Y5076V0029VV9L [VISHAY]
Array/Network Resistor, Divider, Metal Foil, 0.1W, 2000ohm, 200V, 0.005% +/-Tol, 2ppm/Cel, Through Hole Mount, 4019, RADIAL LEADED, ROHS COMPLIANT;型号: | Y5076V0029VV9L |
厂家: | VISHAY |
描述: | Array/Network Resistor, Divider, Metal Foil, 0.1W, 2000ohm, 200V, 0.005% +/-Tol, 2ppm/Cel, Through Hole Mount, 4019, RADIAL LEADED, ROHS COMPLIANT PC 电阻器 |
文件: | 总5页 (文件大小:462K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VHD200, VHD144
Vishay Foil Resistors
Bulk Metal® Foil Hermetically sealed, Small Package,
Voltage Dividers with TCR Tracking of 0.1 ppm/°C
and Tolerance Match down to 0.001 %
FEATURES
• Temperature coefficient of resistance (TCR):
Absolute: 2 ppm/°C typical
(- 55 °C to + 125 C, 25 °C ref.)
Tracking: 0.1 ppm/°C typical
Pb-free
Available
RoHS*
COMPLIANT
• Tolerance:
absolute to 0.005 %
match to 0.001 %
• Power rating: VHD144 0.2 W at 70 °C (see table 1)
VHD200 0.1 W at 70 °C (see table 1)
• Ratio stability: < 0.001 % (10 ppm) 0.2 W at 70 °C for 2000 h
• Electrostatic discharge (ESD) above 25 000 V
• Non inductive, non capacitive design
• Rise time: 1 ns without ringing
Any value at any ratio available within resistance range
Vishay Models VHD200 and VHD144 are hermetic versions
of the molded divider 300144. The difference between them
is that the VHD144 has the full power rating of the 300144
while the VHD200 has a reduced power rating in exchange
for a full spectrum of values without the time delay for new
artwork (for values not yet tooled) and without NRE charges.
Further, the VHD200 is oil filled, providing additional
moisture protection and allowing considerable improvement
in ratio match and TCR tracking.
• Current noise: < - 40 dB
• Thermal EMF: 0.05 µV/°C typical
• Voltage coefficient: < 0.1 ppm/V
• Non inductive: 0.08 µH
• Non hot spot design
• Terminal finishes available: lead (Pb)-free
tin/lead alloy
The value of the hermetic enclosure over the molded part is
in the long term performance. Moisture and oxygen both
pass through plastic and both contribute to long term
degradation of resistive elements. Divider ratios of 1:1 are
not as likely to lose ratio with time but as the ratios become
greater, the imbalance of power has more effect on the ratio
stability and the hermetic enclosure becomes of paramount
importance.
Our Application Engineering Department is available to
advise and make recommendations. For non-standard
technical requirements and special applications. Please
contact us.
• Any value available within resistance range (e.g. 1K234)
• Prototype samples available from 48 h. For more
information, please contact foil@vishaypg.com
•
For better performances, please contact us
R2
R1
Vin
-
Vout
+
VHD200,
VHD144
TABLE 1 - VHD200 AND VHD144 SPECIFICATIONS
STANDARD RESISTANCE
TOLERANCE
RESISTANCE
SHELF
LIFE
STABILITY
(ppm/yr)
TCR
TRACKING
AVAILABLE TO
VISHAY
MODEL
RATIO
AVAILABLE1)
(Ω)
POWER RATING3), 6)
ABSOLUTE
MATCH
AVAILABLE TO AVAILABLE TO
0.1 W at + 25 °C (for the entire resistive
element R1 + R2) divided proportionally
between the two elements (over 10K).4)
VHD2002)
VHD1445)
0.005 %
0.005 %
⎛
0.001 %
0.005 %
0.1 ppm/°C
5
5
Any value from
100 Ω to 20K
per side
< 0.5 ppm/°C
for like values
< 1 ppm/°C
standard
0.2 W at + 70 °C (for the entire resistive
element R1 + R2) divided proportionally
between the two elements.
Notes
R1
------------------
R2
R1 + R2
⎞
⎠
⎛
⎝
⎞
⎠
------------------
P1
=
P
P2
=
P
1. For resistance ratios outside the range, contact Vishay’s
Applications Engineering Department.
⎝
R1 + R2
2. The VHD200 is available in any required ratio between the
resistance values of 100 Ω and 20 kΩ, such that R1 can be any
value between 100 Ω and 20 kΩ and R2 can also be any value
between 100 Ω and 20 kΩ.
3. Power is proportional to the divider ratio.
Example: In a VHD144 (1K/10K dual), the power rating would be
18 mW on the 1K and 182 mW on the 10K, for a total of 200 mW
on R1 + R2.
4. For power rating of values below 10K, contact the applications
engineering department.
5. Any value from 100 Ω to 20 kΩ inclusive is available with some
derating of power.
6. Maximum voltage is 200 V.
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63036
Revision: 23-Mar-10
For any questions, contact: foil@vishaypg.com
www.foilresistors.com
1
VHD200, VHD144
Vishay Foil Resistors
FIGURE 2 - TRIMMING TO VALUES
FIGURE 1 - TYPICAL TCR CURVE
+ 150
+ 100
+ 50
Current Path
Before Trimming
Interloop Capacitance
Reduction in Series
Δ
R
0
R
(ppm)
- 50
Current Path
After Trimming
Trimming Process
Mutual Inductance
Reduction due
to Change in
- 100
- 150
- 200
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Current Direction
2 ppm/°C (+ 25 °C Reference)
- 50
- 55
- 25
0
+ 20
+ 50
+ 75
+ 100 + 125
Resistance
Ambient Temperature (°C)
Note: Foil shown in black, etched spaces in white
(For more details, see table 1)
FIGURE 3 - VHD200 AND VHD144 STANDARD PRINTING AND DIMENSIONS in inches (millimeters)
Standard Printing and Dimensions
Match
Tolerance
0.398
(10.11)
Schematic2)
VISHAY
0746
VHD200
0.430
Date Code
Model No.
(10.92)
1
R1
R2
0.095
(2.41)
0.047
(1.19)
0.751)
(19.05)
Low Resistance
Value Indicator
1
2
3
0.435
(11.05)
0.370
(9.40)
1
2
3
0.185
(4.70)
0.146
(3.71)
0.1 (2.54)
Notes
1. Lead wires: #22 AWG solder coated copper, 0.75" minimum length.
2. Each resistor contains 1 chip consisting of two resistive elements. Tol: 0.020".
FIGURE 2 - POWER DERATING CURVE
VHD144
VHD200
- 55 °C
100
+ 70
- 55 °C
+ 25
+ 125
100
75
50
25
0
75
50
25
0
- 50
0
+ 50
+ 100
+ 150
- 50
0
+ 50
+ 100 + 130
Ambient Temperature (°C)
Ambient Temperature (°C)
www.foilresistors.com
2
For any questions, contact: foil@vishaypg.com
Document Number: 63036
Revision: 23-Mar-10
VHD200, VHD144
Vishay Foil Resistors
TABLE 2 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y0076V0058QT9L (preferred part number format)
DENOTES PRECISION
RESISTANCE VALUE CODE
TOLERANCE MATCH
AER*
Y
VCODE
S = 0.001 %
V = 0.005 %
T = 0.01 %
Q = 0.02 %
A = 0.05 %
B = 0.1 %
0 = standard
9 = lead (Pb)-free
1 - 999 = custom
D = 0.5 %
F = 1.0 %
Y
0
0
7
6
V
0
0
5
8
Q
T
9
L
ABSOLUTE
TOLERANCE
PRODUCT CODE
PACKAGING
0076 = VHD144
5076 = VHD200
S = 0.001 %
V = 0.005 %
T = 0.01 %
Q = 0.02 %
A = 0.05 %
B = 0.1 %
D = 0.5 %
F = 1.0 %
L = bulk pack
FOR EXAMPLE: ABOVE GLOBAL ORDER Y0076 V0058 Q T 9 L:
TYPE: VHD144
VALUE: 2K/20K
ABSOLUTE TOLERANCE: 0.02 %
TOLERANCE MATCH: 0.01 %
TERMINATION: lead (Pb)-free
PACKAGING: bulk pack
HISTORICAL PART NUMBER: VHD144T 2K/20K TCR2 Q T B (will continue to be used)
VHD144
T
2K/20K
TCR2
Q
T
B
ABSOLUTE
TOLERANCE
TOLERANCE
MODEL
TERMINATION
OHMIC VALUE
TCR
PACKAGING
MATCH
VHD144
VHD200
T = lead (Pb)-free
None = tin/lead alloy
R1 = 2.0 kΩ
R2 = 20.0 kΩ
Characteristic
B = bulk pack
V = 0.005 %
T = 0.01 %
Q = 0.02 %
A = 0.05 %
B = 0.1 %
D = 0.5 %
F = 1.0 %
S = 0.001 %
V = 0.005 %
T = 0.01 %
Q = 0.02 %
A = 0.05 %
B = 0.1 %
D = 0.5 %
F = 1.0 %
Note
* For non-standard requests, please contact application engineering.
Document Number: 63036
Revision: 23-Mar-10
For any questions, contact: foil@vishaypg.com
www.foilresistors.com
3
VHD200, VHD144
Vishay Foil Resistors
TABLE 3 - VHD144 AND VHD200 POPULAR RATIOS (other values available upon request)
VCODE
V0009
V0010
V0100
V0055
V0223
V0097
V0094
V0001
V0042
V0006
V0226
V0003
V0013
V0107
V0014
V0159
V0005
R1
20K
20K
20K
19K4
17K5
15K
10K
10K
10K
10K
9K
R2
20K
10K
2K
VCODE
V0002
V0026
V0156
V0158
V0058
V0030
V0029
V0103
V0059
V0103
V0032
V0121
V0004
V0022
V0162
V0091
V0061
R1
R2
5K
5K
3K
19K2
6K
3K
9K7
20K
15K
20K
10K
8K323
2K
2K7
2K
10K
20K
18K
4K
2K
2K
2K
3K
2K
2K
1K5
1K
3K
10K
1K
16K
2K
9K
1K
8K
16K
20K
7K
1K
1K
6K
511R
500R
500R
300R
16K2
15K
500R
300R
6K
5K5
5K
7K7
10K
www.foilresistors.com
4
For any questions, contact: foil@vishaypg.com
Document Number: 63036
Revision: 23-Mar-10
Legal Disclaimer Notice
Vishay Precision Group
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
相关型号:
Y5076V0030AQ9L
Array/Network Resistor, Divider, Metal Foil, 0.1W, 2000ohm, 200V, 0.05% +/-Tol, 2ppm/Cel, Through Hole Mount, 4019, RADIAL LEADED, ROHS COMPLIANT
VISHAY
Y5076V0032AB9L
Array/Network Resistor, Divider, Metal Foil, 0.1W, 1000ohm, 200V, 0.05% +/-Tol, 2ppm/Cel, Through Hole Mount, 4019, RADIAL LEADED, ROHS COMPLIANT
VISHAY
Y5076V0032TB0L
Array/Network Resistor, Divider, Metal Foil, 0.1W, 1000ohm, 200V, 0.01% +/-Tol, 2ppm/Cel, Through Hole Mount, 4019, RADIAL LEADED
VISHAY
Y5076V0055VF9L
Array/Network Resistor, Divider, Metal Foil, 0.1W, 19400ohm, 200V, 0.005% +/-Tol, 2ppm/Cel, Through Hole Mount, 4019, RADIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明