KR12S5-1000S [WALL]
Analog Circuit,;型号: | KR12S5-1000S |
厂家: | WALL INDUSTRIES,INC. |
描述: | Analog Circuit, |
文件: | 总3页 (文件大小:131K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
KR/KRW SERIES
TO 6 WATTS
UP TO 6 WATTS - KR SERIES
Regulated and Isolated
FEATURES
• Output Power of up to 6 Watts
• Wide Input Voltage Range (2:1 and 4:1)
• Industry Standard Pin-Out
• Low ESR Input Capacitors for Reduced Reflected Ripple
Current
• Single and Dual Outputs
• No Derating to +71°C Ambient
THE KR SERIES FROM WALL INDUSTRIES
The KR Series of DC/DC converters combines the attrac-
tive features of wide input voltage range, compact case
size, regulated and isolated, single or dual outputs. Triple
output protection of overload, overvoltage, and current limit-
ing makes the KR Series the ideal choice for a variety of
commercial PCB mount applications. Ultra-wide input volt-
age range available on some models.
SPECIFICATIONS: KR SERIES
All specifications apply @ +25 C ambient unless otherwise noted.
GENERAL SPECIFICATIONS
INPUT SPECIFICATIONS
Efficiency...........................................................80% typical
Input Voltage Range ..... 9-18, 18-36, 36-75, 18-75VDC
.......................................................................(see note 5)
Isolation Voltage (input to output).................1600VDC min.
9
Isolation Resistance (input to output).................10 Ohms
Input Filter..................................................Low ESR Cap.
Switching Frequency...................................300kHz typical
OUTPUT SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Output Current....................................................see table
Voltage Accuracy (S/D output with bal load).....±2% max.
Line Regulation .........................................................±1%
Operating Temperature....................-25 to +71°C Ambient
Storage Temperature..................................-55° to +100°C
Humidity (non-condensing).....................20% to 95% R.H.
Load Regulation (S/D output with bal load)
PHYSICAL SPECIFICATIONS
Single.......................................................±0.2% max.
Dual.............................................................±1% max.
Weight......................................................................1.0 oz.
Case Material............................Nickel-coated copper with
...................................................non-conductive baseplate
Shielding...............................................Six-sided shielding
Dual Output with unbalanced load
25-100% load..............................................±2% max.
Short circuit Protection....................................Continuous
Ripple/Noise (20MHz BW).....................50mV p-p (nom.)
Current Limiting........................................................120%
Transient Response (50% load step)................200 u sec
Due to advances in technology, specifications subject to
change without notice.
11/09/02
1
603 778 2300
WWW.WALLINDUSTRIES.COM
KR/KRW SERIES
TO 6 WATTS
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(mA)
Model
Number
9-18
18-36
36-75
3.3
5
1000 KR12S33-1000
PIN CONNECTIONS
1000
620
470
400
500
230
190
KR12S5-1000
KR12S9-620
KR12S12-470
KR12S15-400
KR12D5-500
KR12D12-230
KR12D15-190
Single
+Vin
Dual
9
12
1
2
3
4
5
+Vin
-Vin
15
-Vin
+Vout
No Pin
-Vout
±5
+Vout
Common
-Vout
±12
±15
3.3
5
1000 KR24S33-1000
1000 KR24S5-1000
9
12
15
±5
±12
±15
3.3
5
620
470
400
500
230
190
KR24S9-620
KR24S12-470
KR24S15-400
KR24D5-500
KR24D12-230
KR24D15-190
1000 KR48S33-1000
1000 KR48S5-1000
NOTES:
1. All case and pin-to-case dimensions refer-
ence only unless otherwise noted.
9
620
470
400
500
230
190
KR48S9-620
KR48S12-470
KR48S15-400
KR48D5-500
KR48D12-230
KR48D15-190
12
15
±5
±12
±15
3.3
5
2. PC pins--- 0.04” diameter x 0.20” long
(min.); typical five places.
3. Pin to pin tolerance: ±0.01”. Pin diameter
tolerance ±0.005”
18-75
1000 KRW48S33-1000
1000 KRW48S5-1000
4. All DC/DC converters should be external-
ly fused for protection.
9
620
KRW48S9-620
12
15
±5
±12
±15
470 KRW48S12-470
400 KRW48S15-400
500 KRW48D5-500
230 KRW48D12-230
190 KRW48D15-190
5. 4:1 Input voltage range available on all
models. This option is denoted by changing
the prefix from “KR” to “KRW”.
6. Add “S” suffix for six sided shielding.
11/09/02
WWW.WALLINDUSTRIES.COM
603 778 2300
2
KR/KRW SERIES
TO 6 WATTS
11/09/02
3
603 778 2300
WWW.WALLINDUSTRIES.COM
相关型号:
©2020 ICPDF网 联系我们和版权申明