Y405310R0000K0L [VISHAY]
RESISTOR, TRIMMER, METAL FOIL, 21 TURN(S), 0.25 W, 10 ohm, 1/4 INCH, SQUARE, 3 PINS, ROHS COMPLIANT;型号: | Y405310R0000K0L |
厂家: | VISHAY |
描述: | RESISTOR, TRIMMER, METAL FOIL, 21 TURN(S), 0.25 W, 10 ohm, 1/4 INCH, SQUARE, 3 PINS, ROHS COMPLIANT PC 电阻器 |
文件: | 总5页 (文件大小:115K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Accutrim™ 1240 (RJ26 Style)
Vishay Foil Resistors
Bulk Metal® Foil Technology Ultra High Precision Trimming Potentiometers,
1/4" Square, RJ26 Style, Designed to Meet or Exceed The Requirements of
MIL-PRF-39035, Char. H with a Smooth and Unidirectional Output
FEATURES
• Temperature coefficient of resistance (TCR):
10 ppm/°C. (- 55 °C to + 150 °C ref. at + 25 °C);
through the wiper (3)
low values)
;
25 ppm/°C (see table 2 for
• A smooth and unidirectional resistance with
leadscrew adjustment
• Load life stability: 0.1 % typical ΔR, 1.0 % maximum ΔR
under full rated power at + 85 °C for 10 000 h
• Settability: 0.05 % typical; 0.1 % maximum
• Setting stability: 0.1 % typical; 0.5 % maximum, DSS
• Power rating: 0.25 W at + 85 °C
1240P
1240W
1240X
INTRODUCTION
Vishay Foil precision trimmers have the Bulk Metal® Foil
resistive element which possesses a unique inherent
temperature and load life stability. Plus, their advanced
virtually back lash-free adjustment mechanism makes them
easy to set quickly and accurately and keeps the setting
exactly on target.
• Resistance range: 5 Ω to 10 kΩ
• Tolerance: 5 %, 10 %
• Electrostatic discharge (ESD) up to 25 000 V
• Terminal finish: gold plated (tin/lead finish is available on
request)
BULK METAL
FOIL
WIREWOUND
CERMET
Wiper Travel
Wiper Travel
Wiper Travel
TABLE 1 - MODEL SELECTION
MODEL
TERMINATION STYLE
W-edge mount, top adjust
X-edge mount, side adjust
P-horizontal mount, side adjust
AVERAGE WEIGHT (g)
POWER RATING at + 85 °C AMBIENT
NO. OF TURNS
21
1240
0.4
0.25 W
2
Note
• See Figure 1, next page
TABLE 2 - 1240 (RJ26) SERIES
TABLE 3 - VALUES VS. TOLERANCES
ELECTRICAL SPECIFICATIONS
STANDARD RESISTANCE VALUES
STANDARD
Temperature Coefficient of
10 ppm/°C maximum
(in Ω)
TOLERANCE
Resistance (TCR) 50 Ω to 10 kΩ
(- 55 °C to + 150 °C,
+ 25 °C ref.)
End-to-end (2)
5, 10
10 %
5 %
Temperature Coefficient of
Resistance 5, 10 and 20 Ω
20 ppm/°C
25 ppm/°C
20, 50, 100, 200, 500, 1K, 2K, 5K, 10K
Through the wiper (3)
Stability
0.1 % typical ΔR
1.0 % maximum ΔR
(under full rated power of
0.25 W at + 85 °C)
Load life at 10 000 h
End-to-end (2)
TABLE 4 - MECHANICAL SPECIFICATIONS
Power Rating (4)
Settability
0.25 W at + 85 °C
Adjustment Turns
21
2
0.05 % typical;
0.1 % maximum
0.1 % typical;
0.5 % maximum
3 Ω typical;
10 Ω maximum
0.25 % typical;
1.0 % maximum
Mechanical Stops
Wiper idles - no discontinuity
All welded - no flux
Setting Stability
Internal
Terminations
Contact Resistance
Variation - CRV (noise) (5)
1240X - diallyl-phthalate: green (DAP)
1240W - diallyl-phthalate: green (DAP)
1240P - thermoplastic: black
Hop-off
Case Material
High-Frequency Operation
Rise time
Inductance
Capacitance
1.0 ns without ringing
0.08 µH typical
0.5 pF typical
Shaft Torque
Backlash
3 oz. in. maximum
0.005 % typical
Operating Temperature Range
- 55 °C to + 150 °C
Document Number: 63053
Revision: 26-Mar-09
For any questions, contact: foil@vishay.com
www.vishay.com
1
Accutrim™ 1240 (RJ26 Style)
Vishay Foil Resistors
FIGURE 1 - SCHEMATIC AND DIMENSIONS in Inches (Millimeters)
1240X
1240W
0.050" (1.27 mm) C
0.040" (1.02 mm) C
0.040" (1.02 mm) C
VISHAY
2
0.250" (6.35 mm) D
0.250" (6.35 mm) D
VISHAY
CW
1
3
3
1
CW
2
3
2
1
1
2
3
0.250" (6.35 mm) D
0.250" (6.35 mm) D
0.050" (1.27 mm) C
0.050" (1.27 mm) C
0.175" (4.45 mm) C
0.010" (0.25 mm) A
0.050" (1.27 mm) C
0.175" (4.45 mm) C
0.050" (1.27 mm) C
0.100" (2.54 mm) A
0.050" (1.27 mm) C
0.100" (2.54 mm) A
0.100" (2.54 mm) A
0.100" (2.54 mm) A
0.125" (3.18 mm) C
0.125" (3.18 mm) C
(bottom view)
(bottom view)
1240P
0.050" (1.27 mm) C
VISHAY
0.175" (4.45 mm) C
CW
TOLERANCES:
STANDARD MARKING:
Model No.
A = 0.005" (0.13 mm)
C = 0.010" (0.25 mm)
D = 0.020" (0.51 mm)
1
3
Date Code
Resistance Value
Tolerance
1
2
3
0.250" (6.35mm) D
0.055" (1.40 mm) C
NOTES:
0.035" (0.89 mm) C
0.016"
(0.41 mm) A
Adjustment screw 0.080" (2.03 mm) diameter with
0.025" (0.64 mm) X 0.030" (0.76 mm) slot. Tolerance on
screw dimensions is 0.005" (0.13 mm). Model 1240
has gold plated terminal pins 0.016" (0.41 mm) 0.001"
(0.03 mm) diameter, 0.200" (5.08 mm) length minimum.
Resistance
Value
0.100" (2.54 mm) A
0.125" (3.18 mm) C
Tolerance
0.250" (6.35 mm) D
Model No.
Date Code
0.100" (2.54 mm) A
FIGURE 2 - POWER DERATING CURVE
FIGURE 3 - 1240W 10 k
Ω LOAD LIFE, 20 UNITS,
10 000 h at 0.25 W, + 85 °C (Wiper at CW)
+ 2000
+ 1500
+ 1000
+ 500
0
+ 85 °C
+ 100
+ 75
+ 50
+ 25
0
- 500
- 1000
- 1500
- 2000
- 75 - 50 - 25
0
+ 25 + 50 + 75 + 100 + 125 + 150 + 175
Ambient Temperature °C
0
2000
4000
6000
8000
10 000
Time (h)
www.vishay.com
2
For any questions, contact: foil@vishay.com
Document Number: 63053
Revision: 26-Mar-09
Accutrim™ 1240 (RJ26 Style)
Vishay Foil Resistors
TABLE 5 - COMPARISON
MIL-PRF-39035/3 CHARACTERISTIC H (6)
MODEL 1240 MAXIMUM
TEST GROUP I
Conditioning
1.0 %
0.5 %
Contact resistance variation - CRV (noise)
Immersion
3.0 % or 3 Ω (7)
3 Ω typical, 10 Ω maximum
No continuous stream of bubbles
No continuous stream of bubbles
TEST GROUP I a
Visual and mechanical
Actual effective electrical travel
End resistance
No failures
10 to 25 turns
2 % or 2 Ω (7)
No failures
21 2 turns
2 Ω for values ≤ 1 kΩ;
5 Ω for values ≥ 2 kΩ;
Dielectric withstanding voltage - DWV
Per MIL-STD-202, methods 301 and 105
Atmospheric pressure
Barometric pressure
600 VAC, 1 min
250 VAC, 1 min
≥ 1000 MΩ
3 oz. in. maximum
1.0 %
600 VAC, 1 min
250 VAC, 1 min
> 1000 MΩ
3 oz. in. maximum
0.5 %
Insulation resistance
Shaft torque
Thermal shock
Setting stability
1.0 %
0.5 %
TEST GROUP II
Solderability
Per MIL-STD-202, method 208
Per MIL-STD-202, method 208
TEST GROUP III
Resistance temperature characteristic - TCR
Moisture resistance
0.005 %/°C ( 50 ppm/°C)
1.0 %
0.001 %/°C ( 10 ppm/°C)
0.5 %
3 Ω typical, 10 Ω maximum
Contact resistance variation - CRV (noise)
3.0 % or 3 Ω (7)
TEST GROUP IV
Settability
1.0 %
1.0 %
0.1 %
Shock
0.5 %
0.5 %
Setting stability
1.0 %
Vibration
1.0 %
0.5 %
0.5 %
Setting stability
1.0 %
Contact resistance variation - CRV (noise)
Salt spray
3.0 % or 3 Ω (7)
No corrosion
3 Ω typical, 10 Ω maximum
No corrosion
TEST GROUP V
Solder heat
1.0 %
0.1 %
Low-temperature operation
Setting stability
Low-temperature storage
High-temperature exposure
Setting stability
Contact resistance variation - CRV (noise)
Integrity of shaft
1.0 %
2.0 %
0.5 %
0.5 %
0.5 %
1.0 %
3.0 %
0.5 %
2.0 %
0.5 %
3 % or 3 Ω (7)
No loosening or breakage
3 Ω typical, 10 Ω maximum
No loosening or breakage
TEST GROUP VI
Rotational life (200 cycles)
Contact resistance variation - CRV (noise)
Terminal strength
2.0 %
3 % or 3 Ω (7)
2 lbs.
2.0 %
3 Ω typical, 10 Ω maximum
2 lbs.
TEST GROUP VII
Life (2000 h) at + 85 °C
Life (10 000 h) at + 85 °C
3.0 %
5.0 %
0.1 % typical, 1.0 % maximum
0.1 % typical, 1.0 % maximum
TEST GROUP VIII
Solvent resistance
No failures
No failures
Notes
VISHAY TRIMMERS ARE INSPECTED
(1)
(2)
(3)
Maximum is 1.0 % A.Q.L. standard for all specifications except
100 % for:
• Immersion
• Resistance tolerance check
• End resistance
• Visual-mechanical
TCR. (For TCR information, see notes 2 and 3.)
Maximum TCR applies to the 3 σ (sigma) limit or 99.73 % of a
production lot. (Measured end-to-end with wiper off the element.)
Measurements of TCR through the wiper are influenced more by
setting stability and the percentage of the total resistance in use
(at the wiper) than by fundamental resistance change due to
temperature alone. The parameter shown in table 2 is a 2 s
distribution typifying the behavior of the device when used with
40 % or more of the total resistance in use.
Derated linearly for full power at + 85 °C to zero power at
+ 150 °C. See Figure 2 on previous page.
Independent of resistance value. 3 Ω maximum available on
special request.
• Dynamic tests for continuity, CRV
By sample for:
• TCR
• DWV
(4)
(5)
(6)
(7)
All ΔR’s are measured to the tolerance specified + 0.01 Ω.
Whichever is greater.
Special Available Options:
Special marking
Burn-in and screening operations.
Document Number: 63053
Revision: 26-Mar-09
For any questions, contact: foil@vishay.com
www.vishay.com
3
Accutrim™ 1240 (RJ26 Style)
Vishay Foil Resistors
TABLE 6 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y4053500R000J0L (preferred part number format)
DENOTES PRECISION
VALUE
CHARACTERISTICS (1)
Y
R = Ω
K = kΩ
0 = gold plated termination (lead (Pb)-free)
1 to 999 = custom
Y
4
0
5
3
5
0
0
R
0
0
0
J
0
L
PRODUCT CODE
TOLERANCE
PACKAGING
4053 = 1240W
5053 = 1240X
0053 = 1240P
J = 5 %
K = 10 %
L = foam/box pack
FOR EXAMPLE: ABOVE GLOBAL ORDER Y4053 500R000 J 0 L:
TYPE: 1240W
VALUE: 500.0 Ω
ABSOLUTE TOLERANCE: 5.0 %
TERMINATION: gold plated termination (lead (Pb)-free)
PACKAGING: foam/box pack
HISTORICAL PART NUMBER: 1240W 500R00 J B (will continue to be used)
1240W
500R00
J
B
MODEL
RESISTANCE VALUE
TOLERANCE
PACKAGING
B = foam/box pack
1240W
1240X
1240P
500R00 = 500.0 Ω
J = 5 %
K = 10 %
Note
(1)
For non-standard requests, please contact application engineering.
www.vishay.com
4
For any questions, contact: foil@vishay.com
Document Number: 63053
Revision: 26-Mar-09
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
Y4053200R000J0L
RESISTOR, TRIMMER, METAL FOIL, 21 TURN(S), 0.25 W, 200 ohm, 1/4 INCH, SQUARE, 3 PINS, ROHS COMPLIANT
VISHAY
Y405320R0000J0L
RESISTOR, TRIMMER, METAL FOIL, 21 TURN(S), 0.25 W, 20 ohm, 1/4 INCH, SQUARE, 3 PINS, ROHS COMPLIANT
VISHAY
Y40532K00000J0L
RESISTOR, TRIMMER, METAL FOIL, 21 TURN(S), 0.25 W, 2000 ohm, 1/4 INCH, SQUARE, 3 PINS, ROHS COMPLIANT
VISHAY
Y4053500R000J0L
RESISTOR, TRIMMER, METAL FOIL, 21 TURN(S), 0.25 W, 500 ohm, 1/4 INCH, SQUARE, 3 PINS, ROHS COMPLIANT
VISHAY
Y405350R0000J0L
RESISTOR, TRIMMER, METAL FOIL, 21 TURN(S), 0.25 W, 50 ohm, 1/4 INCH, SQUARE, 3 PINS, ROHS COMPLIANT
VISHAY
Y40535K00000J0L
RESISTOR, TRIMMER, METAL FOIL, 21 TURN(S), 0.25W, 5000ohm, 1/4 INCH, SQUARE, 3 PINS, ROHS COMPLIANT
VISHAY
Y40535R00000K0L
RESISTOR, TRIMMER, METAL FOIL, 21 TURN(S), 0.25 W, 5 ohm, 1/4 INCH, SQUARE, 3 PINS, ROHS COMPLIANT
VISHAY
Y405720R0000K0L
RESISTOR, TRIMMER, METAL FOIL, 21 TURN(S), 0.25 W, 20 ohm, 1/4 INCH, SQUARE, 3 PINS, LEAD FREE
VISHAY
Y4061101R000D0W
Fixed Resistor, Metal Foil, 0.12W, 101ohm, 0.5% +/-Tol, -2.5,2.5ppm/Cel, 0603
VISHAY
Y4061124R000D0W
Fixed Resistor, Metal Foil, 0.12W, 124ohm, 0.5% +/-Tol, -2.5,2.5ppm/Cel, 0603
VISHAY
©2020 ICPDF网 联系我们和版权申明