VSC7124XRY
更新时间:2024-09-18 13:11:41
品牌:VITESSE
描述:Telecom Circuit, 1-Func, CMOS, PQFP44, 10 X 10 MM, 1 MM HEIGHT, 0.80 MM PITCH, LEAD FREE, PLASTIC, MS-026, TQFP-44
VSC7124XRY 概述
Telecom Circuit, 1-Func, CMOS, PQFP44, 10 X 10 MM, 1 MM HEIGHT, 0.80 MM PITCH, LEAD FREE, PLASTIC, MS-026, TQFP-44 其他电信集成电路
VSC7124XRY 规格参数
生命周期: | Transferred | 零件包装代码: | QFP |
包装说明: | HTQFP, | 针数: | 44 |
Reach Compliance Code: | unknown | HTS代码: | 8542.39.00.01 |
风险等级: | 5.16 | Is Samacsys: | N |
JESD-30 代码: | S-PQFP-G44 | 长度: | 10 mm |
功能数量: | 1 | 端子数量: | 44 |
最高工作温度: | 95 °C | 最低工作温度: | |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | HTQFP |
封装形状: | SQUARE | 封装形式: | FLATPACK, HEAT SINK/SLUG, THIN PROFILE |
认证状态: | Not Qualified | 座面最大高度: | 1.2 mm |
标称供电电压: | 3.3 V | 表面贴装: | YES |
技术: | CMOS | 电信集成电路类型: | TELECOM CIRCUIT |
温度等级: | OTHER | 端子形式: | GULL WING |
端子节距: | 0.8 mm | 端子位置: | QUAD |
宽度: | 10 mm | Base Number Matches: | 1 |
VSC7124XRY 数据手册
通过下载VSC7124XRY数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载VITESSE
SEMICONDUCTOR CORPORATION
Advance Product Information
VSC7124
Quad Port Bypass Circuit
Features
• ANSI X3T11 Fibre Channel Compliant at 1.0625Gb/s
• 3.3V, 0.25W Typical Power
• IEEE 802.3z Gigabit Ethernet Compliant at 1.25Gb/s
• Five Port Bypass Circuits (PBCs)
• 0.35um CMOS, a Velocity Family Member
• 44-Pin, 10mm PQFP Package
• On-Chip Transmit Termination
General Description
The VSC7124 contains five cascaded Port Bypass Circuits (PBCs) used to steer serial signals. This part is typ-
ically used in distributing Fibre Channel signals to an array of disk drives in an FC-AL loop as illustrated in Fig-
ure 1. The VSC7124 can be used with any of the Vitesse JBOD circuits to implement FC-AL JBODs of
virtually any size. In Figure 1, the first VSC7127’s CRU is configured as a Repeater to attenuate jitter. The
VSC7124 does not contain a CRU in order to reduce power and cost. The second VSC7127’s CRU is config-
ured as a retimer so that the output of the device is a jitter compliance point.
Each PBC is a multiplexer that is controlled by the corresponding SELx line which, if HIGH, selects the exter-
nal input or, if LOW, selects the output of the previous PBC.
VSC7124 Block Diagram
1
0
1
0
1
0
1
0
1
0
PBC0
PBC1
PBC2
PBC3
PBC4
G52293-0, Rev 2.3
05/07/01
Page 1
© VITESSE SEMICONDUCTOR CORPORATION • 741 Calle Plano • Camarillo, CA 93012
Tel: (800) VITESSE • FAX: (805) 987-5896 • Email: prodinfo@vitesse.com
Internet: www.vitesse.com
VITESSE
SEMICONDUCTOR CORPORATION
Advance Product Information
Quad Port Bypass Circuit
VSC7124
Application Example
A 12-port JBOD is shown in Figure 1. This dual loop application uses one VSC7127R, one VSC7127T and one
VSC7124 on each loop in order to configure the FC-AL disk array. Functional drives are included in the FC-
AL loop while nonfunctional or missing drives (numbers 2, 7, 9) are excluded.
Figure 1: 12-Drive FC-AL JBOD Application
Optics
or
Copper
1
Retimer
LOOP A
Retimer
0
0
0
0
1
1
1
1
7125
SerDes
7125
1
0
0
0
0
1
1
1
1
0
SerDes
2
3
4
7125
SerDes
7125
3
2
SerDes
7125
SerDes
7125
4
CONFIGURATION:
VSC7127R #1 & 2: Repeater Mode
SEL0=1, SEL5=1
SerDes
1
0
0
0
0
1
1
1
1
7125
SerDes
7125
0
5
6
0
0
0
0
1
MODE=0
4
3
SerDes
7125
SerDes
7125
VSC7124 #3 & 4: No CRU
1
1
1
SerDes
VSC7127T #5 & 6: Retimer Mode
SEL1=1, SEL5=1
MODE=1
7
8
2
7125
SerDes
7125
1
SerDes
0
9
0
0
0
0
1
1
1
1
0
0
0
0
0
1
4
3
7125
SerDes
7125
10
11
12
1
1
1
SerDes
7125
SerDes
7125
2
SerDes
7125
SerDes
7125
Optics
or
Copper
1
SerDes
LOOP B
Repeater
Repeater
0
© VITESSE SEMICONDUCTOR CORPORATION • 741 Calle Plano • Camarillo, CA 93012
Tel: (800) VITESSE • FAX: (805) 987-5896 • Email: prodinfo@vitesse.com
Internet: www.vitesse.com
Page 2
G52293-0, Rev 2.3
5/7/01
VITESSE
SEMICONDUCTOR CORPORATION
Advance Product Information
VSC7124
Quad Port Bypass Circuit
Figure 2: Timing Waveforms
Ix+/-
Ox+/-
T1
T1
AC Characteristics (Over Recommended Operating Conditions)
Parameters
Description
Propagation Delay
Min
Typ
Max
Units
Conditions
Delay with all circuits
bypassed.
T1
7.0
ns
TR, TF
Tj(PBC)
Serial Data Rise and Fall Time
Data Jitter Accummulation
300
120
ps
ps
At ∆VIN minimum levels
Peak-to-Peak on Ox+/-
DC Characteristics (Over Recommended Operating Conditions)
Parameters
Description
Min
Typ
Max
Units
Conditions
IOH = -1.0 mA
VOH
VOL
VIH
VIL
IIH
Output HIGH voltage (TTL)
Output LOW voltage (TTL)
Input HIGH voltage (TTL)
Input LOW voltage (TTL)
Input HIGH current (TTL)
Input LOW current (TTL)
2.4
V
V
0.5
5.5
IOL = +1.0 mA
2.0
0
V
0.8
V
50
500
-500
µA
µA
VIN =2.4V
VIN =0.5V
IIL
TX output differential peak-to-peak
voltage swing
(1)
∆VOUT75
1200
2200
mVp-p 75Ω to VDD – 2.0 V
mVp-p 50Ω to VDD – 2.0 V
mVp-p Internally biased to VDD/2
TX output differential peak-to-peak
voltage swing
(1)
∆VOUT50
1000
2200
Receiver differential peak-to-peak
Input Sensitivity RX
(1)
∆VIN
400
2600
3.47
555
VDD
PD
Supply voltage
3.14
V
3.3V±5%
Outputs open,
VDD = VDD max ±2%
Power dissipation
250
76
mW
Outputs open,
VDD = VDD max
IDD
Power Supply Current
160
mA
NOTE: (1) Refer to Application Note AN-37 for details regarding differential voltage measurements.
G52293-0, Rev 2.3
05/07/01
Page 3
© VITESSE SEMICONDUCTOR CORPORATION • 741 Calle Plano • Camarillo, CA 93012
Tel: (800) VITESSE • FAX: (805) 987-5896 • Email: prodinfo@vitesse.com
Internet: www.vitesse.com
VITESSE
SEMICONDUCTOR CORPORATION
Advance Product Information
Quad Port Bypass Circuit
VSC7124
(1)
Absolute Maximum Ratings
TTL Power Supply Voltage (V )...................................................................................................... 0.5V to +4V
DD
PECL DC Input Voltage (V ) ............................................................................................. -0.5V to V +0.5V
INP
DD
TTL DC Input Voltage, (V ).......................................................................................................... -0.5V to 5.5V
INT
DC Voltage Applied to Outputs for High Output State (V
) ........................................ -0.5V to V + 0.5V
DD
IN TTL
TTL Output Current (I
), (DC, Output High)........................................................................................... 50mA
OUT
PECL Output Current (I
), (DC, Output High).......................................................................................-50mA
OUT
Case Temperature Under Bias, (T ).............................................................................................-55°C to +125°C
C
Storage Temperature (T
)........................................................................................................-65°C to + 150°C
STG
(2)
Recommended Operating Conditions
Power Supply Voltage (V ) . ......................................................................................................+3.14V to 3.47V
DD
Ambient Operating Temperature Range (T)....................................................................... 0°C to +85°C Ambient
NOTES: (1) CAUTION: Stresses listed under “Absolute Maximum Ratings” may be applied to devices one at a time without caus-
ing permanent damage. Functionality at or above the values listed is not implied. Exposure to these values for extended
periods may affect device reliability.
(2) Vitesse guarantees the functional and parametric operation of the part under “Recommended Operating Conditions”
except where specifically noted in the AC and DC Parametric tables.
© VITESSE SEMICONDUCTOR CORPORATION • 741 Calle Plano • Camarillo, CA 93012
Tel: (800) VITESSE • FAX: (805) 987-5896 • Email: prodinfo@vitesse.com
Internet: www.vitesse.com
Page 4
G52293-0, Rev 2.3
5/7/01
VITESSE
SEMICONDUCTOR CORPORATION
Advance Product Information
VSC7124
Quad Port Bypass Circuit
Package Pin Descriptions
Figure 3: Pin Diagram
43
41
39
37
35
33
31
29
27
25
23
VSS
VSS
VDD
I1-
1
VDD
O4+
O4-
3
I1+
VDDP4
I4+
5
VDDP1
O1-
VSC7124
I4-
7
O1+
VSS
VDDP0
O0-
9
I0-
O0+
N/C
I0+
11
VSS
13
15
17
19
21
Table 1: Pin Identifications
Pin #
Name
Description
4, 3, 41, 40
35, 34, 28, 27
10, 9
I1+, I1-, I2+, I2-
I3+, I3-, I4+, I4-
I0+, I 0-
INPUT - Differential, Internally Biased to VDD/2
Ix+/Ix- is the serial input to PBCx.
15, 16,
17, 18
14
SEL1, SEL2
SEL3, SEL4
SEL0
INPUT - TTL
Port Bypass Mux SELect lines. A HIGH selects Ix. A LOW selects the
output of the previous internal device.
7, 6, 44, 43
38, 37, 31, 30
24, 25
O1+, O1-, O2+, O2-
O3+, O3-, O4+, O4-
O0+, O0-
OUTPUT - Differential
Ox+/Ox- is the serial output from PBCx.
2, 21, 32
VDD
Digital Logic Power Supply.
5
VDDP1
VDDP2
VDDP3
VDDP4
VDDP0
Power Supply (3.3V) for O1+/-. If unused, connect to VSS.
Power Supply (3.3V) for O2+/-. If unused, connect to VSS.
Power Supply (3.3V) for O3+/-. If unused, connect to VSS.
Power Supply (3.3V) for O4+/-. If unused, connect to VSS.
Power Supply (3.3V) for O0+/-. If unused, connect to VSS
42
36
29
26
12, 13, 20, 22, 23
1, 8, 11, 19, 33, 39
N/C
Not Connected
Ground
VSS
G52293-0, Rev 2.3
05/07/01
Page 5
© VITESSE SEMICONDUCTOR CORPORATION • 741 Calle Plano • Camarillo, CA 93012
Tel: (800) VITESSE • FAX: (805) 987-5896 • Email: prodinfo@vitesse.com
Internet: www.vitesse.com
VITESSE
SEMICONDUCTOR CORPORATION
Advance Product Information
Quad Port Bypass Circuit
VSC7124
Package Information
44-Pin PQFP 10 x 10 mm
F
G
Item
mm
Tol.
44
34
A
D
E
F
G
H
I
2.45
2.00
MAX
+0.10
+.05
+.25
+.10
+.25
+.10
1
0.35
33
13.20
10.00
13.20
10.00
0.88
I
H
J
+.15 / -.10
BASIC
K
0.80
23
11
12
22
12o TYP
D
12o TYP
K
0.30 RAD. TYP.
A
0.25 MAX.
0.20 RAD. TYP.
0o- 8o
0.102 MAX. LEAD
COPLANARITY
0.17 MAX.
0.25
J1
J
E
NOTES:
Drawing not to scale.
Cavity up
All units in mm unless otherwise noted.
© VITESSE SEMICONDUCTOR CORPORATION • 741 Calle Plano • Camarillo, CA 93012
Tel: (800) VITESSE • FAX: (805) 987-5896 • Email: prodinfo@vitesse.com
Internet: www.vitesse.com
Page 6
G52293-0, Rev 2.3
5/7/01
VITESSE
SEMICONDUCTOR CORPORATION
Advance Product Information
VSC7124
Quad Port Bypass Circuit
Package Thermal Characteristics
The VSC7124 is packaged in a standard plastic quad flatpack, PQFP. This package adheres to industry-stan-
dard EIAJ footprints for a 10mm body, 44-pin PQFP. The package construction is shown in Figure 4. The 44-
pin PQFP with embedded slug has the thermal properties listed in Table 2.
Figure 4: Package Cross Section
Plastic Molding Compound
Lead
Die
Bond Wire
Table 2: 44 PQFP Thermal Resistance
Symbol
Description
Value
Units
θCA-0
Thermal resistance from case-to-ambient, still air
50
43
39
36
34
oC/W
oC/W
oC/W
oC/W
oC/W
θCA-100
θCA-200
θCA-400
θCA-600
Thermal resistance from case-to-ambient, 100 LFPM air
Thermal resistance from case-to-ambient, 200 LFPM air
Thermal resistance from case-to-ambient, 400 LFPM air
Thermal resistance from case-to-ambient, 600 LFPM air
o
The VSC7124 is designed to operate with an ambient temperature up to +70 C.
Moisture Sensitivity Level
This device is rated at a Moisture Sensitivity Level 3 rating with maximum floor life of 168 hours at 30ºC, 60%
relative humidity. Please refer to Application Note AN-20 for appropriate handling procedures.
G52293-0, Rev 2.3
05/07/01
Page 7
© VITESSE SEMICONDUCTOR CORPORATION • 741 Calle Plano • Camarillo, CA 93012
Tel: (800) VITESSE • FAX: (805) 987-5896 • Email: prodinfo@vitesse.com
Internet: www.vitesse.com
VITESSE
SEMICONDUCTOR CORPORATION
Advance Product Information
Quad Port Bypass Circuit
VSC7124
Ordering Information
The order number for this product is formed by a combination of the device number and package type.
XX
VSC7124
Device Type
Quad Port Bypass Circuit
Package
QM: 44-Pin PQFP, 10mm x 10mm
Marking Information
The package is marked with three lines of text as shown in Figure 5.
Figure 5: Package Marking Information
Pin 1 Identifier
VITESSE
VSC7124QM
Part Number
DateCode
Package Suffix
####AAAAA
Lot Tracking Code
(4 or 5 characters)
Notice
Vitesse Semiconductor Corporation (“Vitesse”) provides this document for informational purposes only. This document contains pre-production
information about Vitesse products in their concept, development and/or testing phase. All information in this document, including descriptions of
features, functions, performance, technical specifications and availability, is subject to change without notice at any time. Nothing contained in this
document shall be construed as extending any warranty or promise, express or implied, that any Vitesse product will be available as described or
will be suitable for or will accomplish any particular task.
Vitesse products are not intended for use in life support appliances, devices or systems. Use of a Vitesse product in such applications without writ-
ten consent is prohibited.
© VITESSE SEMICONDUCTOR CORPORATION • 741 Calle Plano • Camarillo, CA 93012
Tel: (800) VITESSE • FAX: (805) 987-5896 • Email: prodinfo@vitesse.com
Internet: www.vitesse.com
Page 8
G52293-0, Rev 2.3
5/7/01
VSC7124XRY 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
VSC7125 | VITESSE | 1.0625 Gbits/sec Fibre Channel Transceiver | 获取价格 | |
VSC7125QN | VITESSE | 1.0625 Gbits/sec Fibre Channel Transceiver | 获取价格 | |
VSC7125QP | ETC | Interface IC | 获取价格 | |
VSC7125QU | VITESSE | 1.0625 Gbits/sec Fibre Channel Transceiver | 获取价格 | |
VSC7126 | VITESSE | 1.0625 Gbits/sec Fibre Channel Transceiver | 获取价格 | |
VSC7126 | MICROSEMI | Telecom Circuit, 1-Func, PQFP80, 14 X 14 MM, PLASTIC, QFP-80 | 获取价格 | |
VSC7126QX | VITESSE | 1.0625 Gbits/sec Fibre Channel Transceiver | 获取价格 | |
VSC7127 | VITESSE | Family of Repeater/Retimer and Port Bypass Circuits for Fibre Channel | 获取价格 | |
VSC7127R | VITESSE | Family of Repeater/Retimer and Port Bypass Circuits for Fibre Channel | 获取价格 | |
VSC7127RXQM | VITESSE | Telecom IC | 获取价格 |
VSC7124XRY 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6