DVME28 [VPT]
HIGH RELIABILITY HYBRID EMI FILTERS;型号: | DVME28 |
厂家: | VPT, Inc. |
描述: | HIGH RELIABILITY HYBRID EMI FILTERS LTE |
文件: | 总16页 (文件大小:249K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HIGH RELIABILITY HYBRID
EMI FILTERS
DESCRIPTION
FEATURES
•
•
High Reliability
Wide Input Voltage Range: 0 to 50 Volts per
MIL-STD-704
Up to 15.0 Amps Maximum Current
40 dB Minimum Attenuation at 500 kHz
Industry Standard Pinout
High Input Transient Voltage: 80 Volts for 1 sec
per MIL-STD-704A
Precision Seam Welded Hermetic Package
Custom Versions Available
The DVME series of hybrid EMI filters is operable
over the full military (-55 °C to +125 °C) temperature
range with no power derating. The DVME EMI filter
is designed to filter conducted emissions of two
DVFL series DC-DC converters.
•
•
•
•
These filters are designed and manufactured in a
facility qualified to ISO9001 and certified to MIL-
PRF-38534 and MIL-STD-883.
•
•
•
•
This product may incorporate one or more of the
following U.S. patents:
Additional Environmental Screening Available
Meets MIL-STD-461C and MIL-STD-461D EMC
Requirements
5,784,266
5,790,389
5,963,438
5,999,433
6,005,780
6,084,792
6,118,673
•
•
Protects Against Conducted Susceptibility
Specified in MIL-STD-461C, CS01 and CS02
MIL-PRF-38534 Element Evaluated
Components
Figure 1 – DVME28 EMI Filter
(Exact marking may differ from that shown)
Sales Information:
Phone: (425) 353-3010
Fax: (425) 353-4030
E-mail: vptsales@vptpower.com
http://www.vptpower.com
DVME28-6.0
1
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V 5%, Full Load, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous)
50 VDC
Storage Temperature
-65°C to +150°C
300°C
Input Voltage (Transient, 1 second)
80 Volts
Lead Solder Temperature (10 seconds)
Output Current
15.0 Amps
Weight (Maximum) – without Pin Extensions 83 grams
DVME28
Parameter
STATIC
Conditions
Units
Min
Typ
Max
Continuous
Transient, 1 sec
0
-
28
-
50
80
V
V
A
INPUT
Voltage2
Current1,2,3
Continuous
0
-
15.0
OUTPUT
Continuous
VOUT = VIN – (IIN x RDC
)
V
Voltage2
Current2,3
Continuous
0
-
-
15.0
A
mΩ
W
DC RESISTANCE
POWER DISSIPATION2
NOISE REJECTION
CAPACITANCE
Continuous
-
70
Continuous
-
-
15.75
f = 500 kHz
40
60
100
-
-
-
dB
Pin to Case
-
-
100
nF
ISOLATION
Any Pin to Case, 500 VDC
AIF @ TC = 55°C
-
-
MΩ
MHrs
MTBF (MIL-HDBK-217F)
0.957
Notes: 1. Derate linearly to 0 at 135°C.
2. Verified by qualification testing.
3. Rated current applies at any voltage.
BLOCK DIAGRAM
PINS 1, 2, 3
28V IN
PINS 10, 11, 12
28V OUT
CASE
IN COM
OUT COM
PINS 4, 5, 6
PINS 7, 8, 9
Figure 2
DVME28-6.0
2
CONNECTION DIAGRAMS
DVME28 EMI FILTER
1
DVFL2800S DC-DC CONVERTER
12
11
10
9
1
7
28V IN
28V IN
28V IN
28V OUT
28V OUT
28V OUT
28V IN
+V OUT
+S
2
3
10
28 Vdc
+
-
LOAD
4
5
6
6
4
2
12
9
SYNC IN
INH1
IN COM OUT COM
IN COM OUT COM
IN COM OUT COM
INH2
-S
8
7
8
IN COM OUT COM
3
CASE
Figure 3 – DVME28 EMI Filter Hookup with Single Converter
DVME28-6.0
3
CONNECTION DIAGRAMS
DVFL2800S DC-DC CONVERTER
1
7
28V IN
+V OUT
+S
10
LOAD
6
4
2
SYNC IN
INH1
9
8
-S
IN COM OUT COM
3
CASE
DVME28 EMI FILTER
DVFL2800S DC-DC CONVERTER
1
2
3
12
11
10
9
1
7
28V IN
28V IN
28V IN
28V OUT
28V OUT
28V OUT
28V IN
+V OUT
+S
10
28 Vdc
+
-
LOAD
4
5
6
6
4
2
SYNC IN
INH1
IN COM OUT COM
IN COM OUT COM
IN COM OUT COM
8
9
8
-S
7
IN COM OUT COM
3
CASE
Figure 4 – DVME28 EMI Filter Hookup with Two Converters
DVME28-6.0
4
EMI MEASUREMENT METHODS CONNECTION DIAGRAMS
TO 50 OHM INPUT
+V IN
+V OUT
CURRENT
TRANSFORMER
10 uF
10 uF
TO D.U.T.
-V IN
-V OUT
Figure 5 – MIL-STD-461C Measurement Method (Feedthrough Capacitor)
+V IN
+V OUT
50 uH
TO 50 OHM INPUT
50 uH
-V IN
-V OUT
Figure 6 – MIL-STD-461D Measurement Method (LISN)
DVME28-6.0
5
EMI PERFORMANCE CURVES
(TCASE = 25°C, VIN = +28V 5%, Full Load, Unless Otherwise Specified)
Figure 7 – MIL-STD-461C
Figure 8 – MIL-STD-461C
DVFL2800D With DVME28 EMI Filter
DVFL2800D Without EMI Filter
Figure 9 – MIL-STD-461D
DVFL2800S With DVME28 EMI Filter
DVME28-6.0
6
STANDARD PACKAGE DRAWINGS
3.005 76.33 MAX
2.760in 70.10mm
2.500in 63.50mm
0.400in 10.16mm MAX
0.050in 1.27mm
0.220in 5.59mm
12X PIN
0.040in 0.002
1.260in 32mm
1.02mm 0.05
1
2
3
4
5
6
12
11
10
9
1.130in 28.70mm
0.930in 23.62mm
0.730in 18.54mm
0.530in 13.46mm
0.330in 8.38mm
12X SEAL
0.100in 0.002
2.54mm 0.05
8
7
0.130in 3.30mm
0in 0mm
BASEPLATE
SURFACE
(BOTTOM)
0.120in 3.05mm
4X 0.128in 0.002
0.120in 3.05mm
3.25mm 0.05
0.230in 0.010 5.84mm 0.25
1. Tolerances are +0.005” unless otherwise stated
2. Case temperature is measured on the center of the baseplate surface
3. Mounting holes are not threaded. Recommended fastener is 4-40
4. Product Materials:
Case (Steel, gold over nickel plated); Cover (Kovar, nickel plated); Pin (Copper-cored alloy 52, gold over nickel plated); Pin Seals (Glass)
Pin
Function
Pin
Function
Pin
Function
Pin
Function
1
2
3
28V IN
28V IN
28V IN
4
5
6
IN COM
IN COM
IN COM
7
8
9
OUT COM
OUT COM
OUT COM
10
11
12
28V OUT
28V OUT
28V OUT
Figure 10 – Standard Package and Pinout
DVME28-6.0
7
STANDARD PACKAGE DRAWINGS
(3.524in [89.51] PIN EDGE TO PIN EDGE)
0.210in 5.33mm
BASEPLATE
SURFACE
(BOTTOM)
3.482in 88.44mm PIN CENTER TO PIN CENTER
1
2
3
4
5
6
12
11
10
9
12X PIN
0.040" 0.002"
[1.02mm]
8
7
0.073in 1.84mm
REFERENCE
0.361in 9.17mm REFERENCE
0.187in 4.75mm
0.321in 8.14mm
1. Tolerances are +0.005” unless otherwise stated
2. Case temperature is measured on the center of the baseplate surface
3. Mounting holes are not threaded. Recommended fastener is 4-40
4. Product Materials:
Case (Steel, gold over nickel plated); Cover (Kovar, nickel plated); Pin (Copper-cored alloy 52, gold over nickel plated); Pin Seals (Glass)
5. Pin Extension Materials:
Body (Diallyl-Phthalate/DAP, WH-9100-BLK F-Type or equivalent), Pins (Copper Alloy, Sn90/Pb10 solder plated)
Pin
Function
Pin
Function
Pin
Function
Pin
Function
1
2
3
28V IN
28V IN
28V IN
4
5
6
IN COM
IN COM
IN COM
7
8
9
OUT COM
OUT COM
OUT COM
10
11
12
28V OUT
28V OUT
28V OUT
Figure 11 – Standard Package with Down-Leads and Pinout
DVME28-6.0
8
STANDARD PACKAGE DRAWINGS
(3.524in [89.51] PIN EDGE TO PIN EDGE)
0.210in 5.33mm
3.482in 88.44mm PIN CENTER TO PIN CENTER
BASEPLATE
SURFACE
(BOTTOM)
1
2
3
4
5
6
12
11
10
9
12X PIN
0.040" 0.002"
[1.02mm]
8
7
0.368in 9.33mm
REFERENCE
0.321in 8.14mm
0.361in 9.17mm
0.187in 4.75mm
1. Tolerances are +0.005” unless otherwise stated
2. Case temperature is measured on the center of the baseplate surface
3. Mounting holes are not threaded. Recommended fastener is 4-40
4. Product Materials:
Case (Steel, gold over nickel plated); Cover (Kovar, nickel plated); Pin (Copper-cored alloy 52, gold over nickel plated); Pin Seals (Glass)
5. Pin Extension Materials:
Body (Diallyl-Phthalate/DAP, WH-9100-BLK F-Type or equivalent), Pins (Copper Alloy, Sn90/Pb10 solder plated)
Pin
Function
Pin
Function
Pin
Function
Pin
Function
1
2
3
28V IN
28V IN
28V IN
4
5
6
IN COM
IN COM
IN COM
7
8
9
OUT COM
OUT COM
OUT COM
10
11
12
28V OUT
28V OUT
28V OUT
Figure 12 – Standard Package with Up-Leads and Pinout
DVME28-6.0
9
FLANGED PACKAGE DRAWINGS
0.400in 10.16mm MAX
0.220in 5.59mm
4X 0.142in 0.003
3.61mm 0.08
2.500in 63.50mm
4X 0.250in 6.35mm
0.050in 1.27mm
1.750in 44.45mm
1.625in 41.28mm
12X PIN
0.040in 0.002
1
2
3
4
12
11
1.250in 31.75mm
1.050in 26.67mm
0.850in 21.59mm
0.650in 16.51mm
0.450in 11.43mm
0.250in 6.35mm
1.02mm 0.05
12X SEAL
0.100in 0.002
10
9
2.54mm 0.05
5
6
8
7
BASEPLATE
SURFACE
(BOTTOM)
0in 0mm
0.125in 3.18mm
0.250in 6.35mm
0.230in 0.010 5.84mm 0.25
1. Tolerances are +0.005” unless otherwise stated
2. Case temperature is measured on the center of the baseplate surface
3. Mounting holes are not threaded. Recommended fastener is 4-40
4. Product Materials:
Case (Steel, gold over nickel plated); Cover (Kovar, nickel plated); Pin (Copper-cored alloy 52, gold over nickel plated); Pin Seals (Glass)
Pin
Function
Pin
Function
Pin
Function
Pin
Function
1
2
3
28V IN
28V IN
28V IN
4
5
6
IN COM
IN COM
IN COM
7
8
9
OUT COM
OUT COM
OUT COM
10
11
12
28V OUT
28V OUT
28V OUT
Figure 14 – Flanged Package and Pinout
DVME28-6.0
10
FLANGED PACKAGE DRAWINGS
(2.845in [72.26] PIN EDGE TO PIN EDGE)
2.800in 71.12mm PIN CENTER TO PIN CENTER
0.825in 20.96mm
1.150in 29.21mm
0.100in 2.54mm
BASEPLATE
SURFACE
(BOTTOM)
12X PIN
0.040" 0.002"
[1.02mm]
0.401in 10.19mm
0.525in 13.34mm
1.750in 44.45mm
0.130in 3.30mm
0.318in 8.08mm
REFERENCE
1. Tolerances are +0.005” unless otherwise stated
2. Case temperature is measured on the center of the baseplate surface
3. Mounting holes are not threaded. Recommended fastener is 4-40
4. Product Materials:
Case (Steel, gold over nickel plated); Cover (Kovar, nickel plated); Pin (Copper-cored alloy 52, gold over nickel plated); Pin Seals (Glass)
5. Pin Extension Materials:
Body (Diallyl-Phthalate/DAP, WH-9100-BLK F-Type or equivalent), Pins (Copper Alloy, Sn90/Pb10 solder plated)
Pin
Function
Pin
Function
Pin
Function
Pin
Function
1
2
3
28V IN
28V IN
28V IN
4
5
6
IN COM
IN COM
IN COM
7
8
9
OUT COM
OUT COM
OUT COM
10
11
12
28V OUT
28V OUT
28V OUT
Figure 15 – Flanged Package with Down-Leads and Pinout
DVME28-6.0
11
FLANGED PACKAGE DRAWINGS
(2.845in [72.26] PIN EDGE TO PIN EDGE)
2.800in 71.12mm PIN CENTER TO PIN CENTER
0.825in 20.96mm
1.150in 29.21mm
0.100in 2.54mm
1
2
3
4
5
6
12
11
10
9
BASEPLATE
SURFACE
(BOTTOM)
8
7
12X PIN
0.040" 0.002"
[1.02mm]
0.379in 9.63mm
REFERENCE
0.525in 13.34mm
1.750in 44.45mm
0.130in 3.30mm
0.462in 11.73mm
1. Tolerances are +0.005” unless otherwise stated
2. Case temperature is measured on the center of the baseplate surface
3. Mounting holes are not threaded. Recommended fastener is 4-40
4. Product Materials:
Case (Steel, gold over nickel plated); Cover (Kovar, nickel plated); Pin (Copper-cored alloy 52, gold over nickel plated); Pin Seals (Glass)
5. Pin Extension Materials:
Body (Diallyl-Phthalate/DAP, WH-9100-BLK F-Type or equivalent), Pins (Copper Alloy, Sn90/Pb10 solder plated)
Pin
Function
Pin
Function
Pin
Function
Pin
Function
1
2
3
28V IN
28V IN
28V IN
4
5
6
IN COM
IN COM
IN COM
7
8
9
OUT COM
OUT COM
OUT COM
10
11
12
28V OUT
28V OUT
28V OUT
Figure 16 – Flanged Package with Up-Leads and Pinout
DVME28-6.0
12
PACKAGE PIN DESCRIPTION
Pins
1, 2, 3
Function
28V IN
Description
Positive Input Voltage Connection
Input Common Connection
Output Common Connection
Positive Output Voltage Connection
4, 5, 6
IN COM
7, 8, 9
OUT COM
28V OUT
10, 11, 12
DVME28-6.0
13
ENVIRONMENTAL SCREENING (100% Tested Per MIL-STD-883 as referenced to MIL-PRF-38534)
No Suffix
(Standard)
Non-QML
⑤
/ES
(Extended)
Non-QML
⑤
/HB
(HB)
Non-QML
⑤
/KB
(KB)
Non-QML
⑤
/H
(Class H)
⑧
/K
(Class K)
⑧
MIL-STD-883
Test Method, Condition
Test
TM2010, TM2017, TM2032
(MIL-STD-750, TM2072,
TM2073)
Internal
Visual
●
●
●
●
●
●
●
●
●
●
●
●
●
●
TM1010, Condition C
-65°C to 150°C, Ambient
TM1010, Condition B
-55°C to 125°C, Ambient
Temperature
Cycling
●
●
TM2001, 3000g, Y1 Direction
Constant
Acceleration
TM2001, 500g,
Y1 Direction
PIND ⑥
TM2020, Condition A
25°C
●
●
Pre Burn-In
Electrical
●
●
●
●
TM1015, 320 hrs,
125°C, Case Typ
TM1015, 160 hrs,
125°C, Case Typ
●
●
●
●
Burn-In
96 hrs, 125°C, Case Typ
24 hrs, 125°C, Case Typ
●
●
MIL-PRF-38534, Group A
Subgroups 1-6
●
●
-55°C, 25°C, 125°C ③
Final
Electrical
MIL-PRF-38534, Group A
Subgroups 1 and 4
25°C
●
●
TM1014, Fine Leak,
Condition A2 or B1
●
●
●
●
●
●
●
●
●
●
Hermeticity
(Seal)
TM1014, Gross Leak,
Condition C or B2
Gross Leak, Dip (1 x 10-3)
●
●
Radiography
⑦
TM2012
TM2009
●
●
●
●
External
Visual
●
●
●
Notes:
①
②
Contact Sales for more information concerning additional environmental screening and testing options desired.
VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our sole discretion unless
specifically forbidden by customer contract.
100% R&R testing with all test data included in product shipment.
Note intentionally not used.
Non-QML products may not meet all requirements of MIL-PRF-38534.
PIND test Certificate of Compliance included in product shipment.
③
④
⑤
⑥
⑦
⑧
Radiographic test Certificate of Compliance and film(s) or data CD included in product shipment.
QML screening levels are not available for products with Up-Leaded or Down-Leaded pin extensions added.
DVME28-6.0
14
ORDERING INFORMATION
DVME
28
F
DL
/H
-
XXX
1
2
3
4
5
6
(1)
(2)
(3)
Nominal Input
Voltage
Product Series
Package Option
DVME
28
28 Volts
None
F
Standard
Flanged
(4)
(5)
Screening Code1, 2, 3
(6)
Additional
Screening
Code
Package Lead Option
None
DL
UL
No Lead Extensions
Down-Lead
Up-Lead
None
/ES
/HB
/H
/KB
/K
Standard
Extended
HB
Class H
KB
Class K
Contact Sales
Notes:
1.
2.
Contact the VPT Inc. Sales Department for availability of Class H (/H) or Class K (/K) qualified products.
VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our
sole discretion unless specifically forbidden by customer contract.
3.
Class H and Class K not available for DL and UL Package Lead Options.
Please contact your sales representative or the VPT Inc. Sales Department for more information
concerning additional environmental screening and testing, different input voltage, output voltage,
power requirement, source inspection, and/or special element evaluation for space or other higher
quality applications.
DVME28-6.0
15
DSCC DRAWING NUMBER
DVME28 Series
Similar Part Number
DSCC Drawing
07004-01HXC
07004-01HXA
07004-01KXC
07004-01KXA
DVME28/H
DVME28/H-E
DVME28/K
DVME28/K-E
07004-01HYC
07004-01HYA
07004-01KYC
07004-01KYA
DVME28F/H
DVME28F/H-E
DVME28F/K
DVME28F/K-E
Do not use the DVME28 Series similar part number for SMD product acquisition. It is listed for
reference only. For exact specifications for the SMD product, refer to the SMD drawing. SMDs can be
downloaded from the DLA Land and Maritime (Previously known as DSCC) website at
https://landandmaritimeapps.dla.mil/programs/defaultapps.asp. The SMD number listed above
represents the Federal Stock Class, Device Type, Device Class Designator, Case Outline, Lead Finish
and RHA Designator (where applicable). Please reference the SMD for other screening levels, lead
finishes, and radiation levels. All SMD products are marked with a “Q” on the cover as specified by the
QML certification mark requirement of MIL-PRF-38534.
CONTACT INFORMATION
To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales
Department at:
Phone:
Fax:
E-mail:
(425) 353-3010
(425) 353-4030
vptsales@vpt-power.com
All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors
or omissions. The products or specifications contained herein are subject to change without notice.
DVME28-6.0
16
相关型号:
©2020 ICPDF网 联系我们和版权申明