Y1758120M500D [VISHAY]
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and; 密封的超高精度Z箔电阻技术为± 0.2 ppm的TCR / ℃, ± 0.001 %的容差和型号: | Y1758120M500D |
厂家: | VISHAY |
描述: | Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and |
文件: | 总5页 (文件大小:133K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HZ Series (Z-Foil)
Vishay Foil Resistors
Hermetically Sealed Ultra High Precision Z-Foil Technology
Resistors with TCR of ꢀ0. ꢁꢁmꢂ/C, Tolerance of ꢀ0ꢀꢀꢃ ꢄ and
Load Life Stability of ꢀ0ꢀꢀꢅ ꢄ
FEATURES
• Temꢁerature coefficient of resistance (TCR):
0.2 ppm/°C typical (- 55 °C to + 125 °C,
+ 25 °C ref.)
• Power coefficient “ΔR due to self heating”:
5 ppm at rated power
• Tolerance: to 0.001 ꢀ
Any value available within resistance range
• Load life stability
0.002 ꢀ maximum ΔR (60 °C for
2000 h at 0.1 W per chip)
INTRODUCTION
• Electrostatic discharge (ESD) > 25 000 V
The Z-foil based oil filled, hermetically sealed HZ-series
resistors represent an industry breakthrough. The hermetic
sealing eliminates the ingress of moisture and oxygen, while
the oil acts as a thermal conductor, thus eliminating long term
degradation elements of unsealed resistors, while at the
same time allowing the device to accept short periods of
overload without degradation.
• Resistance range: 5 Ω to 1.1 MΩ (higher or lower values of
resistance available)
• Power rating: 0.3 to 2.5 W at + 25 °C (depending on model
- see table 2)
• Shelf life stability: 2 ppm for at least 10 years
• Non inductive, non capacitive design
• Non hot spot design
The Z-foil technology provides a significant reduction of the
resistive components sensitivity to ambient temperature
variations (TCR) and applied power changes (PCR). When
combined with the hermetic sealing and oil filling, the
H-series resistors become the most ꢁrecise and stable
resistors available.
• Rise time: 1.0 ns without ringing
• Current noise: < - 40 dB
• Thermal EMF: 0.05 µV/°C typical
• Voltage coefficient: < 0.1 ppm/V
• Non inductive: < 0.08 µH
With accuracies of 0.001 ꢀ and a resistance range from
5 Ω to 1.1 MΩ and long term shelf life of less than 2 ppm,
these devices are virtually secondary standards that can be
carried in sets for daily or periodic calibration of factory
measurement equipment.
• Terminal finishes available: lead (Pb)-free
tin/lead alloy
• Impervious to harmful environments - oil filled
• For better performances, please contact us
The VHA series is also available with laboratory and
metrology level ꢁrecision and long term stability with
additional in-house oriented ꢁrocess such as: sꢁecial
TCR ꢁlotting, mounted chiꢁ stabilization, thermal shock
and bake ꢁrior to sealing, combined thermal shock and
ꢁower conditioning on finished ꢁroduct, thermal and
ꢁower conditioning, comꢁonent linearity test0
FIGURE 1 - TRIMMING TO VALUES
(Conceptual Illustration)
TABLE 1 - TOLERANCE AND TCR VS.
RESISTANCE VALUE
Current Path
Before Trimming
Interloop Capacitance
Reduction in Series
TYPICAL TCR AND
RESISTANCE VALUE
MAX0 SPREAD
(- ꢅꢅ /C to + ꢃ.ꢅ /C, + .ꢅ /C ref0)
(ꢁꢁmꢂ/C)ꢃ)
Current Path
After Trimming
(Ω)
Mutual Inductance
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Reduction due
to Opposing
Current in
100 to < 1M1
50 to < 100
5 to < 50
0.2
0.2
0.2
2
3
4
Adjacent Lines
Resistance
Note: Foil shown in black, etched spaces in white
Note
1. For lower TCR and for selected TCR tracking, please contact us
Document Number: 63120
Revision: 17-Jun-08
For any questions, contact: foil@vishay.com
www.vishay.com
1
HZ Series (Z-Foil)
Hermetically Sealed Ultra High Precision Z-Foil
Technology Resistors with TCR of 0.2 ppm/°C, Tolerance
of 0.001 ꢀ and Load Life Stability of 0.005 ꢀ
Vishay Foil Resistors
TABLE 2 - MODEL SELECTION
STANDARD RESISTANCE
DIMENSIONS3)
INCHES
W: 0.185 0.020
RESISTANCE
RANGE
MAXIMUM POWER AVERAGE
TOLERANCE
MODEL
NUMBER
CONSTRUCTION
BRIEF
WORKING RATING
VOLTAGE.) at + .ꢅ /C
WEIGHT
(g)
TIGHTEST LOOSEST
(Ω)
mm
(
Ω
)
(ꢄ)
VHP202Z
VHP202ZJ
10 to 66k
66K to 100K
300
0.3 W
0.2 W
1.4
Oil-filled, tinned
4.70 0.51
copper leads, nickel L: 0.435 0.020
11.05 0.51
shell, kovar and
glass header
H: 0.430 0.020** 10.92 0.51
LL: 1.000 0.125 25.4 3.18
LS: 0.150 0.0104) 3.81 0.25
ST: 0.095 Max.
2.41 Max.
VHA412Z
VHA414Z
VHA512Z*
10 to 66K
66K to 100K
250
350
350
500
0.3 W
0.2 W
4.6
7.3
6.3
9.2
L: 0.625 0.031
D: 0.375 0.031
LL: 1.000 Min.
15.88 0.79
9.53 0.79
25.4 Min.
5 to 120K
> 120K to 200K
0.5 W
0.3 W
L: 1.000 0.031
D: 0.375 0.031
LL: 1.000 Min.
25.4 0.79
9.53 0.79
25.4 Min.
1)
1K to
0.001 0.1
0.0025 0.1
0.005 0.1
0.01 0.1
0.02 0.1
0.05 0.1
0.1 0.1
5 to 180K
180K to 300K
0.75 W
0.4 W
L: 0.625 0.031
D: 0.500 0.031
LL: 1.000 Min.
15.88 0.79
12.7 0.79
25.4 Min.
500 to < 1K
50 to < 500
30 to < 50
20 to < 30
10 to < 20
5 to < 10
VHA516-4Z* 5 to 240K
> 240K to 400K
VHA516-5Z* 5 to 300K
> 300K to 500K
VHA516-6Z* 5 to 360K
> 360K to 600K
VHA518-7Z* 5 to 420K
> 420K to 700K
VHA518-8Z* 5 to 480K
> 480K to 800K
VHA518-9Z* 5 to 540K
> 540K to 900K
VHA518-10Z* 5 to 600K
> 600K to 1.0M
VHA518-11Z* 5 to 660K
> 660K to 1.1M
1.0 W
0.5 W
1.25 W
0.6 W
1.5 W
0.7 W
L: 1.000 0.031
D: 0.500 0.031
LL: 1.000 Min.
25.4 0.79
12.7 0.79
25.4 Min.
Oil-filled,
tinned copper
leads, tinned brass
shell, kovar and
glass end bells
600
1.75 W
0.8 W
2.0 W
0.9 W
2.25 W
1.0 W
2.5 W
1.1 W
2.5 W
1.2 W
13.5
L: 1.500 0.031
D: 0.500 0.031
LL: 1.000 Min.
38.1 0.79
12.7 0.79
25.4 Min.
Notes
*
Available in a 4-lead terminal: VHA512 please use 302073Z
VHA516 please use 302074Z
VHA518 please use 302075Z
** 0.375 H available
See next page for numbered footnotes
FIGURE 2 - TYPICAL TCR CURVE Z-FOIL
FIGURE 3 - POWER DERATING CURVE
+ ꢅꢀꢀ
+ 4ꢀꢀ
+ 3ꢀꢀ
+ .ꢀꢀ
- 55 °C
+ 100
+ 75
+ 50
+ 25
0
+ ꢃꢀꢀ
∆R
R
ꢀ
- ꢃꢀꢀ
- .ꢀꢀ
- 3ꢀꢀ
- 4ꢀꢀ
- ꢅꢀꢀ
(ꢁꢁm)
ꢀ0ꢀꢅ ꢁꢁmꢂ/C
- ꢀ0ꢃ ꢁꢁmꢂ/C ꢀ0ꢃ ꢁꢁmꢂ/C
ꢀ0ꢃ4 ꢁꢁmꢂ/C
- ꢀ0ꢃ6 ꢁꢁmꢂ/C
ꢀ0. ꢁꢁmꢂ/C
- 50 - 25
0
+ 25 + 50 + 75 + 100 + 125 + 150 + 175
Ambient Temꢁerature (/C)
- ꢅꢅ
- .ꢅ
ꢀ
+ .ꢅ
+ 6ꢀ + 7ꢅ + ꢃꢀꢀ + ꢃ.ꢅ
Ambient Temꢁerature (/C)
www.vishay.com
2
For any questions, contact: foil@vishay.com
Document Number: 63120
Revision: 17-Jun-08
HZ Series (Z-Foil)
Hermetically Sealed Ultra High Precision Z-Foil
Technology Resistors with TCR of 0.2 ppm/°C, Tolerance
of 0.001 ꢀ and Load Life Stability of 0.005 ꢀ
Vishay Foil Resistors
FIGURE 4 - STANDARD IMPRINTING AND DIMENSIONS
Front View
Rear View
Lead Material #22 AWG
Round Solder Coated Copper
L
W
Resistance
Value Code
VISHAY
XXXX
D
VISHAY
XXXX
VHP202Z
100R01
0.01%
XXXX
Tolerance
H
Model
Number
Date Code
07 10
Serial No.
L
LL
Year Week
ST
Model No.
Date Code
LL
VHA412Z
07
06
100R01 0.005%
Year Week
Lead Material
Resistance
Value Code
Tolerance
#22 AWG Round
LS
Solder Coated Copper
TABLE 3 - “H” SERIES SPECIFICATIONS
Stability8)
Load life at 2000 h
Shelf life
0.002 ꢀ maximum ΔR at 0.1 W per chip and at + 60 °C
2 ppm (0.0002 ꢀ) after at least 10 years
Current Noise
High Frequency Oꢁeration
Rise time
< 0.010 µV (RMS)/V of applied voltage (- 40 dB)
1.0 ns without ringing
Inductance (L)5)
Capacitance (C)
Voltage Coefficient
0.1 µH maximum; 0.08 µH typical
1.0 pF maximum; 0.5 pF typical
< 0.1 ppm/V6)
Thermal EMF7)
Hermeticity
0.1 µV/°C maximum; 0.05 µV/°C typical; 1 µV/W maximum
10-7 atmospheric cc/s maximum
Notes
1. Upper end of resistance range varies with model selected (i.e. VHP202Z; the range is to 100 kΩ; VHA518-10Z, the range is to 1.0 MΩ) per
Table 2
2. Not to exceed power rating of resistor
3. Insulating sleeve - a special case insulating plastic sleeve is available on VHAZ models - specify letter “P” as a suffix to model number
(i.e. VHA412ZP)
4. 0.200" (5.08 mm) lead spacing available - specify VHP202ZJ
5. Inductance (L) due mainly to the leads
6. The resolution limit of existing test equipment (within measurement capability of the equipment, or “essentially zero”)
7. µV/° relates to EMF due to lead temperature difference and µV/watt due to power applied to the resistor
8. Load life ΔR max. can be reduced through in-house oriented processes
Document Number: 63120
Revision: 17-Jun-08
For any questions, contact: foil@vishay.com
www.vishay.com
3
HZ Series (Z-Foil)
Hermetically Sealed Ultra High Precision Z-Foil
Technology Resistors with TCR of 0.2 ppm/°C, Tolerance
of 0.001 ꢀ and Load Life Stability of 0.005 ꢀ
Vishay Foil Resistors
TABLE 4 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Yꢃ7ꢅꢀꢃ.ꢀKꢅꢀꢀV9L (ꢁreferred ꢁart number format)
DENOTES PRECISION
VALUE
AER*
Y
R = Ω
K = kΩ
M = MΩ
ꢀ = standard product, tin/lead termination
ꢃ = with plastic sleeve, tin/lead termination
9 = standard product, lead (Pb)-free termination
ꢃ9 = with plastic sleeve, lead (Pb)-free termination
Other = custom
Y
ꢃ
7
ꢅ
ꢀ
ꢃ
.
ꢀ
K
ꢅ
ꢀ
ꢀ
V
9
L
PRODUCT CODE
RESISTANCE TOLERANCE
PACKAGING
6ꢀ7ꢃ = VHP202Z
ꢃ748 = VHP202ZJ
ꢃ749 = VHA412Z
ꢃ7ꢅꢃ = VHA414Z
ꢃ7ꢅꢀ = VHA512Z
ꢃ7ꢅ. = VHA516-4Z
ꢃ7ꢅ3 = VHA516-5Z
ꢃ7ꢅ4 = VHA516-6Z
ꢃ7ꢅꢅ = VHA518-7Z
ꢃ7ꢅ6 = VHA518-8Z
ꢃ7ꢅ7 = VHA518-9Z
ꢃ7ꢅ8 = VHA518-10Z
ꢃ7ꢅ9 = VHA518-11Z
S = 0.001 ꢀ
U = 0.002 ꢀ
X = 0.0025 ꢀ
V = 0.005 ꢀ
T = 0.01 ꢀ
Q = 0.02 ꢀ
A = 0.05 ꢀ
B = 0.1 ꢀ
L = bulk pack
C = 0.25 ꢀ
D = 0.5 ꢀ
F = 1.0 ꢀ
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1750 120K500 V 9 L:
TYPE: VHA512Z
VALUE: 120.5 kΩ
ABSOLUTE TOLERANCE: 0.005 ꢀ
TERMINATION: lead (Pb)-free
PACKAGING: bulk pack
HISTORICAL PART NUMBER: VHAꢅꢃ.ZT ꢃ.ꢀKꢅꢀ V B (will continue to be used)
VHAꢅꢃ.Z
T
ꢃ.ꢀKꢅꢀ
V
B
MODEL
TERMINATION
PLASTIC SLEEVE
OHMIC VALUE
TOLERANCE
PACKAGING
B = bulk pack
VHP.ꢀ.Z
T = lead (Pb)-free
None = tin/lead
P = plastic sleeve
None = standard
ꢃ.ꢀKꢅꢀ = 120.5 kΩ
S = 0.001 ꢀ
U = 0.002 ꢀ
X = 0.0025 ꢀ
V = 0.005 ꢀ
T = 0.01 ꢀ
Q = 0.02 ꢀ
A = 0.05 ꢀ
B = 0.1 ꢀ
VHP.ꢀ.ZJ
VHA4ꢃ.Z
VHA4ꢃ4Z
VHAꢅꢃ.Z
VHAꢅꢃ6-4Z
VHAꢅꢃ6-ꢅZ
VHAꢅꢃ6-6Z
VHAꢅꢃ8-7Z
VHAꢅꢃ8-8Z
VHAꢅꢃ8-9Z
VHAꢅꢃ8-ꢃꢀZ
VHAꢅꢃ8-ꢃꢃZ
C = 0.25 ꢀ
D = 0.5 ꢀ
F = 1.0 ꢀ
Note
* Application engineering release: for non-standard requests, please contact application engineering.
www.vishay.com
4
For any questions, contact: foil@vishay.com
Document Number: 63120
Revision: 17-Jun-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
Y1758120M500F
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and
VISHAY
Y1758120M500Q
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and
VISHAY
Y1758120M500S
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and
VISHAY
Y1758120M500T
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and
VISHAY
Y1758120M500U
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and
VISHAY
Y1758120M500V
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and
VISHAY
Y1758120M500X
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and
VISHAY
Y1758120R500A
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and
VISHAY
Y1758120R500B
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and
VISHAY
Y1758120R500C
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and
VISHAY
Y1758120R500D
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and
VISHAY
Y1758120R500F
Hermetically Sealed Ultra High Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 % and
VISHAY
©2020 ICPDF网 联系我们和版权申明