KR12D12-230S [WALL]

Analog Circuit,;
KR12D12-230S
型号: KR12D12-230S
厂家: WALL INDUSTRIES,INC.    WALL INDUSTRIES,INC.
描述:

Analog Circuit,

文件: 总3页 (文件大小:104K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
KR SERIES  
TO 6 WATTS  
UP TO 6 WATTS - KR SERIES  
2:1 Input, Regulated and Isolated  
FEATURES  
Output Power of up to 6 Watts  
Wide Input Voltage Range (2:1)  
Industry Standard Pin-Out  
Low ESR Input Capacitors for Reduced Reflected Ripple  
Current  
Single and Dual Outputs  
No Derating to +71°C Ambient  
THE KR SERIES FROM WALL INDUSTRIES  
The KR Series of DC/DC converters combines the attrac-  
tive features of wide input voltage range, compact case  
size, regulated and isolated, single or dual outputs. Triple  
output protection of overload, overvoltage, and current limit-  
ing makes the KR Series the ideal choice for a variety of  
commercial PCB mount applications. Ultra-wide input volt-  
age range available on some models.  
SPECIFICATIONS: KR SERIES  
All specifications apply @ +25 C ambient unless otherwise noted.  
GENERAL SPECIFICATIONS  
Efficiency...........................................................8±ꢀ typical  
INPUT SPECIFICATIONS  
Input Voltage Range9-18, 18-36, 36-75VDC (see note 6)  
Isolation Voltage (input to output).................16±±VDC min.  
9
Input Filter..................................................Low ESR Cap.  
Isolation Resistance (input to output).................1± Ohms  
Switching Frequency...................................3±±kHz typical  
OUTPUT SPECIFICATIONS  
Output Current....................................................see table  
Voltage Accuracy (S/D output with bal load).....±2ꢀ maꢁ.  
Line Regulation .........................................................±1ꢀ  
ENVIRONMENTAL SPECIFICATIONS  
Operating Temperature....................-25 to +71°C Ambient  
Storage Temperature..................................-55° to +1±±°C  
Humidity (non-condensing).....................2±ꢀ to 95ꢀ R.H.  
Load Regulation (S/D output with bal load)  
Single.......................................................±±.2ꢀ maꢁ.  
Dual.............................................................±1ꢀ maꢁ.  
PHYSICAL SPECIFICATIONS  
Weight......................................................................1.± oz.  
Case Material............................Nickel-coated copper with  
...................................................non-conductive baseplate  
Shielding...............................................Siꢁ-sided shielding  
Dual Output with unbalanced load  
25-1±±ꢀ load..............................................±2ꢀ maꢁ.  
Short circuit Protection....................................Continuous  
Ripple/Noise (2±MHz BW).....................5±mV p-p (nom.)  
Current Limiting........................................................12±ꢀ  
Transient Response (5±ꢀ load step)................2±± u sec  
Due to advances in technology, specifications subject to  
change without notice.  
1
603 778 2300  
WWW.WALLINDUSTRIES.COM  
KR SERIES  
TO 6 WATTS  
Input  
Voltage  
(VDC)  
Output  
Voltage  
(VDC)  
Output  
Current  
(mA)  
Model  
Number  
9-18  
18-36  
36-75  
3.3  
5
1±±± KR12S33-1±±±  
1±±± KR12S5-1±±±S  
9
62±  
KR12S9-62±S  
PIN CONNECTIONS  
12  
47± KR12S12-47±S  
4±± KR12S15-4±±S  
Single  
Dual  
15  
±5  
5±±  
KR12D5-5±±S  
1
2
3
4
5
+Vin  
-Vin  
+Vin  
-Vin  
±12  
±15  
23± KR12D12-23±S  
19± KR12D15-19±S  
+Vout  
No Pin  
-Vout  
+Vout  
Common  
-Vout  
3.3  
5
1±±± KR24S33-1±±±  
1±±± KR24S5-1±±±S  
9
12  
15  
±5  
±12  
±15  
3.3  
5
62±  
KR24S9-62±S  
47± KR24S12-47±S  
4±± KR24S15-4±±S  
5±±  
KR24D5-5±±S  
23± KR24D12-23±S  
19± KR24D15-19±S  
1±±± KR48S33-1±±±  
1±±± KR48S5-1±±±S  
NOTES:  
9
62±  
KR48S9-62±S  
1. All case and pin-to-case dimensions refer-  
ence only unless otherwise noted.  
12  
15  
±5  
±12  
±15  
47± KR48S12-47±S  
4±± KR48S15-4±±S  
5±±  
KR48D5-5±±S  
2. PC pins--- ±.±4” diameter ꢁ ±.2±” long  
(min.); typical five places.  
23± KR48D12-23±S  
19± KR48D15-19±S  
3. Pin to pin tolerance: ±±.±1”. Pin diameter  
tolerance ±±.±±5”  
4. All DC/DC converters should be eꢁternal-  
ly fused for protection.  
5. 4:1 Input voltage range available on all  
models. This option is denoted by changing  
the prefiꢁ from “KR” to “KRW”.  
WWW.WALLINDUSTRIES.COM  
603 778 2300  
2
KR SERIES  
TO 6 WATTS  
3
603 778 2300  
WWW.WALLINDUSTRIES.COM  

相关型号:

KR12D12-250S

Analog Circuit,
WALL

KR12D15-190

6 Watt DC/DC Converter Single and Dual Outputs 2:1 and 4:1 Wide Input Voltage Range
WALL

KR12D15-190IP

Analog Circuit,
WALL

KR12D15-190IR

Analog Circuit,
WALL

KR12D15-190S

Analog Circuit,
WALL

KR12D15-200S

Analog Circuit,
WALL

KR12D5-500

6 Watt DC/DC Converter Single and Dual Outputs 2:1 and 4:1 Wide Input Voltage Range
WALL

KR12D5-500S

Analog Circuit,
WALL

KR12D5-600

Analog Circuit,
WALL

KR12D5-600S

Analog Circuit,
WALL

KR12S12-470

6 Watt DC/DC Converter Single and Dual Outputs 2:1 and 4:1 Wide Input Voltage Range
WALL

KR12S12-470S

Analog Circuit,
WALL