DV-704A [VPT]
HIGH RELIABILITY HYBRID EMI FILTERS;型号: | DV-704A |
厂家: | VPT, Inc. |
描述: | HIGH RELIABILITY HYBRID EMI FILTERS LTE |
文件: | 总11页 (文件大小:384K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HIGH RELIABILITY HYBRID
EMI FILTERS
DESCRIPTION
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
High Reliability
The DV-704A is a combined hybrid EMI filter and
voltage spike protection module that is operable over
the full military (-55 °C to +125 °C) temperature
range with no power derating. The DV-704A EMI
filter is designed to be used with VPT/Delta’s DVSA,
DVHF, DVTR, and DVFL series DC-DC converters to
comply with the surge requirements of MIL-STD-
704A, B, C, and D with 40 watts maximum output
power. This device also reduces the reflected noise
of the DC-DC converters to meet MIL-STD-461C
CE03 and MIL-STD-461D CE102 limits. It also
protects the DC-DC converters against the voltage
spikes specified in MIL-STD-461C CS06 and
conducted susceptibility in MIL-STD-461C CS01 and
CS02.
Up to 2.0 Amps Maximum Current
45 dB Minimum Attenuation at 500 kHz
Industry Standard Pinout
Inrush Current Limit and Soft Start
Under Voltage Lockout
Clamps Output Voltage to 45 Volts Maximum
Precision Seam Welded Hermetic Package
Custom Versions Available
Additional Environmental Screening Available
Meets MIL-STD-704A, B, C, and D Surge Limits
Compliant to MIL-STD-461C CE03 and MIL-
STD-461D CE102 EMC Requirements
Protects Against Conducted Susceptibility
Specified in MIL-STD-461C, CS01 and CS02
and Against Voltage Spikes Specified in MIL-
STD-461C CS06
•
These filters are designed and manufactured in a
facility qualified to ISO9001 and certified to MIL-
PRF-38534 and MIL-STD-883.
•
MIL-PRF-38534 Element Evaluated
Components
This product may incorporate one or more of the
following U.S. patents:
5,784,266
5,790,389
5,963,438
5,999,433
6,005,780
6,084,792
6,118,673
Figure 1 – DV-704A EMI Filter
(Exact marking may differ from that shown)
Sales Information:
Phone: (425) 353-3010
Fax: (425) 353-4030
E-mail: vptsales@vpt-inc.com
DV-704A-5.0
http://www.vpt-inc.com
1
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V 5%, Full Load, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous)
Input Voltage (Transient, up to 20µs)
Output Current3
40 VDC
Power Dissipation (Continuous)
Power Dissipation (Peak)
15 Watts
600 Volts
500 Watts
2.0 Amps
50 grams
1B
Storage Temperature
-65°C to +150°C
300°C
Weight (Maximum)
Lead Solder Temperature (10 seconds)
ESD Rating per MIL-PRF-38534
DV-704A
Parameter
STATIC
Conditions
Units
Min
Typ
Max
Continuous No Load
0
15
-
28
28
-
40
40
V
V
Continuous 2.0 A Load
INPUT
Voltage
Transient 100 ms, RS = 0.0 Ω
Transient2 60 ms, RS = 0.5 Ω
80
V
-
-
100
600
10
V
Transient
-
-
V
20 µs, RS = 50 Ω
No Load
-
-
mA
mA
Current1
OUTPUT
Voltage
Inhibited
-
-
2.0
Continuous
VOUT = VIN – (IIN x RDC
)
V
Current3,4
Continuous
0
-
-
14
-
2.0
16
A
V
Open Circuit
INHIBIT PIN VOLTAGE2
INHIBIT PIN CURRENT2
Inhibited
0
-
0.8
-300
14
V
Inhibit Pin Voltage = 0 to 0.8 V
-
µA
V
UNDERVOLTAGE LOCKOUT
OUTPUT CLAMP VOLTAGE
7.0
43
-
-
-
47
V
2.0 A Load, 80 V
-
100
80
ms
ms
µs
µs
INPUT SURGE LIMIT2
INPUT SPIKE LIMIT2
2.0 A Load, 100 V
-
-
2.0 A Load, 600 V, RS = 50 Ω
2.0 A Load, 400 V, RS = 0.5 Ω
-
-
20
-
-
20
VIN = 0 – 28V, No Load
CL = 100µF
INPUT INRUSH CURRENT2
DC RESISTANCE
-
0.25
0.5
APK
Continuous, Tcase= 25°C
Continuous
-
-
450
mΩ
W
-
-
-
15
POWER DISSIPATION
Peak
-
500
W
NOISE REJECTION
CAPACITANCE2
f = 500 kHz
45
-
-
20
-
-
-
-
dB
Pin to Case
nF
ISOLATION
Any Pin to Case, 500 VDC
AIF @ TC = 55°C
100
-
-
MΩ
MHrs
MTBF (MIL-HDBK-217F)
0.627
Notes: 1. Derate linearly to 0 at 135°C.
2. Verified by qualification testing.
3. Maximum output power is linearly derated to 0 A from +125°C to +135°C.
4. Rated current applies at any voltage.
DV-704A-5.0
2
BLOCK DIAGRAM
PIN 1
PROTECTION
SWITCH
28V IN
PIN 2
28V OUT
PIN 3
CASE
CONTROL
CIRCUIT
INHIBIT
IN COM
PIN 6
PIN 5
OUT COM
PIN 4
Figure 2
CONNECTION DIAGRAM
DVTR2800S DC-DC CONVERTER
1
5
6
3
4
28V IN
SYNC
+V OUT
+S
DV-704A EMI FILTER
1
6
5
2
9
28V IN
INH
28V OUT
LOAD
28 Vdc
2
+
-
INH
-S
4
10
IN COM OUT COM
3
IN COM OUT COM
7, 8
CASE
Figure 3 – DV-704A EMI Filter Hookup with Single Converter
DV-704A-5.0
3
INHIBIT DRIVE CONNECTION DIAGRAM
28V IN 1
100K
6.8V
OPTOISOLATOR
INH 6
BIAS
OPTIONAL
CAPACITOR
14V
IN COM 5
Figure 4 – Isolated Inhibit Drive
(Shown with optional capacitor for turn-on delay)
DV-704A-5.0
4
EMI MEASUREMENT METHODS CONNECTION DIAGRAMS
TO 50 OHM INPUT
+V IN
+V OUT
CURRENT
TRANSFORMER
10 uF
10 uF
TO D.U.T.
-V IN
-V OUT
Figure 5 – MIL-STD-461C Measurement Method (Feedthrough Capacitor)
+V IN
+V OUT
50 uH
TO 50 OHM INPUT
50 uH
-V IN
-V OUT
Figure 6 – MIL-STD-461D Measurement Method (LISN)
DV-704A-5.0
5
EMI PERFORMANCE CURVES
(TCASE = 25°C, VIN = +28V 5%, Full Load, Unless Otherwise Specified)
Figure 7 – MIL-STD-461C
Figure 8 – MIL-STD-461C
DVTR2800S With DV-704A EMI Filter
DVTR2800S Without EMI Filter
Figure 9 – MIL-STD-461D
DVTR2800S With DV-704A EMI Filter
DV-704A-5.0
6
PACKAGE SPECIFICATIONS (SEAM SEAL)
Pin
Function
Pin
Function
Pin
Function
1
2
28V IN
3
4
CASE
5
6
IN COM
INHIBIT
28V OUT
OUT COM
Figure 11 – Seam Seal Package and Pinout
DV-704A-5.0
7
PACKAGE PIN DESCRIPTION
Pin
1
Function
28V IN
Description
Positive Input Voltage Connection
Positive Output Voltage Connection
Case Connection
2
28V OUT
CASE
3
4
OUT COM
IN COM
Output Common Connection
Input Common Connection
5
Logic Low = Disabled Output. Connecting the inhibit pin to input common causes
filter shutdown.
Logic High = Enabled Output. Unconnected or open collector TTL.
6
INHIBIT
DV-704A-5.0
8
ENVIRONMENTAL SCREENING (100% Tested Per MIL-STD-883 as referenced to MIL-PRF-38534)
Extended
/ES
HB
/HB
Class H
/H
Class K
/K
Standard
(No Suffix)
Screening
MIL-STD-883
Non-
Destructive
Bond Pull
Method 2023
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Internal
Visual
Method 2017, 2032
Internal Procedure
Temperature
Cycling
Method 1010, Condition C
Method 1010, -55°C to 125°C
•
•
Constant
Acceleration
Method 2001, 3000g, Y1 Direction
Method 2001, 500g, Y1 Direction
PIND
Method 2020, Condition A2
Pre Burn-In
Electrical
100% at 25°C
•
•
Method 1015, 320 hours at +125°C
Method 1015, 160 hours at +125°C
96 hours at +125°C
•
•
•
•
Burn-In
•
•
24 hours at +125°C
•
•
Final
Electrical
MIL-PRF-38534, Group A1
100% at 25°C
•
Method 1014, Fine Leak, Condition A
Method 1014, Gross Leak, Condition C
Dip (1 x 10-3)
•
•
•
•
•
•
•
•
Hermeticity
•
•
Radiography
Method 20123
Method 2009
•
•
External
Visual
•
•
•
Notes:
1.
2.
3.
100% R&R testing at –55°C, +25°C, and +125°C with all test data included in product shipment.
PIND test Certificate of Compliance included in product shipment.
Radiographic test Certificate of Compliance and film(s) included in product shipment.
DV-704A-5.0
9
ORDERING INFORMATION
DV-704A
/HB
-
XXX
1
2
3
(1)
(2)
Screening Code1, 2
(3)
Product Series
Additional Screening Code
DV-704A
None
/ES
/HB
/H
Standard
Extended
HB
Class H
Class K
Contact Sales
/K
Notes:
1.
2.
Contact the VPT Inc. Sales Department for availability of Class H (/H) or Class K (/K) qualified products.
VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our
sole discretion unless specifically forbidden by customer contract.
Please contact your sales representative or the VPT Inc. Sales Department for more information
concerning additional environmental screening and testing, different input voltage, output voltage,
power requirement, source inspection, and/or special element evaluation for space or other higher
quality applications.
DV-704A-5.0
10
SMD (STANDARD MICROCIRCUIT DRAWING) NUMBERS
Standard Microcircuit
Drawing (SMD)
DV-704A Series
Similar Part Number
*T.B.D.
DV-704A/H
Do not use the DV-704A Series similar part number for SMD product acquisition. It is listed for
reference only. For exact specifications for the SMD product, refer to the SMD drawing. SMD’s can be
downloaded from the DLA Land and Maritime (Previously known as DSCC) website at
https://landandmaritimeapps.dla.mil/programs/defaultapps.asp. The SMD number listed above is for
MIL-PRF-38534 Class H screening, standard gold plated lead finish, and no RHA (Radiation Hardness
Assurance) level. Please reference the SMD for other screening levels, lead finishes, and radiation
levels. All SMD products are marked with a “Q” on the cover as specified by the QML certification mark
requirement of MIL-PRF-38534.
CONTACT INFORMATION
To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales
Department at:
Phone:
Fax:
E-mail:
(425) 353-3010
(425) 353-4030
vptsales@vpt-inc.com
All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors
or omissions. The products or specifications contained herein are subject to change without notice.
DV-704A-5.0
11
相关型号:
©2020 ICPDF网 联系我们和版权申明