JFC12S5-4000G [WALL]
Six-Sided Shielding;型号: | JFC12S5-4000G |
厂家: | WALL INDUSTRIES,INC. |
描述: | Six-Sided Shielding |
文件: | 总11页 (文件大小:720K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
Size: 1.0in x 1.0in x 0.39in (25.4mm x 25.4mm x 9.9mm)
OPTIONS
• Negative Logic Remote
On/Off
• Without Trim
• On/Off Pin
• Input Ranges
FEATURES
• Six-Sided Shielding
• Small Size and Low Profile: 1.0” x 1.0” x 0.39 inches
• High Efficiency up to 91%
• Fixed Switching Frequency
• 2:1 Wide Input Voltage Range
• 1600VDC Input to Output Isolation
• Compliant to RoHS II & Reach
• CE Marked
• Industry Standard Pin-Out DM Series Compatible
• Over Voltage, Over Load, and Short Circuit Protection
• UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
• CE Marked
• Positive/Negative Logic Remote On/Off, Without Trim, Without
On/Off Pin options
• Output Voltages
• 9~18VDC, 18~36VDC, and 36~75VDC input ranges available
• Useful in a variety of applications
APPLICATIONS
DESCRIPTION
• Measurement
• Telecom/Datacom
• Industry Control Systems
• Semiconductor Equipment
• Distributed Power Architects
The JFC series of single and dual output DC/DC converters provide up to 15 watts of output power in an industry
standard package and footprint. These units are specifically designed to meet power needs in a low profile
package. All models feature a 2:1 wide input voltage range of 9~18VDC, 18~36VDC, or 36~75VDC. Some
features include positive or negative remote on/off, 1600VDC I/O isolation, and trimmable output voltage. All
models are protected against over current, input under voltage, over voltage, and short circuit conditions.
MODEL SELECTION TABLE
Single Output Models
Input Voltage
Output
Voltage
3.3VDC
5VDC
No Load
Input Current
Maximum
Capacitive Load
Model Number
Output Current Ripple & Noise
Output Power
Up to 15W
Efficiency
Range
JFC12S3.3-4000
JFC12S5-3000
JFC12S12-1300
JFC12S15-1000
JFC12S24-625
JFC24S3.3-4000
JFC24S5-3000
JFC24S12-1300
JFC24S15-1000
JFC24S24-625
JFC48S3.3-4000
JFC48S5-3000
JFC48S12-1300
JFC48S15-1000
JFC48S24-625
4000mA
3000mA
1300mA
1000mA
625mA
75mVp-p
75mVp-p
100mVp-p
100mVp-p
100mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
100mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
100mVp-p
120mA
90mA
30mA
30mA
12mA
50mA
65mA
20mA
20mA
10mA
25mA
35mA
12mA
12mA
10mA
12000µF
6000µF
1000µF
660µF
84%
88%
86%
88%
90%
86%
88%
87%
88%
90%
86%
88%
88%
88%
91%
12VDC
(9~18VDC)
12VDC
15VDC
24VDC
3.3VDC
5VDC
200µF
4000mA
3000mA
1300mA
1000mA
625mA
12000µF
6000µF
1000µF
660µF
24VDC
(18~36VDC)
12VDC
15VDC
24VDC
3.3VDC
5VDC
Up to 15W
Up to 15W
200µF
4000mA
3000mA
1300mA
1000mA
625mA
12000µF
6000µF
1000µF
660µF
48VDC
(36~75VDC)
12VDc
15VDC
24VDC
200µF
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 1 of 11
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
MODEL SELECTION TABLE
Dual Output Models
Maximum
Input Voltage
Range
Output
Voltage
No Load
Model Number
Output Current Ripple & Noise
Output Power
Up to 15W
Capacitive
Efficiency(3)
Input Current(1)
Load(2)
JFC12D5-1500
JFC12D12-625
JFC12D15-500
JFC12D24-315
JFC24D5-1500
JFC24D12-625
JFC24D15-500
JFC24D24-315
JFC48D5-1500
JFC48D12-625
JFC48D15-500
JFC48D24-315
±5VDC
±12VDC
±15VDC
±24VDC
±5VDC
±1500mA
±625mA
±500mA
±315mA
±1500mA
±625mA
±500mA
±315mA
±1500mA
±625mA
±500mA
±315mA
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
30mA
30mA
30mA
17mA
15mA
15mA
25mA
12mA
12mA
15mA
20mA
10ma
±3000µF
±520µF
±330µF
±100µF
±3000µF
±520µF
±330µF
±100µF
±3000µF
±520µF
±330µF
±100µF
85%
87%
88%
90%
85%
88%
88%
90%
85%
89%
88%
91%
12VDC
(9~18VDC)
±12VDC
±15VDC
±24VDC
±5VDC
24VDC
(18~36)
Up to 15W
Up to 15W
±12VDC
±15VDC
±24VDC
48VDC
(36~75VDC)
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
TEST CONDITIONS
Min
Typ
Max
Unit
VDC
VDC
VDC
12Vin(nom)
24Vin(nom)
48Vin(nom)
12Vin(nom)
24Vin(nom)
48Vin(nom)
12Vin(nom)
24Vin(nom)
48Vin(nom)
9
18
36
12
24
48
18
36
75
9
18
36
Operating Input Voltage Range
Start-Up Voltage
8
14.5
30.5
Shutdown Voltage
12Vin(nom)
24Vin(nom)
48Vin(nom)
36
50
100
Input Surge Voltage
100ms, max.
VDc
Input Reflected Ripple Current
Input Filter
Nominal Input and Full Load
30
mAp-p
Pi Type
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
See Table
+1.0
-1.0
-0.2
-0.5
-0.2
-1.0
-10
%
%
Single
Dual
Single
Dual
24Vout
Others
+0.2
+0.5
+0.2
+1.0
+20
Line Regulation
Low Line to High Line at Full Load
No Load to Full Load
Single Output
Load Regulation
Voltage Adjustability(4)
%
%
-10
+10
Output Power
See Table
Output Current
Maximum Capacitive Load
See Table
See Table
Single
With a 1µF M/C X7R and a 10µF T/C
With a 1µF M/C X7R and a 10µF T/C
Ripple & Noise (20MHz bandwidth) With a 6.8µF/50V X7R MLCC
3.3Vout, 5Vout
12Vout, 15Vout
24Vout
75
100
100
mVp-p
Dual
With a 4.7µF/50V X7R MLCC for each output
With a 1µF M/C X7R and a 10µF T/C for each output Others
Transient Response Recovery Time 25% load step change
24Vout
100
100
250
µs
ms
Power Up
Remote On/Off
30
30
Start-Up Time
Constant Resistive Load
Temperature Coefficient
-0.02
+0.02
%/ºC
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 2 of 11
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
REMOTE ON/OFF CONTROL(5)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Open or 3~15VDC
Short or 0~1.2VDC
Short or 0~1.2VDC
Open or 3~15VDC
1.0
Positive Logic (standard)
Negative Logic (option)
Input Current of CTRL Pin
Remote OFF Input Current
PROTECTION
-0.5
mA
mA
2.5
Short Circuit Protection
Over Load Protection
Continuous, Automatic Recovery
150
% of Lout Rated; Hiccup Mode
%
3.3Vout
5Vout
3.7
5.6
5.4
7.0
Over Voltage Protection
12Vout
15Vout
24Vout
13.5
16.8
29.1
19.6
20.5
32.5
VDC
ENVIRONMENTAL SPECIFICATIONS
Without Derating
With Derating
-40
+60
+60
+105
105
Operating Ambient Temperature
ºC
Maximum Case Temperature
Storage Temperature Range
ºC
ºC
-55
5
+125
Without Heat-Sink
With Heat-Sink
18.2
15.8
Thermal Impedance(6)
Natural Convection (20LFM)
MIL-HDBK-217F, Full Load
ºC/W
Thermal Shock
Relative Humidity
Vibration
MIL-STD-810F
95
%RH
MIL-STD-810F
MTBF
1.600 x 106 hrs
GENERAL SPECIFICATIONS
Efficiency
See Table
Switching Frequency
360
1600
1000
1
400
440
kHz
Input to Output
Input (Output) to Case
Isolation Voltage
1 Minute
500VDC
VDC
Isolation Resistance
Isolation Capacitance
PHYSICAL SPECIFICATIONS
Weight
GΩ
pF
1000
0.53oz (15g)
1.0in x 1.0in x 0.39in
(25.4mm x 25.4mm x 9.9mm)
Nickel-Coated Copper
FR4 PCB
Dimensions (L x W x H)
Case Material
Base Material
Potting Material
Epoxy (UL94 V-0)
SAFETY & EMC CHARACTERISTICS
UL60950-1
EN60950-1
Safety Approvals
Pending: JFCxxS24-xxxx, JFCxxD24-xxxx
IEC60950-1
Class A
Class B
EMI(7)
EN55022
ESD
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Air ±8kV and Contact ±6kV
10 V/m
±2kV
±1kV
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Radiated Immunity
Fast Transient(8)
Surge(8)
Conducted Immunity
3 Vr.m.s
100A/m continuous; 1000A/m 1
second
Power Frequency Magnetic Field
EN61000-4-8
Perf. Criteria A
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 3 of 11
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
NOTES
(1) Typical Value at Nominal Input Voltage and No Load.
(2) Test by Minimum Vin and Constant Resistive Load.
(3) Typical Value at Nominal Input Voltage and Full Load.
(4) Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external
resistor between the Trim pin and either +Vout pin or –Vout pin.
(5) The ON/OFF Control pin voltage is referenced to –Vin. (See the “Product Standard Table” below for suffix options)
(6) For Heat Sink option add the suffix “HS” to the part number (Ex: JFC48S5-3000HS)(P/N: 7G-0047C-F). See attached for more details.
(7) The JFC series can meet EN55022 Class A and Class B with external capacitors connected in parallel to the input pins. See attached for more
details.
(8) An external filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5. The filter capacitor suggested is Nippon chemi-
con KY series, 220µF/100V.
Caution: This power module is not internally fused. An input line fuse must always be used.
*Due to advances in technology, specifications subject to change without notice.
DERATING CURVES
JFC48S5-3000 Derating Curve
JFC48S5-3000 Derating Curve With Heat-Sink
EFFICIENCY GRAPHS
JFC48S5-3000 Efficiency vs. Input Voltage
JFC48S5-3000 Efficiency vs. Output Load
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 4 of 11
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
MECHANICAL DRAWINGS
PIN Connection
PIN
1
2
SINGLE
+Vin
-Vin
DUAL
+Vin
-Vin
3
Ctrl
Ctrl
4
5
6
+Vout
Trim
-Vout
+Vout
Common
-Vout
External Output Trimming
Output can be externally trimmed
by using the method shown below
Product Standard Table
Option
Suffix
R
Blank
D
Negative Remote ON/OFF
Positive Remote ON/OFF
Without ON/OFF Pin
Without ON/OFF & TRIM Pin
Negative Remote ON/OFF without
TRIM pin
Positive Remote ON/OFF without
TRIM pin
G
RF
1. All dimensions in inch (mm)
2. Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
3. Pin pitch tolerance ±0.01 (0.25)
4. Pin dimension tolerance ±0.004 (0.1)
F
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 5 of 11
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
HEATSINK OPTIONS
Equip heat-sink for lower temperature and higher reliability of the module. There are two types to choose from.
1” x 1” Heat-Sink
Dimensions in inch (mm)
2” x 1” Heat Sink
Dimensions in inch (mm)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 6 of 11
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
2” x 1.6” Heat-Sink
Dimensions in inch (mm)
2” x 2” Heat Sink
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 7 of 11
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
RECOMMENDED FILTERS
Recommended External Filter for EN55022 Class A
MODEL
C1
C2
C3
C4
10µF/25V
1812 MLCC
6.8µF/50V
1812 MLCC
2.2µF/100V
1812 MLCC
470pF/2kV
1808 MLCC
470pF/2kV
1808 MLCC
470pF/2kV
1808
470pF/2kV
1808 MLCC
470pF/2kV
1808 MLCC
470pF/2kV
1808 MLCC
JFC12xx-xxxx
N/A
6.8µF/50V
1812 MLCC
2.2µF/100V
1812 MLCC
JFC24xx-xxxx
JFC48xx-xxxx
Recommended External Filter for EN55022 Class B
MODEL
C1
C2
C3
C4
C5
L1
10µF/25V
1812 MLCC
6.8µF/50V
1812 MLCC
2.2µF/100V
1812 MLCC
10µF/25V
1812 MLCC
6.8µF/50V
1812 MLCC
2.2µF/100V
1812 MLCC
470pF/2kV
1808 MLCC
470pF/2kV
1808 MLCC
1000pF/2kV
1808 MLCC
470pF/2kV
1808 MLCC
470pF/2kV
1808 MLCC
1000pF/2kV
1808 MLCC
145µH
Common Choke PMT-051
325µH
Common Choke PMT-050
325µH
Common Choke PMT-050
JFC12xx-xxxx
JFC24xx-xxxx
JFC48xx-xxxx
N/A
N/A
2.2µF/100V
1812 MLCC
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 8 of 11
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
OUTPUT VOLTAGE ADJUSTMENT
Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of the module. This is
accomplished by connecting an external resistor between the TRIM pin and either the +OUTPUT or –OUTPUT pins. With an external
resistor between the TRIM and –OUTPUT pin, the output voltage set point increases. With an external resistor between the TRIM and
+OUTPUT pin, the output voltage set point decreases. The external TRIM resistor needs to be at least 1/16W or rated power.
Trim Up Equation
Trim Down Equation
Trim Constants
Module
G
H
K
L
JFCxxS3.3-xxxx
JFCxxS5-xxxx
JFCxxS12-xxxx
JFCxxS15-xxxx
JFCxxS24-xxxx
5110
5110
10000 5110
10000 5110
2050
2050
0.8
2.5
9.5
12.5
2.5
2.5
2.5
2.5
2.5
56000 13000 21.5
Output Voltage Adjustment Configurations
JFCxxS3.3-xxxx TRIM-UP
Trim-Up (%)
Vout (V)
RU (kΩ)
1
2
3
4
5
6
7
8
9
10
3.630
3.333
3.366
3.399
3.432
3.465
75.374
3.498
62.470
3.531
53.253
3.564
46.340
3.597
40.963 36.662
385.071 191.511 126.990 94.730
TRIM-DOWN
Trim-Down (%)
Vout (V)
1
2
3
4
5
6
7
8
9
10
2.970
5.228
3.267
3.234
3.201
3.168
23.810
3.135
17.616
3.102
13.486
3.069
10.537
3.036
8.325
3.003
6.604
RD (kΩ)
116.719 54.779 34.133
JFCxxS5-xxxx TRIM-UP
Trim-Up (%)
1
2
3
4
5
6
7
8
9
10
Vout (V)
RU (kΩ)
5.050
5.100
5.150
5.200
61.825
5.250
49.050
5.300
40.533
5.350
34.450
5.400
29.888
5.450
26.339 23.500
5.500
253.450 125.700 83.117
TRIM-DOWN
Trim-Down (%)
Vout (V)
1
2
3
4
5
6
7
8
9
10
4.500
18.390
4.950
4.900
4.850
4.800
56.715
4.750
43.940
4.700
35.423
4.650
29.340
4.600
24.778
4.550
21.229
RD (kΩ)
248.340 120.590 78.007
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 9 of 11
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
JFCxxS12-xxxx TRIM-UP
Trim-Up (%)
Vout (V)
RU (kΩ)
1
2
3
4
5
6
7
8
9
10
13.200
15.723
12.120
12.240 12.360 12.480 12.600
12.720
29.612
12.840
24.652
12.960
20.932
13.080
18.038
203.223 99.057 64.334 46.973 36.557
TRIM-DOWN
Trim-Down (%)
Vout (V)
1
2
3
4
5
6
7
8
9
10
10.800
64.057
11.880
11.760
11.640
11.520
11.400
11.280
11.160
11.040
83.848
10.920
72.853
RD (kΩ)
776.557 308.723 248.779 182.807 143.223 116.834 97.985
JFCxxS15-xxxx TRIM-UP
Trim-Up (%)
Vout (V)
RU (kΩ)
1
2
3
4
5
6
7
8
9
10
16.500
11.557
15.150 15.300 15.450 15.600 15.750
161.557 78.223 50.446 36.557 28.223
15.900
22.668
16.050
18.700
16.200
15.723
16.350
13.409
TRIM-DOWN
Trim-Down (%)
Vout (V)
1
2
3
4
5
6
7
8
9
10
13.000
68.223
14.850
14.700
14.550
14.400
14.250
14.000
13.750
13.500
13.250
77.483
RD (kΩ)
818.223 401.557 262.668 193.223 193.223 151.557 103.938 89.057
JFCxxS24-xxxx TRIM-UP
Trim-Up (%)
Vout (V)
RU (kΩ)
1
2
3
4
5
6
7
8
9
10
24.240
24.480
24.720
24.960
25.200
25.440
84.222
25.680
70.333
25.920
59.917
26.160 26.400
51.815 45.333
570.333 278.667 181.444 132.833 13.667
Trim-Up (%)
Vout (V)
RU (kΩ)
11
26.640
40.030
12
26.880
35.611
13
27.120
31.872
14
27.360
28.667
15
27.600
25.889
16
27.840
23.458
17
28.080
21.314
18
28.320
19.407
19
20
28.560 28.800
17.702 16.167
TRIM-DOWN
Trim-Down (%)
1
2
3
4
5
6
7
8
9
10
Vout (V)
23.760
23.520
23.280
23.040
22.800
22.560
22.320
22.080
21.840
21.600
RD (kΩ)
4947.667 2439.333 1603.222 1185.167 934.333 767.111 647.667 558.083 488.407 423.667
The power module should be connected to a low impedance input source. Highly inductive source impedance can affect the stability of the
power module.
Install CSIM and LSIM to simulate the impedance of power source. External input capacitors CFILTER serve primarily as energy-storage
elements, minimizing line voltage variations caused by transient IR drops in conductors from backplane to the DC/DC. The capacitor must
be as close as possible to the input terminals of the power module for lower impedance. For the input reflected-ripple current measurement
configuration is shown as below:
Input reflected-ripple current measurement setup
JFCxxSxx-xxxx
Component
LSIM
CSIM~CFILTER
Value
12µH
10µF
Voltage
----
100V
Reference
Inductor
Nippon chemi-con KY-series
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 10 of 11
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
MODEL NUMBER SETUP
JFC
24
S
12
-
1300
D
Series Name Input Voltage Output Quantity
Output Voltage
Ouptut Current
Suffix
12: 9~18VDC
24: 18~36VDC
48: 36~75VDC
S: Single
D: Dual
3.3: 3.3VDC
4000: 4000mA
3000: 3000mA
1500: ±1500mA
1300: 1300mA
1000: 1000mA
625: 625mA/±625mA
500: ±500mA
Blank: Pos. Remote ON/OFF
5: 5VDC/±5VDC
R: Neg. Remote ON/OFF
12: 12VDC/±12VDC
15: 15VDC/±15VDC
24: 24VDC/±24VDC
D: Without ON/OFF Pin
G: Without ON/OFF & TRIM pin
RF: Neg. Remote ON/OFF without TRIM pin
F: Pos. Remote ON/OFF without TRIM pin
315: ±315mA
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 11 of 11
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号:
©2020 ICPDF网 联系我们和版权申明