Y1636137R000Q9W [VISHAY]

RESISTOR, METAL FOIL, 0.1 W, 0.02 %, 0.2 ppm, 137 ohm, SURFACE MOUNT, 0603, CHIP, ROHS COMPLIANT;


型号：	Y1636137R000Q9W
厂家：	VISHAY
描述：	RESISTOR, METAL FOIL, 0.1 W, 0.02 %, 0.2 ppm, 137 ohm, SURFACE MOUNT, 0603, CHIP, ROHS COMPLIANT 电阻器
文件：	总5页 (文件大小：845K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

VSMP Series (0603, 0805, 1206, 1506, 2010, 2018, 2512) (Z-Foil)

Vishay Foil Resistors

Ultra High Precision Foil Wraparound Surface Mount Chip Resistor

with TCR of ± 0.05 ppm/°C and Power Coefficient of 5 ppm at

Rated Power and Load Life Stability of ± 0.005 % (50 ppm)

FEATURES

 Temperature coefficient of resistance (TCR):

0.05 ppm/°C typical (0 °C to + 60 °C)

0.2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C ref.)

 Resistance tolerance: to ± 0.01 %

 Power coefficient “R due to self heating”:

5 ppm at rated power

 Power rating: to 750 mW at + 70 °C (see table 3)

 Load life stability: to ± 0.005 % at 70 °C, 2000 h at rated

power

Top View

(for date code print specification please refer to table 2)

 Resistance range: 5  to 125 k (for lower or higher

values, please contact us)

INTRODUCTION

 Vishay Foil resistors are not restricted to standard values,

we can supply specific “as required” values at no extra cost

or delivery (e.g. 1K2345 vs. 1K)

 Thermal stabilization time < 1 s 

(nominal value achieved within 10 ppm of steady state

value)

 Electrostatic discharge (ESD) at least to 25 kV

 Short time overload:  0.005 %

 Non inductive, non capacitive design

 Rise time: 1 ns effectively no ringing

 Current noise: 0.010 µV_RMS/V of applied voltage

(< - 40 dB)

 Voltage coefficient < 0.1 ppm/V

 Non inductive: < 0.08 µH

 Non hot spot design

 Terminal finishes available: lead (Pb)-free, tin/lead alloy

 Matched sets are available on request

 Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

VSMP Series is the industry’s first device to provide high

rated power and excellent load life stability along with

extremely low TCR — all in one resistor.

One of the most important parameters influencing stability is

the Temperature Coefficient of Resistance (TCR). Although

the TCR of foil resistors is considered extremely low, this

characteristic has been further refined over the years. The

VSMP Series utilizes ultra high precision Bulk Metal^®Z-Foil.

The Z-Foil technology provides a significant reduction of the

resistive element’s sensitivity to ambient temperature

variations (TCR) and to self heating when power is applied

(Power Coefficient of Resistance, or PCR). Along with the

inherently low PCR and TCR, Z-Foil technology also

provides remarkably improved load life stability, low noise

and tight tolerances.

The VSMP resistor has a full wraparound termination which

assures secure contact during the manufacturing process,

as well as providing stability during multiple thermal cyclings.

Vishay Foil Resistors' (VFR) application engineering

department is available to advise and make

recommendations. For non-standard technical requirements

and special applications, please contact VFR using the

e-mail address in the footer below.

TABLE 1 - TOLERANCE AND TCR VS.

RESISTANCE VALUE ^(1)

FIGURE 1 - POWER DERATING CURVE

+ 70 °C

- 55 °C

(- 55 °C to + 125 °C, + 25 °C Ref.)

100

RESISTANCE

VALUE

TYPICAL TCR AND

MAX. SPREAD

(ppm/°C)

TOLERANCE

(%)

()

250to 125K

100to < 250

50to < 100

25to < 50

10to < 25

5 to < 10

± 0.01

± 0.02

± 0.05

± 0.1

± 0.2 ± 1.8

± 0.2 ± 2.8

± 0.2 ± 3.8

± 0.2 ± 7.8

- 75 - 50 - 25

+ 25 + 50 + 75 + 100 + 125 + 150 + 175

Ambient Temperature (°C)

± 0.25

± 0.5

* Pb containing terminations are not RoHS compliant; exemptions

may apply

Note

(1)

For tighter performances and non-standard values lower than

5  and above 125K, please contact VFR’s application

engineering using the e-mail addresses in the footer below

Document Number: 63060

Revision: 29-Oct-2012

For any questions, contact: foil@vishaypg.com

www.vishayfoilresistors.com

VSMP Series (0603, 0805, 1206, 1506, 2010, 2018, 2512) (Z-Foil)

Vishay Foil Resistors

FIGURE 2 - TRIMMING TO VALUES 

FIGURE 3 - TYPICAL RESISTANCE/

TEMPERATURE CURVE

(Conceptual Illustration)

+ 400

+ 300

+ 200

+ 100

ΔR

Current Path

Before Trimming

Interloop Capacitance

Reduction in Series

- 100

- 200

- 300

- 400

- 500

(ppm)

0.05 ppm/°C

- 0.1 ppm/°C 0.1 ppm/°C

0.14 ppm/°C

Current Path

After Trimming

Trimming Process

Mutual Inductance

Reduction due

to Change in

- 0.16 ppm/°C

0.2 ppm/°C

Removes this Material

from Shorting Strip Area

Changing Current Path

and Increasing

Current Direction

- 55

- 25

+ 25

+ 60 + 75 + 100 + 125

Ambient Temperature (°C) and TCR Chord Slopes for

Resistance

Different Temperature Ranges

Note

Note: Foil shown in black, etched spaces in white

• The TCR values for < 100  are influenced by the termination

composition and result in deviation from this curve

TABLE 2 - DIMENSIONS AND LAND PATTERN in Inches (Millimeters)

Top View

Recommended Land Pattern

Date Code

(Year/Week)

Footprint

CHIP

SIZE

THICKNESS

MAXIMUM

Z ⁽¹⁾

G ⁽¹⁾

X ⁽¹⁾

± 0.005 (0.13)

0603

0805

1206

1506

2010

2018

2512

0.063 (1.60)

0.080 (2.03)

0.126 (3.20)

0.150 (3.81)

0.198 (5.03)

0.204 (5.18)

0.249 (6.32)

0.032 (0.81)

0.050 (1.27)

0.062 (1.57)

0.097 (2.46)

0.184 (4.67)

0.127 (3.23)

0.025 (0.64)

0.011 (0.28)

0.015 (0.38)

0.020 (0.51)

0.025 (0.64)

0.018 (0.46)

0.032 (0.81)

0.102 (2.59)

0.122 (3.10)

0.175 (4.45)

0.199 (5.05)

0.247 (6.27)

0.248 (6.3)

0.291 (7.39)

0.031 (0.78)

0.028 (0.71)

0.059 (1.50)

0.083 (2.11)

0.115 (2.92)

0.146 (3.71)

0.150 (3.81)

0.031(0.78)

0.050 (1.27)

0.071 (1.80)

0.103 (2.62)

0.184 (4.67)

0.127 (3.23)

Note

(1)

(2)

Land Pattern Dimensions are per IPC-7351A

The date code printing applies to all resistor sizes except for 0603

TABLE 3 - SPECIFICATIONS

TABLE 4 - LOAD LIFE STABILITY

(+ 70 °C for 2000 h)

RATED

POWER

(mW)

MAX.

WORKING

VOLTAGE

RESISTANCE MAXIMUM

CHIP

CHIP SIZE

MAXIMUM R LIMITS

RANGE

WEIGHT

(mg)

SIZE

± 0.005 % at 50 mW

()*

0603

at + 70 °C ( P  R )

± 0.01 % at 100 mW

0603

0805

1206

1506

2010

2018

2512

100

200

300

500

750

20 V

40 V

100 to 4K

5to 8K

± 0.005 % at 100 mW

0805

± 0.01 % at 200 mW

± 0.005 % at 150 mW

87 V

5to 25K

5to 30K

5to 70K

5to 20K

5to 125K

1206, 1506

2010

± 0.01 % at 300 mW

95 V

± 0.005 % at 200 mW

187 V

122 V

220 V

± 0.01 % at 500 mW

± 0.005 % at 500 mW

2018

± 0.01 % at 750 mW

± 0.005 % at 500 mW

2512

* For non standard values please contact VFR’s application

engineering using the e-mail addresses in the footer below.

± 0.01 % at 750 mW

www.vishayfoilresistors.com

For any questions, contact: foil@vishaypg.com

Document Number: 63060

Revision: 29-Oct-2012

VSMP Series (0603, 0805, 1206, 1506, 2010, 2018, 2512) (Z-Foil)

Vishay Foil Resistors

TABLE 5 - PERFORMANCES

MIL-PRF-55342

CHARACTERISTIC E R LIMITS

TYPICAL

R LIMITS

MAXIMUM

TEST OR CONDITIONS

R LIMITS ⁽¹⁾

Thermal Shock, 100 x (- 65 °C to + 150 °C)

Low Temperature Operation, - 65 °C, 45 min at P_nom

Short Time Overload, 6.25 x Rated Power, 5 s

High Temperature Exposure, + 150 °C, 100 h

Resistance to Soldering Heat

± 0.1 %

± 0.2 %

± 0.5 %

± 0.005 % (50 ppm)

± 0.01 % (100 ppm)

± 0.005 % (50 ppm)

± 0.01 % (100 ppm)

± 0.02 % (200 ppm)

± 0.01 % (100 ppm)

± 0.02 % (200 ppm)

± 0.01 % (100 ppm)

Moisture Resistance

Load Life Stability + 70 °C for 2000 h at Rated Power

Note

(1)

As shown + 0.01  to allow for measurement errors at low values

FIGURE 4 - RECOMMENDED MOUNTING

Notes

⁽¹⁾IR and vapor phase reflow are recommended.

(2)

Avoid the use of cleaning agents which could attack epoxy resins, which form part

of the resistor construction

Vacuum pick up is recommended for handling

⁽⁴⁾If the use of a soldering iron becomes necessary, precautionary measures should

be taken to avoid any possible damage / overheating of the resistor

(3)

Recommendation: The solder fillet profile should be such as to avoid running over

the top metallization

FIGURE 5 - VSMP0603 100 CYCLE

THERMAL SHOCK - 65 °C TO

150 °C, 10 UNITS EACH VALUE

FIGURE 6 - LOAD LIFE TEST FOR

10,000 HRS @0.3W, +70°C;

VSMP 1206, N=40

100

500

400

300

200

100

10R

(ppm)

1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

-100

-200

-300

-400

-500

12K

- 20

- 40

VSMP0603

100R

VSMP0603

Time (hrs)

CRYOGENIC TEST

Different expansion/contraction rates of composite materials

in resistors may induce discontinuities during temperature

excursions that are not evident at temperature extremes,

making an unreliable resistor appear normal. A good resistor

must also return to its initial value with no resistance drift. In

this demo, a VFR VSMP0805 precision resistor is monitored

through the range of +25°C, down to -196°C and back up to

+25°C. Results confirm the VSMP0805 exhibits only 5

ppm/°C TCR, experiences no discontinuities, and returns to

its exact same starting value, showing absolutely no change

in resistance (< 1 ppm measurement accuracy).

FIGURE 7 - PRECISION RESISTOR IN

CRYOGENIC CONDITIONS -

ONLY 5 PPM/°C

(PRODUCT DEMO)

Document Number: 63060

Revision: 29-Oct-2012

For any questions, contact: foil@vishaypg.com

www.vishayfoilresistors.com

VSMP Series (0603, 0805, 1206, 1506, 2010, 2018, 2512) (Z-Foil)

Vishay Foil Resistors

Catastrophic Damage - occurs when the ESD event causes

PULSE TEST

the device to immediately stop functioning. This may occur

after one or a number of ESD events with diverse causes,

such as human body discharge or the mere presence of an

electrostatic field.

TEST DESCRIPTION

All parts are baked at +125°C for 1 hour and allowed to cool

at room temperature for 1 hour, prior to testing. By using an

electrolytic 0.01µF capacitor charged to 1200 VDC, a single

pulse was performed on 30 units of 1206, 10 k of Surface

Mount Vishay Foil resistor and Thin Film resistor. The units

were allowed time to cool down, after which the resistance

measurements were taken and displayed in ppm deviation

from the initial reading.

Latent Damage - occurs when the ESD event causes

moderate damage to the device, which is not noticeable, as

the device appears to be functioning correctly. However, the

load life of the device has been dramatically reduced, and

further degradation caused by operating stresses may cause

the device to fail during service. Latent damage is the source

for greatest concern, since it is very difficult to detect by

re-measurement or by visual inspection, because damage

may have occurred under the external coating.

TEST RESULTS

FIGURE 8 - PULSE TEST DESCRIPTION

TEST DESCRIPTION

By using an electrolytic 500 pF capacitor charged up to 4500

V, pulses were performed on 10 units of 1206, 10 k of three

different Surface Mount Chip Resistors technologies, with an

initial voltage spike of 2500 V (Figure 10). The units were

allowed time to cool down, after which the resistance

measurements were taken and displayed in ppm deviation

from the initial readings. Readings were then taken in 500 V

increments up to 4500 V.

ꢀ2!!

#$ꢁ

!ꢂ!ꢀ+/

FIGURE 10 - ESD TEST DESCRIPTION

FIGURE 9 - PULSE TEST RESULTS AT

1200 VDC*

2500 V to 4500 V

1 MΩ

140000

120000

100000

Thin Film

80000

60000

40000

20000

Bulk Metal^®Foil

500 pF

Size: 1206

Value: 10K

n = 30

-20000

Resistor #

Note: Average of 30 units yielded deviation of 30 723 ppm of the Thin Film vs –14 ppm for the Bulk Metal^®Foil

DMM

* Note: Average of 30 units yielded deviation of 30,723 ppm of the

Thin Film vs. -14 ppm for the Bulk Metal^®Foil

TABLE 6 - ESD TEST RESULTS 

ELECTROSTATIC DISCHARGE (ESD)

(AVERAGE OF 10 UNITS)

ESD can be categorized into three types of damages:

∆R (%)

VOLTS

THICK FILM

-2.7

THIN FILM

FOIL

Parametric Failure - occurs when the ESD event alters one

or more device parameters (resistance in the case of

resistors), causing it to shift from its required tolerance. This

failure does not directly pertain to functionality; thus a

parametric failure may be present while the device is still

functional.

2500

3000

3500

4000

4500

<0.005

-4.2

366

-6.2

OPEN

-7.4

-8.6

www.vishayfoilresistors.com

For any questions, contact: foil@vishaypg.com

Document Number: 63060

Revision: 29-Oct-2012

VSMP Series (0603, 0805, 1206, 1506, 2010, 2018, 2512) (Z-Foil)

Vishay Foil Resistors

TABLE 7- GLOBAL PART NUMBER INFORMATION ⁽¹⁾

NEW GLOBAL PART NUMBER: Y162612K7560T9R (preferred part number format)

DENOTES PRECISION

VALUE

CHARACTERISTICS

R = 

K = k

0 = standard

9 = lead (Pb)-free

1 to 999 = custom

PRODUCT CODE

RESISTANCE TOLERANCE

PACKAGING

1636 = VSMP0603

1624 = VSMP0805

1625 = VSMP1206

1626 = VSMP1506

1627 = VSMP2010

1637 = VSMP2018

1628 = VSMP2512

T = ± 0.01 %

Q = ± 0.02 %

A = ± 0.05 %

B = ± 0.10 %

C = ± 0.25 %

D = ± 0.5 %

F = ± 1.0 %

R = tape and reel

W = waffle pack

FOR EXAMPLE: ABOVE GLOBAL ORDER Y1626 12K7560 T 9 R:

TYPE: VSMP1506

VALUES: 12.7560 k

ABSOLUTE TOLERANCE: 0.01 %

TERMINATION: lead (Pb)-free

PACKAGING: tape and reel

HISTORICAL PART NUMBER: VSMP1506 12K756 TCR0.2 T S T (will continue to be used)

VSMP1506

12K756

TCR0.2

RESISTANCE

VALUE

TCR

MODEL

TOLERANCE

TERMINATION

PACKAGING

CHARACTERISTICS

T = tape and reel

W = waffle pack

VSMP0603

VSMP0805

VSMP1206

VSMP1506

VSMP2010

VSMP2018

VSMP2512

12.756 k

T = ± 0.01 %

Q = ± 0.02 %

A = ± 0.05 %

B = ± 0.10 %

C = ± 0.25 %

D = ± 0.5 %

F = ± 1.0 %

S = lead (Pb)-free

B = tin/lead

Note

⁽¹⁾For non-standard requests, please contact application engineering.

PRECISION CENTER

Precision centers are located around the world to provide local, short run, quick delivery of Vishay Bulk Metal^®Foil resistors.

Unique to Vishay Foil Resistors (VFR) is the ability to provide any value to any tolerance. The precision centers can ship small

quantities in five days or less.

Why do we have authorized local manufacturing or precision centers?

Because we have no standard values and each resistor is trimmed to the precise value ordered. The unique chain of Precision

Centers brings these precise values as close as possible to the circuit designers in the shortest time possible.

For your local Precision Center please click here.

Document Number: 63060

Revision: 29-Oct-2012

For any questions, contact: foil@vishaypg.com

www.vishayfoilresistors.com

Y1636137R000Q9W [VISHAY]

相关型号：

Y1636138R000Q9W

Y1636142R000Q9W

Y1636145R000Q0R

Y1636145R000Q9R

Y1636147R000Q9W

Y1636149R000Q9R

Y1636149R000Q9W

Y1636150R000A9R

Y1636150R000Q0R

Y1636150R000Q9R

Y1636150R000Q9W

Y1636152R000Q9R