JFCW20 [WALL]
20 Watts DC/DC Power Converter Single and Dual Output;型号: | JFCW20 |
厂家: | WALL INDUSTRIES,INC. |
描述: | 20 Watts DC/DC Power Converter Single and Dual Output |
文件: | 总9页 (文件大小:609K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
JFCW20 SERIES
20 Watts
DC/DC Power Converter
Single and Dual Output
Rev E
FEATURES
• 20 Watts Maximum Output Power
• Single and Dual Outputs
• Industry Standard Pin-Out
• Small Size and Low Profile: 1.0” x 1.0”
x 0.39”
• 4:1 Ultra Wide Input Voltage Range
• High Efficiency up to 91%
• 1600VDC I/O Isolation
• Remote ON/OFF Control
• Over Voltage, Over Load, and Short
Circuit Protected
• Six-Sided Continuous Shield
• EMI Meets EN55022 Class A Without
External Filter
• CE Marked
• UL60950-1, EN60950-1, and IEC60950-1
Safety Approvals
• Ultra Low Quiescent Current
• Fixed Switching Frequency
• Compliant to RoHS II & REACH
Size: 1.0in x 1.0in x 0.39in (25.4mm x 25.4mm x 9.9mm)
OPTIONS
• Remote ON/OFF
• Heatsink
• Operating
Temperature
APPLICATIONS
DESCRIPTION
• Wireless Networks
• Telecom / Datacom
• Industry Control Systems
• Distributed Power Architectures
• Semiconductor Equipment
• Automation
The JFCW20 series of DC/DC power converters provides 20 watts of output power in
a 1.0 x 1.0 x 0.39 inch industry standard package and footprint. This series has
single and dual output models with 4:1 ultra wide input voltage ranges of 9-36VDC
and 18-75VDC. Some features include high efficiency, ultra low quiescent current,
1600VDC I/O isolation, remote ON/OFF, and trimmable output voltage. This series is
also protected against over voltage, over current, input under voltage, and short
circuit conditions. All models are RoHS compliant and have UL60950-1, EN60950-1,
and IEC60950-1 safety approvals.
• Measurement
• IPC
MODEL SELECTION TABLE
Single Output Models
Output Current
Min Load Max Load
Input Voltage
Range
Output
Voltage
No Load
Input Current
Maximum
Output
Power
Model Number
Efficiency
Ripple & Noise
75mVp-p
Capacitive Load(1)
JFCW24S3.3-20
JFCW24S5-20
JFCW24S12-20
JFCW24S15-20
JFCW24S24-20
JFCW48S3.3-20
JFCW48S5-20
JFCW48S12-20
3.3 VDC
5 VDC
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
4500mA
4000mA
1670mA
1330mA
833mA
10mA
10mA
6mA
89%
89%
89%
89%
91%
90%
90%
89%
90%
91%
7000µF
5000µF
850µF
700µF
220µF
7000µF
5000µF
850µF
700µF
220µF
24 VDC
12 VDC
15 VDC
24VDC
3.3 VDC
5 VDC
20W
20W
(9 – 36 VDC)
6mA
10mA
10mA
10mA
4mA
4500mA
4000mA
1670mA
1330mA
833mA
48 VDC
12 VDC
15 VDC
24VDC
75mVp-p
(18 – 75 VDC)
JFCW48S15-20
JFCW48S24-20
4mA
8mA
MODEL SELECTION TABLE
Dual Output Models
Output Current
Input Voltage
Range
Output
Voltage
No Load
Input Current
Maximum
Output
Power
Model Number
Efficiency
Ripple & Noise
100mVp-p
Capacitive Load(1)
Min Load Max Load
JFCW24D12-20
JFCW24D15-20
JFCW24D24-20
JFCW48D12-20
JFCW48D15-20
JFCW48D24-20
±12 VDC
±15 VDC
±24 VDC
±12 VDC
±15 VDC
±24 VDC
0mA
0mA
0mA
0mA
0mA
0mA
±833mA
±667mA
±417mA
±833mA
±667mA
±417mA
6mA
6mA
89%
90%
91%
89%
90%
91%
±500µF
±350µF
±100µF
±500µF
±350µF
±100µF
24 VDC
20W
20W
(9 – 36 VDC)
12mA
4mA
48 VDC
4mA
100mVp-p
(18 – 75 VDC)
10mA
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
4/10/2018
Page 1 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW20 SERIES
20 Watts
DC/DC Power Converter
Single and Dual Output
Rev E
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
24VDC Nominal Input Models
9
18
24
48
36
75
50
100
9
18
Input Voltage Range
Input Surge Voltage (1 sec. max.)
Start-Up Voltage
VDC
VDC
VDC
48VDC Nominal Input Models
24VDC Nominal Input Models
48VDC Nominal Input Models
24VDC Nominal Input Models
48VDC Nominal Input Models
24VDC Nominal Input Models
48VDC Nominal Input Models
Nominal Vin and Full Load
7.5
15.5
8
16
30
8.8
17.5
Shutdown Voltage
VDC
Input Reflected Ripple Current
Input Filter
mAp-p
Pi Type
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Voltage Accuracy
-1.0
-0.2
-0.5
-0.2
-1.0
-0.1
-0.8
-10
+1.0
+0.2
+0.5
+0.2
+1.0
+0.1
+0.8
+20
%
%
Single
Dual
Single
Dual
Single
Dual
24Vout
Others
Line Regulation
Low Line to High Line at Full Load
No Load to Full Load
Load Regulation
Voltage Adjustability(2)
%
%
10% Load to 90% Load
Single Outputs
-10
+10
Output Power
Output Current
Maximum Capacitive Load
See Table
See Table
See Table
With a 1µF M/C X7R and a 10µF T/C
With 2pcs of 6.8µF/50V X7R MLCC
With a 1µF M/C X7R and a 10µF T/C for
each output
3.3V, 5V, 12V, and 24V
24V
75
75
Ripple & Noise (20MHz bandwidth)
mVp-p
±12V and ±15V
100
With a 4.7µF/50V X7R MLCC for each output ±24V
Transient Response Recovery Time 25% Load Step Change
100
250
µS
Constant Resistive Load
Power Up
Remote ON/OFF
30
30
Start-Up Time
mS
Temperature Coefficient
-0.02
-5.0
+0.02
+5.0
%/ºC
%
Cross Regulation
Asymmetrical load 25%/100% FL, Dual Models
REMOTE ON/OFF CONTROL(3)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Open or 3~15VDC
Short or 0~1.2VDC
Short or 0~1.2VDC
Open or 3~15VDC
1.0
Positive Logic (Standard)
Negative Logic (Optional)
Input Current of CTRL Pin
Remote OFF Input Current
PROTECTION
-0.5
mA
mA
2.0
Short Circuit Protection
Over Load Protection
Continuous, Automatic Recovery
150
%Iout rated; Hiccup Mode
3.3V Output Models
5V Output Models
%
3.7
5.4
7.0
5.6
Over Voltage Protection
12V Output Models
15V Output Models
24V Output Models
13.5
16.8
29.1
19.6
20.5
32.5
VDC
ENVIRONMENTAL SPECIFICATIONS
Standard
M3 Version
With derating
With derating
-40
+55
+101
+101
105
+125
95
Operating Ambient Temperature
ºC
Maximum Case Temperature
Storage Temperature
Relative Humidity
ºC
ºC
%RH
-55
5
Without Heat-Sink
With Heat-Sink
17.6
14.8
Thermal Impedance(4)
ºC/W
Thermal Shock
Vibration
MTBF
MIL-STD-810F
MIL-STD-810F
1,469,000
MIL-HDBK-217F, Full Load
Hours
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
4/10/2018
Page 2 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW20 SERIES
20 Watts
DC/DC Power Converter
Single and Dual Output
Rev E
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
GENERAL SPECIFICATIONS
Efficiency
TEST CONDITIONS
Min
Typ
Max
Unit
See Table
3.3V Output Models, 5V Output Models
Others
248
297
1600
1000
1
275
330
303
363
Switching Frequency
Isolation Voltage
kHz
1 minute
Input to Output
VDC
Input (Output) to Case
Isolation Resistance
Isolation Capacitance
PHYSICAL SPECIFICATIONS
Weight
500VDC
GΩ
pF
1500
0.53oz (15g)
1in x 1in x 0.39in
(25.4mm x 25.4mm x 9.9mm)
Nickel-Coated Copper
FR4 PCB
Dimensions (L x W x H)
Case Material
Base Material
Potting Material
Shielding
Silicone (UL94 V-0)
Six-Sided Continuous Shield
SAFETY CHARACTERISTICS
UL: E193009
CB: UL (Demko)
Class A
Safety Approvals
EMI(5)
UL60950-1, EN60950-1, IEC60950-1
Without external components
With external components
EN55022
Class B
ESD
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
Air ±8kV and Contact ±6kV
10 V/m
±2kV
±2kV
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Radiated Immunity
Fast Transient(6)
Surge(6)
Conducted Immunity
Power Frequency Magnetic Field
10Vr.m.s
100A/m Continuous; 1000A/m 1 sec.
NOTES
1. Tested by minimum input and constant resistive load.
2. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external
resistor between the Trim pin and either +Vout pin or –Vout pn.
3. The ON/OFF control pin is referenced to –Vin. To order Negative Logic Remote ON/OFF add the suffix “R” to the model number.
4. Heatsink is optional and P/N: 7G-0047C-F. See “Model Number Setup” on page 4 for more information.
5. EN55022
1. To meet Class A the module needs no external components.
2. To meet Class B please refer to the filter suggestion on page 4.
6. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The suggested filter capacitor is Nippon chemi-
con KY series, 220µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
*Due to advances in technology, specifications subject to change without notice.
DERATING CURVES
JFCW48S5-20 Derating Curve
JFCW48S5-20 Derating Curve with Heatsink
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
4/10/2018
Page 3 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW20 SERIES
20 Watts
DC/DC Power Converter
Single and Dual Output
Rev E
EFFICIENCY GRAPHS
Efficiency vs. Input Voltage
Efficiency vs. Output Load
MECHANICAL DRAWINGS
PIN CONNECTION
PIN
1
SINGLE
+Vin
DUAL
+Vin
2
-Vin
-Vin
3
Ctrl
Ctrl
4
5
6
+Vout
Trim
-Vout
+Vout
Common
-Vout
Notes:
All dimensions in inch (mm)
Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
Pin pitch tolerance ±0.01 (0.25)
Pin dimension tolerance ±0.004(0.1)
Heatsink with Clamps (-HC)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
4/10/2018
Page 4 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW20 SERIES
20 Watts
DC/DC Power Converter
Single and Dual Output
Rev E
RECOMMENDED PAD LAYOUT
Standard
Heat Sink with Clamps (-HC)
All dimensions in inch [mm]
Pad size (lead free recommended)
Through Hole 1.2.3.4.5.6: Φ0.051 [1.30]
Top View Pad 1.2.3.4.5.6: Φ0.065 [1.63]
Bottom View Pad 1.2.3.4.5.6: Φ0.102 [2.60]
RECOMMENDED FILTERS
Recommended Filter for EN55022 Class B Compliance
Recommended EN55022 Class B Filter Circuit Layout
The components used in the figure above are as follows:
C1, C2
C2
C3
C4 & C5
L1
325µH
Common Choke
PMT-050
4.7µF/50V
1812 MLCC
470pF/2KV
1808 MLCC
JFCW-24xxx-20
JFCW-48xxx-20
N/A
N/A
325µH
Common Choke
PMT-050
2.2µF/100V 2.2µF/100V 2.2µF/100V 1000pF/2KV
1812 MLCC 1812 MLCC 1812 MLCC 1808 MLCC
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
4/10/2018
Page 5 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW20 SERIES
20 Watts
DC/DC Power Converter
Single and Dual Output
Rev E
FUSE CONSIDERATION
This power module is not internally fused. An input line fuse must always be used.
This encapsulated power module can be used in a variety of applications, ranging from simple stand-alone operation to an integrated
part of sophisticated power architecture.
To maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input
line fuse.
The suggested input line fuse below:
Model
Fuse Rating (A)
Fuse Type
Slow-Blow
Slow-Blow
JFCW24Sx-20 & JFCW24Sx-20
JFCW48Sx-20 & JFCW48Sx-20
4A
2A
The table based on the information provided in this data sheet on inrush energy and maximum DC input current at low Vin.
THERMAL CONSIDERATION
This power module operates in a variety of thermal environments, however, sufficient cooling should be provided to help ensure reliable
operation of the unit. Heat is removed by conduction, convection, and radiation to the surrounding environment.
Proper cooling can be verified by measuring the point in the figure below. The temperature at this location should not exceed 105ºC.
When operating, adequate cooling must be provided to maintain the test point temperature at or below 105ºC.
Although the maximum point temperature of the power modules is 105ºC, you can limit this temperature to a lower value for extremely
high reliability.
■Thermal test condition with vertical direction by natural convection (20LFM).
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
4/10/2018
Fax 603-778-9797
Page 6 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW20 SERIES
20 Watts
DC/DC Power Converter
Single and Dual Output
Rev E
OUTPUT VOLTAGE ADJUSTMENT
Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of the module. This is
accomplished by connecting an external resistor between the Trim pin and either the +Output or -Output pins.
With an external resistor between the Trim and -Output pin, the output voltage set point increases.
With an external resistor between the Trim and +Output pin, the output voltage set point decreases.
The external Trim resistor needs to be at least 1/16W of rated power.
Trim Up Equation
Module
G
H
K
0.8
2.5
9.5
12.5
21.5
L
GxL
JFCWxxS3.3-20
JFCWxxS5-20
JFCWxxS12-20
JFCWxxS15-20
JFCWxxS24-20
5110
5110
10000
10000
56000
2050
2050
5110
5110
13000
2.5
2.5
2.5
2.5
2.5
RU=
[
-H Ω
]
(VO,up – L – K)
Trim Down Equation
(VO,down – L) x G
RD=
[
-H]Ω
(VO – Vo, down
)
External Output Trimming
Output can be externally trimmed by using the method shown below.
Trim-Up
3.3VDC Models
ΔV (%)
Vout (V)
1
2
3
4
5
6
7
8
9
10
3.630
3.333
3.366
3.399
3.432
3.465
3.498
3.531
3.564
3.597
RU (kΩ) 385.071 191.511 126.990 94.730 75.374
62.470 53.253 46.340 40.963 36.662
5VDC Models
ΔV (%)
1
2
3
4
5
6
7
8
9
10
Vout (V)
5.050
5.100
5.150
5.200
5.250
5.300
5.350
5.400
5.450
5.500
RU (kΩ) 253.450 125.700 83.117 61.825 49.050 40.533 34.450 29.888 26.339 23.500
12VDC Models
ΔV (%)
1
2
3
4
5
6
7
8
9
10
Vout (V) 12.120
RU (kΩ) 203.223 99.057
12.240
12.360 12.480 12.600 12.720 12.840 12.960 13.080 13.200
64.334 46.973 36.557 29.612 24.625 20.932 18.038 15.723
15VDC Models
ΔV (%)
1
2
3
4
5
6
7
8
9
10
Vout (V) 15.150
RU (kΩ) 161.557 78.223
15.300
15.450 15.600 15.750 15.900 16.050 16.200 16.350 16.500
54.446 36.557 28.223 22.668 18.700 15.723 13.409 11.557
24VDC Models
ΔV (%)
1
2
3
4
5
6
7
8
9
10
Vout (V) 24.240
24.480
24.720
24.960
25.200 25.440 25.680 25.920 26.160 26.400
RU (kΩ) 570.333 278.667 181.444 132.833 103.667 84.222 70.333 59.917 51.815 45.333
ΔV (%)
11
12
13
14
15
16
17
18
19
20
Vout (V) 26.640
RU (kΩ) 40.030
26.880
35.611
27.120
31.872
27.360
28.667
27.600 27.840 28.080 28.320 28.560 28.800
25.889 23.458 21.314 19.407 17.702 16.167
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
4/10/2018
Page 7 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW20 SERIES
20 Watts
DC/DC Power Converter
Single and Dual Output
Rev E
Trim-Down
3.3VDC Models
ΔV (%)
1
2
3
4
3.168
23.810
5
6
7
8
9
10
2.970
5.228
Vout (V)
RU (kΩ) 116.719 54.779
3.267
3.234
3.201
34.133
3.135
17.616
3.102
13.486
3.069
10.537
3.036
8.325
3.003
6.604
5VDC Models
ΔV (%)
Vout (V)
1
2
3
4
5
6
7
8
9
10
4.500
18.390
4.950
4.900
4.850
4.800
56.715
4.750
43.940
4.700
35.423
4.650
29.340
4.600
24.778
4.550
21.229
RU (kΩ) 248.340 120.590 78.007
12VDC Models
ΔV (%)
Vout (V)
1
2
3
4
5
6
7
8
9
10
10.800
64.057
11.880
11.760
11.640
11.520
11.400
11.280
11.160
11.040
83.848
10.920
72.853
RU (kΩ) 776.557 380.723 248.779 182.807 143.223 116.834 97.985
15VDC Models
ΔV (%)
Vout (V)
1
2
3
4
5
6
7
8
9
10
13.500
68.223
14.850
14.700
14.550
14.400
14.250
14.100
13.950
13.800
13.650
77.483
RU (kΩ) 818.223 401.557 262.668 193.223 151.557 123.779 103.938 89.057
24VDC Models
ΔV (%)
1
2
3
4
5
6
7
8
9
10
23.760
23.520
23.280
23.040
22.800
22.560
22.320
22.080
21.840
21.600
Vout (V)
4947.667 2439.333 1603.222 1185.167 934.333
767.111
647.667 558.083 488.407 432.667
RU (kΩ)
MODEL NUMBER SETUP
JFCW
48
S
5
-
20
R
Series Name
Input Power
# of Outputs
Output Voltage
Ouptut Power
Remote On/Off Options
24: 9~36VDC
48: 18~75VDC
S: Single
3.3: 3.3VDC
5: 5VDC
20: 20W
None: Positive ON/OFF (standard)
R: Negative Remote ON/OFF
12: 12VDC
15: 15VDC
24: 24VDC
D: Without ON/OFF
G: Without ON/OFF & Trim Pin
F: Positive Remote ON/OFF without Trim Pin
RF: Negative Remote ON/OFF without Trim Pin
D: Dual
12: ±12VDC
15: ±15VDC
24: ±24VDC
HS
M3
Heatsink Option
Operating Temperature Option
None: None
HC: Heat-sink w. Clamp
Blank: Standard -40~101ºC With Derating
M3: M3 Version -55~101ºC With Derating
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
4/10/2018
Page 8 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW20 SERIES
20 Watts
DC/DC Power Converter
Single and Dual Output
Rev E
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
4/10/2018
Page 9 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号:
©2020 ICPDF网 联系我们和版权申明