DCMHIR20-48S24P [WALL]
DC-DC Regulated Power Supply Module,;型号: | DCMHIR20-48S24P |
厂家: | WALL INDUSTRIES,INC. |
描述: | DC-DC Regulated Power Supply Module, |
文件: | 总8页 (文件大小:747K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DCMHIR20 SERIES
Up to 20 Watts
Rev B
DC/DC Converter
Single and Dual Output
FEATURES
• 4:1 Input Range or 2:1 Input Range
• 5000VAC Reinforced Insulation
• Low Leakage Current
• Over Voltage, Over Load, Over Temperature,
and Short Circuit Protection
• Non-Conductive Black Plastic Case
• RoHS & REACH Compliant
• Low Standby Power
• Internal EN55032 Class A Filter
• No Minimum Load Required
• Remote ON/OFF Positive or Negative Logic
• 2xMOPP
• IEC/EN/ANSI/AAMI ES 60601-1 UL: E360199
and IEC/EN/UL 60950-1, 62368-1 UL: E193009
and CB: UL (Demko) Safety Approvals
Size: 1.6in x 1in x 0.40in
(40.6mm x 25.4mm x 10.2mm)
• 5000 Meter Operating Altitude
APPLICATIONS
DESCRIPTION
• Medical
• PV
• Automation
• Datacom
• IPC
• Industry
• Measurement
• Telecom
The DCMHIR20 series of DC/DC converters offers up to 15 watts of output power in a very
compact 1.6” x 1” x 0.40” through hole package. This series consists of single and dual output
models with either a 2:1 input range or 4:1 input range. Each model features low leakage current
and standby power, 5000VAC reinforced isolation, no minimum load requirement, and remote
on/off with positive or negative logic. The DCMHIR15 series also has protection against over
voltage, over load, over temperature, and short circuit conditions and is RoHS and REACH
compliant. This series has IEC/EN/ANSI/AAMI ES 60601-1 UL E360199 and IEC/EN/UL 60950-1,
62368-1 UL: E193009 and CB: UL (Demko) safety approvals.
MODEL SELECTION TABLE
Single Output Models
Output
Voltage
5VDC
12VDC
15VDC
24VDC
5VDC
12VDC
15VDC
24VDC
5VDC
12VDC
15VDC
24VDC
5VDC
12VDC
15VDC
24VDC
5VDC
12VDC
15VDC
24VDC
Output
Current
4000mA
1670mA
1330mA
833mA
No Load Input
Current
8mA
Maximum
Capacitive Load
5000µF
850µF
Model Number
Input Voltage Range
Ripple & Noise
Efficiency Output Power
88.5%
DCMHIR20-12S05
DCMHIR20-12S12
DCMHIR20-12S15
DCMHIR20-12S24
DCMHIR20-24S05
DCMHIR20-24S12
DCMHIR20-24S15
DCMHIR20-24S24
DCMHIR20-244S05
DCMHIR20-244S12
DCMHIR20-244S15
DCMHIR20-244S24
DCMHIR20-48S05
DCMHIR20-48S12
DCMHIR20-48S15
DCMHIR20-48S24
DCMHIR20-484S05
DCMHIR20-484S12
DCMHIR20-484S15
DCMHIR20-484S24
50mVp-p
75mVp-p
75mVp-p
100mVp-p
50mVp-p
75mVp-p
75mVp-p
100mVp-p
50mVp-p
75mVp-p
75mVp-p
100mVp-p
50mVp-p
75mVp-p
75mVp-p
100mVp-p
50mVp-p
75mVp-p
75mVp-p
100mVp-p
12VDC
(9~18VDC)
12mA
13mA
11mA
8mA
88.5%
Up to 20 Watts
89%
700µF
220µF
5000µF
850µF
700µF
220µF
5000µF
850µF
700µF
220µF
5000µF
850µF
700µF
220µF
5000µF
850µF
89%
90%
4000mA
1670mA
1330mA
833mA
24VDC
(18~36VDC)
9mA
9mA
9mA
90%
Up to 20 Watts
90%
90%
88.5%
4000mA
1670mA
1330mA
833mA
4000mA
1670mA
1330mA
833mA
8mA
24VDC
(9~36VDC)
11mA
10mA
10mA
9mA
9mA
9mA
88.5%
Up to 20 Watts
89%
88.5%
89.5%
48VDC
(36~75VDC)
88.5%
Up to 20 Watts
89%
9mA
88.5%
89.5%
88.5%
89%
88.5%
4000mA
1670mA
1330mA
833mA
9mA
9mA
9mA
9mA
48VDC
(18~75VDC)
Up to 20 Watts
700µF
220µF
MODEL SELECTION TABLE
Dual Output Models
Output
Voltage
±5VDC
±12VDC
±15VDC
±5VDC
±12VDC
±15VDC
±5VDC
±12VDC
±15VDC
±5VDC
±12VDC
±15VDC
±5VDC
±12VDC
±15VDC
Output
Current
No Load Input
Current
11mA
11mA
14mA
11mA
9mA
Maximum
Capacitive Load
±2500µF
±500µF
Model Number
Input Voltage Range
Ripple & Noise
Efficiency Output Power
86%
DCMHIR20-12D05
DCMHIR20-12D12
DCMHIR20-12D15
DCMHIR20-24D05
DCMHIR20-24D12
DCMHIR20-24D15
DCMHIR20-244D12
DCMHIR20-244D15
DCMHIR20-244D24
DCMHIR20-48D05
DCMHIR20-48D12
DCMHIR20-48D15
DCMHIR20-484D05
DCMHIR20-484D12
DCMHIR20-484D15
±2000mA
±833mA
±667mA
±2000mA
±833mA
±667mA
±2000mA
±833mA
±667mA
±2000mA
±833mA
±667mA
±2000mA
±833mA
±667mA
50mVp-p
75mVp-p
75mVp-p
50mVp-p
75mVp-p
75mVp-p
50mVp-p
75mVp-p
75mVp-p
50mVp-p
75mVp-p
75mVp-p
50mVp-p
75mVp-p
75mVp-p
12VDC
(9~18VDC)
89%
89%
Up to 20 Watts
Up to 20 Watts
Up to 20 Watts
Up to 20 Watts
Up to 20 Watts
±350µF
±2500µF
±500µF
±350µF
±2500µF
±500µF
±350µF
±2500µF
±500µF
±350µF
±2500µF
±500µF
86%
90%
24VDC
(18~36VDC)
11mA
9mA
10mA
11mA
9mA
90%
86%
24VDC
(9~36VDC)
88.5%
89%
86%
48VDC
(36~75VDC)
9mA
9mA
9mA
9mA
88.5%
89%
86%
88.5%
89%
48VDC
(18~75VDC)
9mA
±350µF
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
5/20/2019
Page 1 of 8
DCMHIR20 SERIES
Up to 20 Watts
Rev B
DC/DC Converter
Single and Dual Output
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Full Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
12Vin(nom)
2:1 24Vin(nom)
48Vin(nom)
9
12
24
48
24
48
18
36
75
36
75
9
18
36
9
18
36
9
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
Input Voltage Range
Start-Up Voltage
24Vin(nom)
48Vin(nom)
4:1
18
12Vin(nom)
2:1 24Vin(nom)
48Vin(nom)
24Vin(nom)
48Vin(nom)
4:1
18
12Vin(nom)
2:1 24Vin(nom)
48Vin(nom)
7.8
15.8
32
7.8
15.8
8
8.6
17.4
34
8.6
17.4
25
50
100
50
16
33
8
Shutdown Voltage
Input Surge Voltage
24Vin(nom)
48Vin(nom)
4:1
16
12Vin(nom)
2:1 24Vin(nom)
48Vin(nom)
3 Seconds, Max.
24Vin(nom)
48Vin(nom)
3 Seconds, Max.
No Load
4:1
100
Input Current
See Table
Input Filter
Pi Type
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Voltage Accuracy
-1.0
-0.2
-0.5
-0.2
-1.0
-10
+1.0
%
%
Single Outputs
+0.2
+0.5
+0.2
+1.0
+10
Line Regulation
Low Line to High Line, Full Load
No Load to Full Load
Dual Outputs
Single Outputs
Dual Outputs
5Vout, 12Vout
15Vout, 24Vout
Dual Outputs
Load Regulation
Voltage Adjustability
%
Single Outputs
%
%
-10
-5.0
+20
+5.0
Cross Regulation
Output Power
Asymmetrical load 25%/100% FL
See Table
Output Current
Maximum Capacitive Load
See Table
See Table
With a 10µF/25V X7R MLCC
With a 10µF/25V X7R MLCC
With a 10µF/25V X7R MLCC
5Vout
50
75
75
100
50
75
12Vout
15Vout
24Vout
±5Vout
±12Vout
±15Vout
Ripple & Noise (20MHz bandwidth) With a 4.7µF/50V X7R MLCC
With a 10µF/25V X7R MLCC
mVp-p
With a 10µF/25V X7R MLCC
With a 10µF/25V X7R MLCC
75
Transient Response Recovery Time 25% Load Step Change
250
30
30
µs
mS
Power Up
Remote ON/OFF
60
60
Start-Up Time
Constant Resistive Load
Temperature Coefficient
-0.02
-0.5
+0.02
%/ºC
REMOTE ON/OFF CONTROL(1) (Optional)
DC-DC ON
Open or 3.5~12VDC
Short or 0~1.2VDC
Short or 0~1.2VDC
Open or 3.5~12VDC
1
Positive Logic
Negative Logic
DC-DC OFF
DC-DC ON
DC-DC OFF
Input Current of CTRL Pin
Remote OFF Input Current
PROTECTION
mA
mA
2.5
Short Circuit Protection
Over Load Protection
Continuous, Automatic Recovery
% of Iout rated; Hiccup Mode
Zener Diode Clamp
150
6.2
15
185
%
VDC
ºC
5Vout
12Vout
15Vout
24Vout
Over Voltage Protection
20
30
Over Temperature Protection
115
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
5/20/2019
Page 2 of 8
DCMHIR20 SERIES
Up to 20 Watts
Rev B
DC/DC Converter
Single and Dual Output
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
ENVIRONMENTAL SPECIFICATIONS
TEST CONDITIONS
Min
-40
-55
5
Typ
Max
Unit
Operating Ambient Temperature
Maximum Case Temperature
Storage Temperature
Thermal Impedance
Relative Humidity
Thermal Shock
Vibration
Operating Altitude
MTBF
With Derating
+105
+105
+125
ºC
ºC
ºC
ºC/W
%RH
14.36
95
MIL-STD-810F
MIL-STD-810F
5000
m
Hours
MIL-HDBK-217F, Full Load
1,712,000
GENERAL SPECIFICATIONS
Efficiency
See Table
Switching Frequency
Isolation Voltage
Isolation Capacitance
Leakage Current
225
5000
250
285
kHz
VAC
pF
1 minute, Input to Output, Reinforced insulation for 250VAC working voltage
240VAC, 60Hz
20
2
2.5
µA
Clearance/Creepage
PHYSICAL SPECIFICATIONS
Weight
8
mm
0.85oz (24g)
1.6in x 1in x 0.40in
Dimensions (L x W x H)
(40.6mm x 25.4mm x 10.2mm)
Non-Conductive Black Plastic
Non-Conductive Black Plastic
Silicone (UL94 V-0)
Case Material
Base Material
Potting Material
SAFETY CHARACTERISTICS
IEC/EN/ANSI/AAMI ES 60601-1
IEC/EN/UL 60950-1, 62368-1
UL:E360199
Safety Approvals(3)
UL:E193009
CB:UL (Demko)
Class A
Without External Components
With External Components
EN55011, EN55032, and FCC
Part 18
EMI
Class B
ESD
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
Air ± 15kV and Contact ±8kV
10 V/m
±2kV
±2kV
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Radiated Immunity
Fast Transient(2)
Surge(2)
Conducted Immunity
Power Frequency Magnetic Field
10 Vr.m.s
100A/m continuous; 1000A/m 1 Second
NOTES
1. Referred to –Vin pin.
To order positive logic remote on/off, add the suffix “P” to the model number.
To order negative logic remote on/off, add the suffix “R” to the model number.
2.
-
-
-
DCMHIR15-12xxx: With 2pcs of aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ36A, 36V,
3000 Watt peak pulse power) in parallel.
DCMHIR15-24xxxx: With 2pcs of aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ58A, 58V,
3000 Watt peak pulse power) in parallel.
DCMHIR15-48xxxx: With 2pcs of aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ120A, 120V,
3000 Watt peak pulse power) in parallel.
3. This product is Listed to applicable standards and requirements by UL.
CAUTION: Power modules not internally fused. An input line fuse must always be used.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
5/20/2019
Page 3 of 8
DCMHIR20 SERIES
Up to 20 Watts
Rev B
DC/DC Converter
Single and Dual Output
CHARACTERISTIC CURVES
DCMHIR20-244xxx Derating Curve
DCMHIR20-484xxx Derating Curve
DCMHIR20-244S05
DCMHIR20-244S05
Efficiency vs. Input Voltage
Efficiency vs. Output Load
FUSE CONSIDERTION
This power module is not internally fused. An input line fuse must always be used.
This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of
sophisticated power architecture.
To maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse.
The input line fuse suggestion is below:
Model
Fuse Rating
Fuse Type
Slow-Blow
Slow-Blow
Slow-Blow
DCMHIR20-12xxx, DCMHIR20-244xxx
DCMHIR20-24xxx, DCMHIR20-484xxx
DCMHIR20-48xxx
4A
2A
1A
The table is based on information provided in the data sheet on inrush energy and maximum DC input current at low Vin.
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
5/20/2019
Page 4 of 8
DCMHIR20 SERIES
Up to 20 Watts
Rev B
DC/DC Converter
Single and Dual Output
MECHANICAL DRAWINGS
Pin Connection
SINGLE
+Vin
PIN
1
DUAL
+Vin
2
-Vin
-Vin
3
4
Ctrl (Option)
+Vout
Ctrl (Option)
+Vout
5
6
-Vout
Trim
Common
-Vout
Notes:
1. All dimensions in inch [mm]
2. Tolerance: x.xx±0.02 [x.x±0.5]
x.xxx±0.010 [x.xx±0.25]]
3. Pin dimension tolerance ±0.004 [0.10]
RECOMMENDED PAD LAYOUT
Note:
All dimensions in inch [mm]
Pad size (lead free recommended)
Through hole 1.2.3.4.5.6: Ø0.051[1.30]
Top view pad 1.2.3.4.5.6: Ø0.064[1.63]
Bottom view pad 1.2.3.4.5.6: Ø0.102[2.60]
THERMAL CONSIDERATIONS
The power module operates in a variety of thermal environments.
However, sufficient cooling should be provided to help ensure reliable operation of the unit.
Heat is removed by conduction, convection, and radiation, to the surrounding environment.
Proper cooling can be verified by measuring the point in the figure below.
The temperature at this location should not exceed “Maximum Case Temperature”.
When operating, adequate cooling must be provided to maintain the test point temperature at or below “Maximum case temperature”.
You can limit this temperature to a lower value for extremely high reliability.
▪ Thermal test condition with vertical direction by natural convection (20LFM).
Top View
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
5/20/2019
Page 5 of 8
DCMHIR20 SERIES
Up to 20 Watts
Rev B
DC/DC Converter
Single and Dual Output
OUTPUT VOLTAGE ADJUSTMENT
It allows the user to increase or decrease the output voltage of the module.
This is accomplished by connecting an external resistor between the Trim pin and either the +Vout or –Vout pins.
With an external resistor between the Trim and –Output pin, the output voltage increases.
With an external resistor between the Trim and +Output pin, the output voltage decreases.
The external Trim resistor needs to be at least 1/16W of rated power.
▪Trim Up Equation
▪ Trim Constants
Model
ꢂ ꢃ ꢄ
G
H
K
L
ꢀꢁ = �
− ꢉꢊ Ω
− ꢉꢊ Ω
5V Models
12V Models
15V Models
24V Models
5110
2050
5110
5110
13000
2.5
9.5
12.5
21.5
2.5
2.5
2.5
2.5
(ꢅꢆ,ꢁꢇ − ꢄ − ꢈ)
10000
10000
56000
▪Trim Down Equation
(ꢅꢌ,ꢍꢌꢎꢏ − ꢄ) ꢃ ꢂ
ꢀꢋ = �
(ꢅꢌ − ꢅꢌ,ꢍꢌꢎꢏ
)
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using the method shown below.
Trim Up
5V Models
∆V (%)
Vout (V)
Ru (kΩ)
1
2
3
4
5
6
7
8
9
10
5.05
5.1
5.15
5.2
5.25
5.3
5.35
5.4
5.45
5.5
253.450 125.700
83.117
61.825
49.050
40.533
34.450
29.888
26.339
23.500
12V Models
∆V (%)
1
2
3
4
5
6
7
8
9
10
Vout (V)
12.12
203.223
12.24
99.057
12.36
64.334
12.48
46.973
12.6
12.72
29.612
12.84
24.652
12.96
20.932
13.08
18.038
13.2
Ru (kΩ)
36.557
15.723
15V Models
∆V (%)
1
2
3
4
5
6
7
8
9
10
Vout (V)
15.15
161.557
15.3
15.45
50.446
15.6
15.75
28.223
15.9
16.05
18.700
16.2
16.35
13.409
16.5
Ru (kΩ)
78.223
36.557
22.668
15.723
11.557
∆V (%)
Vout (V)
Ru (kΩ)
11
12
13
14
15
16
17
18
19
20
18
16.65
10.042
16.8
8.779
16.95
7.711
17.1
6.795
17.25
6.001
17.4
5.307
17.55
4.694
17.7
4.149
17.85
3.662
3.223
24V Models
∆V (%)
1
2
3
4
5
6
7
8
9
10
Vout (V)
24.24
24.48
24.72
24.96
25.2
25.44
84.222
25.68
70.333
25.92
59.917
26.16
51.815
26.4
Ru (kΩ)
570.333 278.667 181.444 132.833 103.667
45.333
∆V (%)
Vout (V)
Ru (kΩ)
11
12
13
14
15
16
17
18
19
20
26.64
40.030
26.88
35.611
27.12
31.872
27.36
28.667
27.6
27.84
23.458
28.08
21.314
28.32
19.407
28.56
17.702
28.8
25.889
16.167
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
5/20/2019
Page 6 of 8
DCMHIR20 SERIES
Up to 20 Watts
Rev B
DC/DC Converter
Single and Dual Output
Trim Down
5V Models
∆V (%)
1
2
3
4
5
6
7
8
9
10
4.5
Vout (V)
4.95
4.9
4.85
4.8
4.75
4.7
4.65
4.6
4.55
Ru (kΩ)
248.340 120.590
78.007
56.715
43.940
35.423
29.340
24.778
21.229
18.390
12V Models
∆V (%)
1
2
3
4
5
6
7
8
9
10
Vout (V)
11.88
11.76
11.64
11.52
11.4
11.28
11.16
97.985
11.04
83.848
10.92
72.853
10.8
Ru (kΩ)
776.557 380.723 248.779 182.807 143.223 116.834
64.057
15V Models
∆V (%)
1
2
3
4
5
6
7
8
9
10
Vout (V)
14.85
14.7
14.55
14.4
14.25
14.1
13.95
13.8
13.65
77.483
13.5
Ru (kΩ)
818.223 401.557 262.668 193.223 151.557 123.779 103.938
89.057
68.223
24V Models
∆V (%)
1
2
3
4
5
6
7
8
9
10
Vout (V)
23.76
23.52
23.28
23.04
22.8
22.56
22.32
22.08
21.84
21.6
Ru (kΩ)
4947.667 2439.333 1603.222 1185.167 934.333 767.111 647.667 558.083 488.407 432.667
MODEL NUMBER SETUP
DCMHIR
20
-
12
S
05
P
Series Name
Output Power
Input Voltage
Output Quantity
Ouptut Voltage
Remote On/Off & Pin Length
12: 9~18VDC
24: 18~36VDC
244: 9~36VDC
48: 36~75VDC
484: 18~75VDC
S: Single
05: 5VDC
12: 12VDC
15: 15VDC
24: 24VDC
Blank: No Pin
P: Positive Logic
R: Negative Logic
D: Dual
05: ±05VDC
12: ±12VDC
15: ±15VDC
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
5/20/2019
Page 7 of 8
DCMHIR20 SERIES
Up to 20 Watts
Rev B
DC/DC Converter
Single and Dual Output
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
©2019 Wall Industries, Inc. Specifications subject to change without notice. Wall Industries is not responsible for typographical errors. The information contained herein is for
informational purposes only. This information is provided by Wall Industries and we make no representations or warranties of any kind, express or implied, about the completeness,
accuracy, reliability, suitability or availability with respect to the information contained in this document for any purpose. All product and manufacturer names are trademarks or
registered trademarks of their respective companies.
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
5/20/2019
Page 8 of 8
相关型号:
DCMI37S
D Subminiature Connector, 37 Contact(s), Female, 0.109 inch Pitch, Solder Lug Terminal, M3
AMPHENOL
DCMI37S043
D Subminiature Connector, 37 Contact(s), Female, 0.109 inch Pitch, Solder Lug Terminal, M3
AMPHENOL
©2020 ICPDF网 联系我们和版权申明