is calculated using I = P/R
Loose TCR is available on request: 35ppm/C (3mΩ to 200mΩ)
Please contact application engineering: foil@vpgsensors.com
(2)
(3)
(4)
ABOUT CSM (Low Ohm Value 1 mΩ to 200 mΩ)
New high-precision Bulk Metal® surface-mount Power
Metal Strip® resistor of 1 mΩ to 200 mΩ that features
an improved load-life stability of 0.2% at +70°C for
2000 h at rated power, an absolute TCR of 15 ppm/°C
maximum from –55°C to +125°C, +25°C ref., and a
tolerance of 0.1%.
The device features a low thermal electromotive force
(EMF) that is critical in many precision applications.
The CSM’s all-welded construction is composed of a Bulk
Metal® resistive element with welded copper terminations,
plated for soldering. The terminations make true ohmic
contact with the resistive layer along the entire side of
the resistive element, thereby minimizing temperature
variations. Also, the resistor element is designed to
uniformly dissipate power without creating hot spots, and
the welded terminations material is compatible with the
element material.
Typical current sensing resistors offer a load-life stability
of ≥ 1% through a 2000 h workload. The improved
resistance stability of the CSM Series makes it ideal for
tightened-stability voltage division and precision current
sensing applications in switching linear power supplies,
power amplifiers, measurement instrumentation, bridge
networks, and medical and test equipment. In addition,
the CSM Series complies with EEE-INST-002
These design factors result in a very low thermal-
EMF (3 µV/°C) resistor, because in addition to the low
thermal EMF compatibility of the metals, the uniformity
and thermal efficiency of the design minimizes the
temperature differential across the resistor, thereby
assuring low thermal EMF generation at the leads. This
further reduces the “battery effect” exhibited by most
current-sensing or voltage-reference resistors. Thus,
the parasitic voltage generated at the junction of two
dissimilar metals, which is especially important in low-
value current-sensing resistors, is minimized, while the
pure current-to-voltage conversion is protected from such
interference in DC applications.
(MIL-PRF 55342 and MIL-PRF 49465) for military and
space applications.
Traditional Passive current sensors and shunts generate
heat under power, which changes their resistance,
and thus their voltage output. The CSM’s low absolute
TCR reduces errors due to temperature gradients,
thus reducing a major source of uncertainty in current
measurement. The CSM can withstand unconventional
environmental conditions, including the extremely high
temperatures and radiation-rich environments of down-
hole oil exploration and well logging, or the deep-sea
underwater repeaters in cross-ocean communications.
The stability problems associated with analog circuits
are very pervasive, but knowledgeable selection of
a few high-quality resistors, networks, or trimming
potentiometers
The stability of the CSM can be further enhanced by
post-manufacturing operations (PMO), such as
temperature cycling, short-time overload, and
accelerated load life which are uniquely applicable to
Bulk Metal® Foil resistors.
in critical locations can greatly improve circuit
performance, long-term application-related performance,
as well as the designer’s peace-of-mind.
Notes
*
This datasheet provides information about parts that are ROHS-compliant and/or parts that are non-ROHS-compliant. For example ,
parts with lead (Pb) terminations. Please see the information /tables in this datasheet for details.
www.vishayfoilresistors.com
2
For any questions, contact
foil@vpgsensors.com
4138-EN
Rev 11-Jan-2021
CSM Series
Additionally, the overall system cost is often reduced
when a knowledgeable designer concentrates costs in
a few exceptionally stable components whose proven
minimal-deviation load and environmental stability can
often eliminate the necessity of additional compensating
circuitry or temperature-controlling systems. The higher
reliability and better overall system performances also
achieve excellent product results in the field, enhancing
market acceptance and product reputation.
The Key Applications
Applications requiring accuracy and repeatability under
stress conditions such as the following:
• Switching and linear power supplies
• Precision current-sensing
• Power management systems
• Feedback circuits
• Power amplifiers
Designers often unnecessarily pay for tighter tolerances
than required simply to accommodate the resistance
stability shifts they know to be imminent in an application
due to the large application-related changes in the
components they selected. Selection of a high-stability
component like the CSM in these applications eliminates
the need for shift allowance due to “planned instability”
and allows the use of looser initial tolerances than would
be necessary with current-sensing resistors based on
other technologies.
• Measurement instrumentation
• Precision instrumentation amplifiers
• Medical and automatic test equipment
• Satellites and aerospace systems
• Commercial and Military avionics
• Test and measurement equipment
• Electronic scales
Figure 2 – Dimensions and Imprinting in inches (millimeters)
CSM3637 DIMENSIONS
CSM2512 DIMENSIONS
(1)
(1)
H
H
A
A
B
B
L
L
W
T
T
W
CSM3637 LAND PATTERN
I1
CSM2512 LAND PATTERN
E1
I1
E1
e
E2
E2
d
c
I2
c
I2
I
d
b
b
I
a
Kelvin Connection
I1, I2 - Current
E1, E2 - Sense
a
Dimensions – Tolerances ±±0±1± ꢀ±±02.ꢁ54) ±±0±1. ꢀ±±0(ꢂ15
MODEL RESISTANCE RANGE (mΩ)
L
W
H
T
A
B
1 to < 5
0.087 (2.210)
CSM2512
5 to < 7
7 to 200
1 to < 2
2 to 200
0.250 (6.350) 0.125 (3.175) 0.025 (0.635) 0.047 (1.194) 0.030 (0.762)* 0.032 (0.813)*
0.030 (0.762)
0.360 (9.144) 0.370 (9.398) 0.025 (0.635) 0.138 (3.505) 0.061 (1.55) 0.032 (0.813)
0.360 (9.144) 0.370 (9.398) 0.025 (0.635) 0.086 (2.184) 0.061 (1.549) 0.032 (0.813)
CSM3637
Land Pattern Dimensions – Tolerances ±±0±±( ꢀ±±0±ꢃꢄ5
MODEL
RANGE
a
b
c
d
e
I
0R001 to 0R0049
0R005 to 0R0069
0R007 to 0R2
0.120 (3.05)
0.083 (2.10)
0.065 (1.65)
0.168 (4.27)
0.116 (2.95)
0.145 (3.68)
0.145 (3.68)
0.145 (3.68)
0.390 (9.91)
0.390 (9.91)
0.045 (1.14)
0.045 (1.14)
0.045 (1.14)
0.021 (0.53)
0.021 (0.53)
0.021 (0.53)
0.055 (1.39)
0.050 (1.27)
0.125 (3.17)
0.160 (4.06)
0.074 (1.88)
0.178 (4.52)
CSM2512
0.055 (1.39)
0.055 (1.39)
0R001 to 0R0019
0R002 to 0R2
0.066 (1.68) 0.024 (0.610)
0.066 (1.68) 0.024 (0.610)
–
–
CSM3637
Note
(1) White dot indicates top side of part for mounting purposes
4138-EN
Rev 11-Jan-2021
For any questions, contact
foil@vpgsensors.com
www.vishayfoilresistors.com
3
CSM Series
Table 2 – CSM Series Performance Specifications
CSM2ꢀ12ꢁCSM3637
MIL-PRF-4946ꢀB
∆R LIMITS
TEST
CONDITIONS
TYPICAL ∆R LIMITS(1) MAXIMUM ∆R LIMITS (1)
–55°C to +150°C, 1000 cycles,
15 min at each extreme
Thermal Shock
Load Life Stability
Bias Humidity
(0.5%+0.0005R)
(1.0%+0.0005R)
(0.5%+0.0005R)
0.1%
0.2%
0.05%
0.3%
1.0%
0.2%
2000 h, 70°C at rated power
+85°C, 85% humidity
10% bias, 1000 h
5 x rated power for 5 s
(See note (3) from table 1)
Short Time Overload
(0.5%+0.0005R)
(1.0%+0.0005R)
(0.5%+0.0005R)
(0.5%+0.0005R)
0.1%
0.2%
0.3%
0.3%
0.1%
High Temperature
Eꢂposure
1000 h, 170°C
–55°C for 24 h
Low Temperature
Storage
0.05%
0.02%
MIL-STD-202, method 106,
0 power, 7a and 7b not required
Moisture Resistance
0.05%
Shock
100 g, 6 ms, 5 pulses
(10 Hz to 2000 Hz) 20 g
(0.1%+0.0005R)
(0.1%+0.0005R)
0.02%
0.02%
0.05%
0.05%
Vibration
Resistance to
Soldering Heat
10 s to 12 s at +260°C
MIL-STD-202
(0.25%+0.0005R)
95% coverage
0.05%
–
0.1%
–
Solderability
Note
(1)
Measurement error allowed for ΔR limits: 0.0005 Ω.
Figure ( – Load Life Results of CSM2.12
CSM2512 0R05
Load Life 2000HRS @ 1W @ +70C (15 units)
3000
2500
2000
1500
1000
500
0
0
500
1000
1500
2000
2500
-500
-1000
-1500
-2000
-2500
-3000
Time (Hours)
www.vishayfoilresistors.com
4
For any questions, contact
foil@vpgsensors.com
4138-EN
Rev 11-Jan-2021
CSM Series
Figure ꢁ – Thermal Shock Results of CSM(ꢄ(ꢃ and CSM2.12
Thermal Shock (– 55°C to +150°C) x 1000 Cycles
20 Units Each Type and Value
2000
1500
1000
500
0
–500
–1000
–1500
–2000
CSM3637 0R1
CSM3637 0R2
CSM2512 0R1
CSM2512 0R2
Type and Value
Figure . – Bias Humidity Results of CSM(ꢄ(ꢃ and CSM2.12
Bias Humidity 1000 Hrs @ +85°C @ 85% RH
10 Units Each Type and Value
1000
800
600
400
200
0
–200
–400
–600
–800
–1000
CSM3637 0R2
CSM3637 0R1
CSM2512 0R1
CSM2512 0R2
Type and Value
4138-EN
Rev 11-Jan-2021
For any questions, contact
foil@vpgsensors.com
www.vishayfoilresistors.com
5
CSM Series
Figure ꢄ – Pulse Test I
CSM3637 0R005 Test - 10 units
(5 Pulses of 5 sec @ 30 A, 10 sec @ 0 A)
Average Resistance Deviation: 696 ppm
STD = 305 ppm, Measurement Error = 0.0005R
35
30
25
20
15
10
5
0
10 sec
5 sec
Time (sec)
Figure ꢃ – Pulse Test II
CSM3637 0R005 Pulse Test - 10 units
(35 Pulses of 0.2 msec @ 20 A, 0.5 msec @ 3 A)
Average Resistance Deviation: 13.3 ppm
STD = 27.3 ppm, Measurement Error = 0.0005R
25
20
15
10
5
0
0.5
0.2
Time (msec)
msec
msec
www.vishayfoilresistors.com
6
For any questions, contact
foil@vpgsensors.com
4138-EN
Rev 11-Jan-2021
CSM Series
Table ( – Global Part Number Informationꢀ15
NEW GLOBAL PART NUMBER: Y14870R12400B0R (preferred part number format)
DENOTES PRECISION
VALUE
CHARACTERISTICS
Y
R = Ω
0 = standard
9 = lead (Pb)-free
1 to 999 = custom
80 =Loose TCR Tin lead
89 =Loose TCR Lead (Pb)-free
Y
1
4
8
7
0
R
1
2
4
0
0
B
0
R
PRODUCT CODE
RESISTANCE TOLERANCE
PACKAGING
1487 = CSM2512
1488 = CSM3637
B = ꢀ01%
C = ꢀ025%
D = ꢀ05%
F = 10ꢀ%
W = waffle
R = tape and reel
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1487 ꢀR124ꢀꢀ B ꢀ R:
TYPE: CSM2512
VALUE: 1240ꢀ mΩ
ABSOLUTE TOLERANCE: ꢀ01%
TERMINATION: standard tin/lead
PACKAGING: tape and reel
HISTORICAL PART NUMBER: CSM2512 0R1240 B B T (will continue to be used)
CSM2512
0R1240
B
B
T
MODEL
OHMIC VALUE
ꢀ0124 Ω
ABS0 TOLERANCE
TERMINATION
PACKAGING
B = ꢀ01%
C = ꢀ025%
D = ꢀ05%
F = 10ꢀ%
S = lead (Pb)-free
B = tin/lead
T = tape and reel
W = waffle pack
Note
(1)
For non-standard requests, please contact application engineering.
4138-EN
Rev 11-Jan-2021
For any questions, contact
foil@vpgsensors.com
www.vishayfoilresistors.com
7
Legal Disclaimer Notice
Vishay Precision Group, Inc.
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.
The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.
VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.
Copyright Vishay Precision Group, Inc., 2014. All rights reserved.
Document No.: 63999
Revision: 15-Jul-2014
www.vpgsensors.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明