Y5011300K000B0L [VISHAY]
RES 300K OHM 0.6W 0.1% RADIAL;
| 型号： | Y5011300K000B0L |
| 厂家： | 
VISHAY |
| 描述： | RES 300K OHM 0.6W 0.1% RADIAL |
| 文件： | 总6页 (文件大小：1855K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
S Series
High Precision Foil Resistor with TCR of ± 2.0 ppm/°C,
Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 %
FEATURES
Temperature coefficient of resistance (TCR):
- 55 °C to + 125 °C, 25 °C ref.
- S10XC / D series: ± 2 ppm/°C typical (see table
1)
- S10
XK series: ± 1 ppm/°C typical (see table 1)
Power rating: to 1 W at + 125 °C
Resistance tolerance: to ± 0.005 % (50 ppm)
Load life stability: ± 0.005 % at 70 °C, 2000 h at rated power
Resistance range: 0.5 to 1 M
(for higher or lower
values, please contact Application Engineering)
INTRODUCTION
Vishay Foil resistors are not restricted to standard values;
specific “as required” values can be supplied at no extra
cost or delivery (e.g. 1K2345 vs. 1K)
Electrostatic discharge (ESD) at least to 25 kV
Bulk Metal® Foil (BMF) technology outperforms all other
resistor technologies available today for applications that
require high precision and high stability.
Non inductive, non capacitive design
This technology has been pioneered and developed by
Vishay Foil Resistors (VFR), and products based on this
technology are the most suitable for a wide range of
applications. BMF technology allows the production of
customer-oriented products, designed to satisfy specific
challenging technical requirements.
Rise time: 1 ns effectively no ringing
Current noise: 0.010 µVRMS/V of applied voltage (< - 40 dB)
Thermal EMF: 0.05 µV/°C
Voltage coefficient: < 0.1 ppm/V
Low inductance: < 0.08 µH
Non hot-spot design
Terminal finishes available: lead (Pb)-free, tin/lead alloy
The S series of BMF resistors offers low TCR, excellent load
life stability, tight tolerance, fast response time, low current
noise, low thermal EMF and low voltage coefficient, all in one
resistor.
Matched sets are available on request
(TCR tracking: to 0.5 ppm/°C)
Prototype quantities available in just 5 working days
or sooner. For more information, please contact
foil@vpgsensors.com
The S series is virtually insensitive to destabillizing factors.
The resistor element is a solid alloy that displays the
desirable bulk properties of its parent material, thus it is
inherently stable and noise free. The standard design of
For better TCR performances please review the
datasheets for the Z Series and Z203
these resistors provides
a
unique combination of
characteristics found in no other single resistor.
FIGURE 1 - TYPICAL RESISTANCE CHANGE
VERSUS TEMPERATURE CURVES AND
CHORD SLOPES (TCR) OF TWO ALLOY
TYPES IN MILITARY RANGE
VFR's application engineering department is available to
advise and to make recommendations. For non-standard
technical requirements and special applications, please
contact foil@vpgsensors.com.
+ 150
+ 100
TABLE 1 - RESISTANCE VERSUS TCR
–1 ppm/°C
+2 ppm/°C
+1 ppm/ C
(- 55 °C to + 125 °C, + 25 °C ref.)
°
+ 50
0
ΔR
TYPICAL TCR AND
MAX SPREAD
(ppm/°C)
RESISTANCE
VALUE ()
R
RESISTOR(1) (2)
(ppm)
- 50
S10X(C) / (D)
S10X(K)
80 to < 1M
± 2 ± 2.5
± 1 ± 2.5
± 2 ± 3.5
± 1 ± 3.5
± 2 ± 4.5
± 1 ± 4.5
- 100
- 150
- 200
–2 ppm/°C
80 to < 600K
S10X(C) / (D)
S10X(K)
50 to < 80
0.5 to < 50
- 50
- 55
- 25
0
+ 25
+ 50
+ 75 + 100 + 125
S10X(C) / (D)
S10X(K)
Temperature (°C)
C Alloy
K Alloy
2 ppm/°C
1 ppm/°C
(1)
X refers to S Series model number - see Table 2
(2) (C) and (D) refer to C Foil Alloy Types; (K) refers to the K Foil Alloy type - see Figure 1
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63001
Revision: 02-Mar-15
For any questions, contact
foil@vpgsensors.com
www.vishayfoilresistors.com
1
S Series
FIGURE 2 - STANDARD IMPRINTING AND DIMENSIONS
Front View
Rear View
Optional Customer Part Number
Print specification, etc. if required
L
W
Date Code
Resistance
01
10
VFR
XXXX
S102C
XXXXXX
100R01
0.01 %
Value Code
Year Week
H
Tolerance
ST1)
SW
LL
Model Number
LS
Lead Material #22 AWG
Round Solder Coated Copper
(Pb - free coating available)
Note
1. Standoffs provided to allow proper flushing of flux, debris, and contaminates from under resistor after all solder operations.
2. The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board
when the standoffs are seated on the printed circuit board.
TABLE 2 - MODEL SELECTION
AMBIENT
TIGHTEST
TOLERANCE
VS. LOWEST
RESISTANCE
VALUE
DIMENSIONS
mm
POWER RATING
RESISTANCE MAXIMUM
AVERAGE
WEIGHT
IN GRAMS
MODEL
NUMBER
RANGE
WORKING
VOLTAGE
at
at
F (1)
(INCHES)
()
INCHES
+ 70 °C + 125 °C
0.6 W
0.3 W
0.2 W
W: 0.105 ± 0.010
L: 0.300 ± 0.010
H: 0.326 ± 0.010
ST: 0.010 min.
SW: 0.040 ± 0.005 1.02 ± 0.13
LL: 1.000 ± 0.125
LS: 0.150 ± 0.005
2.67 ± 0.25
7.62 ± 0.25
8.28 ± 0.25
0.254 min.
S102C
1 to 150K
1 to 100K
1 to 500K
1 to 300K
1 to 750K
1 to 500K
0.5 to 1M
0.5 to 600K
(S102J) (2)
up to 100K
0.4 W
300
350
350
500
0.6
1.4
1.9
4.0
S102K
(S102L) (2)
over 100K
25.4 ± 3.18
3.81 ± 0.13
1.0 W
0.5 W
0.3 W
W: 0.160 max.
L: 0.575 max.
H: 0.413 max.
ST: 0.035 ± 0.005 0.889 ± 0.13
SW: 0.050 ± 0.005 1.27 ± 0.13
LL: 1.000 ± 0.125
LS: 0.400 ± 0.020 10.16 ± 0.51
4.06 max.
14.61 max.
10.49 max.
(0.138)
(0.565)
(0.413)
S104D
(S104F) (1)
up to 200K
0.6 W
0.005 %/50
0.01 %/25
0.02 %/12
0.05 %/5
0.1 %/2
0.50 %/1
1 %/0.5
S104K
over 200K
25.4 ± 3.18
1.5 W 0.75 W
up to 300K
W: 0.160 max.
L: 0.820 max.
H: 0.413 max.
ST: 0.035 ± 0.005 0.889 ± 0.13
SW: 0.050 ± 0.005 1.27 ± 0.13
LL: 1.000 ± 0.125
LS: 0.650 ± 0.020 16.51 ± 0.51 (0.7 ± 0.05)
4.06 max.
20.83 max.
10.49 max.
(0.138)
(0.890)
(0.413)
S105D
(S105F) (1)
0.8 W
0.4 W
S105K
S106D
S106K
over 300K
25.4 ± 3.18
2.0 W
1.0 W
1.0 W
W: 0.260 max.
L: 1.200 max.
H: 0.413 max.
ST: 0.035 ± 0.005 0.889 ± 0.13
SW: 0.050 ± 0.005 1.27 ± 0.13
6.60 max.
30.48 max.
10.49 max.
up to 400K
0.5 W
over 400K
LL: 1.000 ± 0.125
25.4 ± 3.18
LS: 0.900 ± 0.020 22.86 ± 0.51
Notes
(1)
(2)
S104F and S105F have different package dimensions (see the third column of dimensions). All other specifications are the same.
0.200" (5.08 mm) lead spacing available - specify S102J for S102C, and S102L for S102K.
www.vishayfoilresistors.com
2
For any questions, contact
foil@vpgsensors.com
Document Number: 63001
Revision: 02-Mar-15
S Series
FIGURE 3 - POWER DERATING CURVE
FIGURE 4 - TRIMMING TO VALUES
(conceptual illustration)
- 55 °C
+ 70 °C
200 %
175 %
150 %
125 %
100 %
75 %
Double Rated Power
Current Path
Interloop Capacitance
Reduction in Series
Before Trimming
Rated Power
Current Path
After Trimming
Trimming Process
Mutual Inductance
Reduction due
to Change in
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Current Direction
50 %
25 %
Resistance
0 %
- 75 - 50 - 25
0
25 50 75 100 125 150 175 200
Ambient Temperature (°C)
Note: Foil shown in black, etched spaces in white
TABLE 3 - ENVIRONMENTAL PERFORMANCE COMPARISON
MIL-PRF-55182
CHAR J
S-SERIES
MAXIMUM R
S-SERIES
TYPICAL R
Test Group I
Thermal shock, 5 x (- 65 °C to + 150 °C)
Short time overload, 6.25 x rated power
Test Group II
± 0.2 %
± 0.2 %
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.002 % (20 ppm)
± 0.003 % (30 ppm)
Resistance temperature characteristics(1)
Low temperature storage (24 h at - 65 °C)
± 25 ppm/°C
± 0.15 %
± 6.5 ppm/°C
± 2.0 ppm/°C
± 0.01 % (100 ppm)
± 0.002 % (20 ppm)
Low temperature operation
± 0.15 %
± 0.2 %
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.002 % (20 ppm)
± 0.002 % (20 ppm)
(45 min, rated power at - 65 °C)
Terminal strength
Test Group III
Dielectric Withstanding Voltage (DWV)
Resistance to solder heat
Moisture resistance
Test Group IV
± 0.15 %
± 0.1 %
± 0.4 %
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.05 % (500 ppm)
± 0.002 % (20 ppm)
± 0.005 % (50 ppm)
± 0.01 % (100 ppm)
Shock
± 0.2 %
± 0.2 %
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.002 % (20 ppm)
± 0.002 % (20 ppm)
Vibration
Test Group V
Life test at 0.3 W/+ 125 °C
2000 h
± 0.5 %
± 2.0 %
± 0.015 % (150 ppm)
± 0.05 % (500 ppm)
± 0.01 % (100 ppm)
± 0.03 % (300 ppm)
10 000 h
Test Group Va
Life test at 0.6 W (2 x rated power)/+ 70 °C, 2000 h
Test Group VI
± 0.5 %
± 2.0 %
5 ppm/V
± 0.015 % (150 ppm)
± 0.1 % (1000 ppm)
< 0.1 ppm/V
± 0.01 % (100 ppm)
± 0.05 % (500 ppm)
< 0.1 ppm/V
High temperature exposure (2000 h at + 175 °C)
Test Group VII
Voltage coefficient
See Table 1.
(1)
Document Number: 63001
Revision: 02-Mar-15
For any questions, contact
foil@vpgsensors.com
www.vishayfoilresistors.com
3
S Series
FIGURE 5 - LONG-TERM STABILITY OVER 29 YEARS (0.1W AT 70°C, 50 SAMPLES S102C,
10K)
40
20
0
-20
-40
-60
-80
-100
-120
0
5
10
15
20
25
30
Time (Years)
STANDARD OPERATIONS AND TEST
CONDITIONS
A. Standard Test Operations:
IMPROVED PERFORMANCE TESTING (IPT)
The preceding information is based on product directly off
the production line. Improved performance (meaning
increased time stability with load and other stresses) is
available through factory conducted “Improved Performance
Testing”. The test routine is usually tailored to the user’s
stability objectives and IPT-processed resistors can exhibit
improved load-life stability levels of less than 50 ppm.
By 100 % Inspection
Short-time overload (6.25 x rated power for 5 s)
Resistance - tolerance check
Visual and mechanical
By Sample Inspection
TCR
Various screen test routines are available and all anticipated
stresses must be taken into account before settling on one
specific test routine. VFR's application engineering
department is prepared to discuss and recommend
appropriate routines given the full spectrum of anticipated
stresses and stability requirements.
Environmental tests per table 3 on a quarterly basis to
establish performance by similarity
B. Standard Test Conditions:
Lead test point: 0.5" (12.7 mm) from resistor body
Temperature: + 23 °C ± 2 °C
Relative humidity: per MIL-STD-202
TABLE 4 - “S” SERIES SPECIFICATIONS
Stability (1)
Load life at 2000 h
± 0.015 % (150 ppm) Maximum R at 0.3 W/+ 125 °C
± 0.005 % (50 ppm)
± 0.05 % (500 ppm)
± 0.01 % (100 ppm)
0.010 µV
Maximum R at 0.1 W/+ 70 °C
Maximum R at 0.3 W/+ 125 °C
Maximum R at 0.05 W/+ 125 °C
(RMS)/V of applied voltage (- 40 dB)
Load life at 10 000 h
Current Noise
High Frequency Operation
Rise time
1.0 ns at 1 k
Inductance (L) (2)
0.1 µH maximum; 0.08 µH typical
1.0 pF maximum; 0.5 pF typical
< 0.1 ppm/V (3)
Capacitance (C)
Voltage Coefficient
Thermal Electromotive Force (EMF) (4)
0.1 µV/°C Maximum; 0.05 µV/°C typical
1 µV/W
(Model S102C)
Notes
(1)
Load life R maximum can be reduced by 80 %, please contact applications engineering department.
(2)
(3)
(4)
Inductance (L) due mainly to the leads.
The resolution limit of existing test equipment (within the measurement capability of the equipment, or “essentially zero”.)
µV/°C relates to EMF due to lead temperature difference and µV/watt due to power applied to the resistor.
www.vishayfoilresistors.com
4
For any questions, contact
foil@vpgsensors.com
Document Number: 63001
Revision: 02-Mar-15
S Series
TABLE 5 - GLOBAL PART NUMBER INFORMATION (1)
NEW GLOBAL PART NUMBER: Y000780K5000V9L (preferred part number format)
DENOTES PRECISION
VALUE
CHARACTERISTICS
Y
R =
0 = standard
K = k
M = M
9 = lead (Pb)-free
1 to 999 = custom
Y
0
0
0
7
8
0
K
5
0
0
0
V
9
L
PRODUCT CODE
RESISTANCE TOLERANCE
PACKAGING
0007 = S102C
0785 = S102J
0062 = S102K
0786 = S102L
0011 = S104D
5011 = S104F
0101 = S104K
4101 = S104L
0012 = S105D
4012 = S105F
0102 = S105K
4102 = S105L
0013 = S106D
0103 = S106K
V = ± 0.005 %
T = ± 0.01 %
Q = ± 0.02 %
A = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
L = bulk pack
FOR EXAMPLE: ABOVE GLOBAL ORDER Y0007 80K5000 V 9 L:
TYPE: S102C
VALUE: 80.5 k
ABSOLUTE TOLERANCE: ± 0.005 %
TERMINATION: lead (Pb)-free
PACKAGING: bulk pack
HISTORICAL PART NUMBER: S102C T 80K500 V B (will continue to be used)
S102C
T
80K500
V
B
MODEL
TERMINATION
RESISTANCE VALUE
TOLERANCE
PACKAGING
B = bulk pack
S102C
S102J
S102K
S102L
S104D
S104F
S104K
S104L
S105D
S105F
S105K
S105L
S106D
S106K
T = lead (Pb)-free
250R00 = 250.00
5K2310 = 5.231 k
1M000 = 1 M
V = ± 0.005 %
T = ± 0.01 %
Q = ± 0.02 %
A = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
None = tin/lead alloy
Note
(1)
For non-standard requests, please contact application engineering.
Document Number: 63001
Revision: 02-Mar-15
For any questions, contact
foil@vpgsensors.com
www.vishayfoilresistors.com
5
Legal Disclaimer Notice
Vishay Precision Group, Inc.
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.
The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.
VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.
Copyright Vishay Precision Group, Inc., 2014. All rights reserved.
Document No.: 63999
Revision: 15-Jul-2014
www.vpgsensors.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明