Z201_07 [VISHAY]
Ultra High Precision Z-Foil Resistor with TCR of ± 0.05 ppm/°C, PCR of 5 ppm at Rated Power, Tolerance of ± 0.005 %; 超高精度Z箔电阻具有±的TCR为± 0.005 %, 0.05 PPM / ° C, 5 ppm的PCR ,在额定功率,容差型号: | Z201_07 |
厂家: | VISHAY |
描述: | Ultra High Precision Z-Foil Resistor with TCR of ± 0.05 ppm/°C, PCR of 5 ppm at Rated Power, Tolerance of ± 0.005 % |
文件: | 总5页 (文件大小:113K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Z201 (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Z-Foil Resistor with TCR of 0ꢀ0ꢁ ꢂꢂpm/C,
PCR of ꢁ ꢂꢂp at Rated Power, Tolerance of 0ꢀ00ꢁ ꢃ
and Load Life Stability of 0ꢀ00ꢁ ꢃ
INDUSTRY BREAKTHROUGH
FEATURES
• Temperature Coefficient of Resistance (TCR):
0.05 ppm/°C typical (0 °C to + 60 °C)
0.2 ppm/°C typical (-55 °C to + 125 °C,
+ 25 °C Ref.)
• Power Coefficient of Resistance “ΔR due to self
heating”: 5 ppm at Rated Power
Pb-free
Available
RoHS*
COMPLIANT
• Rated Power: 0.6 W at 70 °C
0.3 W at 125 °C
• Resistance Tolerance: to 0.005 %
• Load Life Stability: to 0.005 % at 70 °C, 2000 hours at
Rated Power
Any value at any tolerance available within resistance rage
• Resistance Range: 10 Ω to 100 kΩ (higher or lower Values
of Resistance available)
• Electrostatic Discharge (ESD) above 25 000 Volts
• Non Inductive, Non Capacitive Design
• Rise Time: 1.0 ns without ringing
• Current Noise: 0.01: - 40 dB
• Thermal EMF: 0.1 µV/°C Max.
INTRODUCTION
The Z201 (0.150" lead spacing) and Z201L (0.200" lead
spacing) Bulk Metal® Z-Foil resistors represent an industry
breakthrough. This is the 3rd in a series of ultra-precision
resistors since the first Bulk Metal® Foil resistor was
introduced by Vishay in 1962. Each represents an
improvement on the earlier model. The TCR slope of the
Z201 is 0.2 ppm/°C (- 55 °C to + 125 °C, + 25 °C Ref.) and is
an order of magnitude better than the original S102C. The
Bulk Metal® Z-Foil resistor is the ultimate choice in the most
demanding analog applications.
0.05 µV/°C typical
• Voltage Coefficient: < 0.1 ppm/V
• Non Inductive: 0.08 µH
• Terminal Finishes available: Lead (Pb)-free
Tin/Lead Alloy
• Maximum Working Voltage: 300 V
• Drop in Replacement for S102C/K
• Matched sets are available per request
• For better performances please contact us
The Z-Foil technology provides a significant reduction of the
resistive component’s sensitivity to ambient temperature
variations (TCR) and applied power changes (PCR).
Designers can now guarantee a high degree of stability and
accuracy in fixed-resistor applications using solutions based
on Vishay’s revolutionary Z-Foil technology.
APPLICATIONS
• Precision Amplifiers, High Precision Instrumentation,
Medical and Automatic Test Equipment
• Laboratory, Audio (High End Stereo Equipment)
• EB Applications, Military, Airborne and Space
• Down-hole (High Temperature)
Our Application Engineering Department is available to
advise and to make recommendations. For non-standard
technical requirements and special applications, please
contact us.
FIGURE 1 - POWER DERATING CURVE
- 55 °C
+ 70 °C
200 %
175 %
150 %
125 %
100 %
75 %
50 %
25 %
0
Double Rated Power
TABLE 1 - TOLERANCE AND TCR VERSUS
TYPICAL TCR AND
STANDARD
TOLERANCE
MAXIMUM SPREAD
- ꢁꢁ /C TO + 12ꢁ /C
(+ 2ꢁ /C REFꢀ)
VALUE
Rated Power
Safe operation
for < 150 ppm
ΔR after
100 Ω to 100 kΩ
80 Ω to < 100 Ω
50 Ω to < 80 Ω
25 Ω to < 50 Ω
10 Ω to < 25 Ω
0.005 %
0.005 %
0.01 %
0.01 %
0.02 %
0.2 0.6 ppm/°C
0.2 0.8 ppm/°C
0.2 1.0 ppm/°C
0.2 1.3 ppm/°C
0.2 1.6 ppm/°C
2000 hours
load life
- 75 - 50 - 25
0
+ 25 + 50 + 75 + 100 + 125 + 150 + 175 + 200
Apbient Tepꢂerature (/C)
* Pb containing terminations are RoHS compliant, exemptions may apply
Document Number: 63113
Revision: 19-Apr-07
For any questions, contact: foil@vishay.com
www.vishay.com
1
Z201 (Z-Foil)
Ultra High Precision Z-Foil Resistor with TCR of
0.05 ppm/°C, PCR of 5 ppm at Rated Power, Tolerance
of 0.005 % and Load Life Stability of 0.005 %
Vishay Foil Resistors
FIGURE 2 - TRIMMING TO VALUES
FIGURE 3 - TYPICAL TCR CURVE Z-FOIL
(Conceptual Illustration)
+ ꢁ00
+ 400
+ 300
+ 200
Current Path
Before Trimming
Interloop Capacitance
Reduction in Series
+ 100
ΔR
0
- 100
- 200
- 300
- 400
- ꢁ00
R
Current Path
After Trimming
Trimming Process
(ꢂꢂp)
0ꢀ0ꢁ ꢂꢂpm/C
- 0ꢀ1 ꢂꢂpm/C 0ꢀ1 ꢂꢂpm/C
0ꢀ14 ꢂꢂpm/C
Mutual Inductance
Reduction due
to Change in
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Current Direction
- 0ꢀ16 ꢂꢂpm/C
0ꢀ2 ꢂꢂpm/C
Resistance
- ꢁꢁ
- 2ꢁ
0
+ 2ꢁ
+ 60 + 7ꢁ + 100 + 12ꢁ
Apbient Tepꢂerature (/C)
Note: Foil shown in black, etched spaces in white
FIGURE 4 - STANDARD IMPRINTING AND DIMENSIONS
Front View
Rear View
Optional Customer Part Number
Print specification, etc. if required
L
W
Date Code
Resistance
07
16
VISHAY
XXXX
Z201
XXXXXX
100R01
0.01%
Value Code
Year Week
H
Tolerance
*
ST
SW
LL
Model Name
LS
Lead Material #22 AWG
Round Solder Coated Copper
* The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board
when the standoffs are seated on the printed circuit board. This is to allow for proper cleaning of flux and other contaminants from the unit
after all soldering processes.
LS
W
L
H
ST
SW
LL
Inches 0.150 0.005
Z 201
mm
Inches 0.200 0.005
mm 5.08 0.13
3.81 0.13
0.105 0.010 0.300 0.010 0.326 0.010
2.67 0.25 7.62 0.25 8.28 0.25
0.010 min
0.254 min
0.035 0.01
1.02 0.13
1.000 0.125
25.4 3.18
Z 201 L
TABLE 2 - Z201 SPECIFICATIONS
Stability
0.005 % Max ΔR at 0.1 W/+ 70 °C
0.015 % Max ΔR at 0.3 W/+ 125 °C
0.01 % Max ΔR at 0.05 W/+ 125 °C
0.05 % Max ΔR at 0.3 W/+ 125 °C
Load Life at 2000 hours
Load Life at 10 000 hours
www.vishay.com
2
For any questions, contact: foil@vishay.com
Document Number: 63113
Revision: 19-Apr-07
Z201 (Z-Foil)
Ultra High Precision Z-Foil Resistor with TCR of
0.05 ppm/°C, PCR of 5 ppm at Rated Power, Tolerance
of 0.005 % and Load Life Stability of 0.005 %
Vishay Foil Resistors
TABLE 3 - ENVIRONMENTAL PERFORMANCE COMPARISON
VISHAY Z201
MIL-PRF-ꢁꢁ182
CHAR J
MAXIMUM ΔR
TYPICAL ΔR
Test Grouꢂ I
Thermal Shock
0.2 %
0.2 %
0.01 % (100 ppm)
0.01 % (100 ppm)
0.002 % (20 ppm)
0.003 % (30 ppm)
Short Time Overload
Test Grouꢂ II
Resistance Temperature
Characteristic
Low Temperature Storage
Low Temperature Operation
Terminal Strength
25 ppm/°C
see Table 1
0.05 ppm/°C
(0 °C to + 60 °C)
0.002 % (20 ppm)
0.002 % (20 ppm)
0.002 % (20 ppm)
0.15 %
0.15 %
0.2 %
0.01 % (100 ppm)
0.01 % (100 ppm)
0.01 % (100 ppm)
Test Grouꢂ III
DWV
0.15 %
0.1 %
0.4 %
0.01 % (100 ppm)
0.01 % (100 ppm)
0.05 % (500 ppm)
0.002 % (20 ppm)
0.005 % (50 ppm)
0.01 % (100 ppm)
Resistance to Solder Heat
Moisture Resistance
Test Grouꢂ IV
Shock
Vibration
0.2 %
0.2 %
0.01 % (100 ppm)
0.01 % (100 ppm)
0.002 % (20 ppm)
0.002 % (20 ppm)
Test Grouꢂ V
Life Test at 0.3 W/+ 125 °C
2000 hours
10 000 hours
0.5 %
2.0 %
0.015 % (150 ppm)
0.05 % (500 ppm)
0.01 % (100 ppm)
0.03 % (300 ppm)
Test Grouꢂ Va
Life Test at 0.6 W (2 x Rated Power)/+ 70 °C, 2000 hours
0.5 %
2.0 %
0.015 % (150 ppm)
0.1 % (1000 ppm)
< 0.00001 %/V
0.01 % (100 ppm)
0.05 % (500 ppm)
< 0.00001 %/V
Test Grouꢂ VI
High Temperature Exposure
Test Grouꢂ VII
Voltage Coefficient
0.005 %/V
STANDARD MEASUREMENT (at room temperature)
Standard Test Conditions:
• Temperature: + 23 °C 2 °C
• Relative humidity: 35 to 65 % RH
• Lead test point: 0.5" (12.7 mm) from resistor body
IMPROVED PERFORMANCE TESTING
The preceding information is based on product directly off the production line. Improved performance (meaning increased time
stability with load and other stresses) is available through factory conducted "Improved Performance Testing". The test routine
is usually tailored to the user’s stability objectives. A screened product can be brought down to a potential load life drift of less
than 50 ppm.
For example, the data sheet “7 Technical Reasons to Specify BMF Resistive Components” shows the drift characteristics of a
standard product.
Various screen test routines are available and all anticipated stresses must be taken into account before settling on one specific
test routine. Our Applications Engineering Department is available to discuss and recommend appropriate routines given the full
spectrum of anticipated stresses and stability requirements.
Document Number: 63113
Revision: 19-Apr-07
For any questions, contact: foil@vishay.com
www.vishay.com
3
Z201 (Z-Foil)
Ultra High Precision Z-Foil Resistor with TCR of
0.05 ppm/°C, PCR of 5 ppm at Rated Power, Tolerance
of 0.005 % and Load Life Stability of 0.005 %
Vishay Foil Resistors
TABLE 4 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y14ꢁ32ꢁ0R000V9L (ꢂreferred ꢂart nupber forpat)
DENOTES PRECISION
VALUE
AER*
Y
R = Ω
K = kΩ
0 = Standard
9 = Lead (Pb)-free
1 - 999 = Custom
Y
1
4
ꢁ
3
2
ꢁ
0
R
0
0
0
V
9
L
PRODUCT CODE
RESISTANCE TOLERANCE
PACKAGING
14ꢁ3 = Z201
14ꢁ4 = Z201L
V = 0.005 %
T = 0.01 %
Q = 0.02 %
A = 0.05 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1.0 %
L = Bulk
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1453 250R000 V 9 L:
TYPE: Z201
VALUE: 250.0 Ω
ABSOLUTE TOLERANCE: 0.005 %
TERMINATION: Lead (Pb)-free
PACKAGING: Bulk
HISTORICAL PART NUMBER: Z201T 2ꢁ0R00 V B (will continue to be used)
Z201
T
2ꢁ0R00
V
B
MODEL
TERMINATION
OHMIC VALUE
ABS. TOLERANCE
PACKAGING
B = Bulk
Z201
Z201L
T = Lead (Pb)-free
None = Tin/Lead
250.0 Ω
V = 0.005 %
T = 0.01 %
Q = 0.02 %
A = 0.05 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1.0 %
Note
* For non-standard requests, please contact Application Engineering.
www.vishay.com
4
For any questions, contact: foil@vishay.com
Document Number: 63113
Revision: 19-Apr-07
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
Z202
Ultra High Precision Z-Foil Miniature Resistor with TCR of ± 0.05 ppm/°C, PCR of 5 ppm at Rated Power and Tolerance to ± 0.01 %
VISHAY
Z20225K454AB
Ultra High Precision Z-Foil Miniature Resistor with TCR of ± 0.05 ppm/°C, PCR of 5 ppm at Rated Power and Tolerance to ± 0.01 %
VISHAY
Z20225K454BB
Ultra High Precision Z-Foil Miniature Resistor with TCR of ± 0.05 ppm/°C, PCR of 5 ppm at Rated Power and Tolerance to ± 0.01 %
VISHAY
Z20225K454CB
Ultra High Precision Z-Foil Miniature Resistor with TCR of ± 0.05 ppm/°C, PCR of 5 ppm at Rated Power and Tolerance to ± 0.01 %
VISHAY
Z20225K454DB
Ultra High Precision Z-Foil Miniature Resistor with TCR of ± 0.05 ppm/°C, PCR of 5 ppm at Rated Power and Tolerance to ± 0.01 %
VISHAY
Z20225K454FB
Ultra High Precision Z-Foil Miniature Resistor with TCR of ± 0.05 ppm/°C, PCR of 5 ppm at Rated Power and Tolerance to ± 0.01 %
VISHAY
Z20225K454QB
Ultra High Precision Z-Foil Miniature Resistor with TCR of ± 0.05 ppm/°C, PCR of 5 ppm at Rated Power and Tolerance to ± 0.01 %
VISHAY
Z20225K454TB
Ultra High Precision Z-Foil Miniature Resistor with TCR of ± 0.05 ppm/°C, PCR of 5 ppm at Rated Power and Tolerance to ± 0.01 %
VISHAY
Z20225K454VB
Ultra High Precision Z-Foil Miniature Resistor with TCR of ± 0.05 ppm/°C, PCR of 5 ppm at Rated Power and Tolerance to ± 0.01 %
VISHAY
©2020 ICPDF网 联系我们和版权申明