LANEW4809R [WALL]
2 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range; 2瓦DC / DC转换器单路和双路输出2 ： 1宽输入电压范围
| 型号： | LANEW4809R |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | 2 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range |
| 文件： | 总4页 (文件大小：189K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LANEW Series
Single and Dual Outputs
2:1 Wide Input Voltage Range
FEATURES
● Low Ripple & Noise
● 2 Watts Output Power
● Single and Dual Output
● External ON/OFF Control
● 2:1 Wide Input Voltage Range
● UL94-V0 Case Potting Materials
● Continuous Short Circuit Protection
● Input to Output Isolation up to 1KVDC
● SIP Package: 0.86 x 0.36 x 0.44 Inches
● No External Input and Output Capacitor Needed
SPECIFICATIONS: LANEW Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
5V nominal input
12V nominal input
24V nominal input
48V nominal input
4.5 – 9 VDC
9 – 18 VDC
18 – 36 VDC
36 – 75 VDC
See Table
Input Voltage Range
Input Current
Input Filter
Capacitor Type
5V/ms, max
(Complies)
Input Voltage Variation
dv/dt
5V nominal input
15 VDC
12V nominal input
36 VDC
Input Surge Voltage (100ms max)
24V nominal input
50 VDC
48V nominal input
100 VDC
5V nominal input (100µF)
12V nominal input (100µF)
400mAp-p
Input Reflected Ripple Current
150mAp-p
(There is an external capacitor at input (See Note 2))
24V nominal input (10µF)
48V nominal input (10µF)
Power Up
380mVp-p
170mVp-p
Start Up Time
1ms typ
(Nominal Vin and constant resistive Load)
Remote ON/OFF
DC-DC ON
1ms typ
Open or high impedance
Control pin applied current
DC-DC OFF
4 ~ 8mA max (via 1KΩ)
Remote OFF Input Current (nominal input)
1mA max
Application Circuit
Remote ON/OFF
OUTPUT SPECIFICATIONS
Output Voltage
See Table
±1%
Voltage Accuracy (Full load and nominal Vin)
Line Regulation (Low line to high line at full load)
±0.5%
Single Output
Dual Output
Asymmetrical load 25% / 100% FL
±0.75%
±1%
Load Regulation (25% to 100% full load)
Cross Regulation (Dual)
Minimum Load (See Note 1)
±5%
10% of full load
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
LANEW Series
Single and Dual Outputs
2:1 Wide Input Voltage Range
SPECIFICATIONS (CONTINUED)
OUTPUT SPECIFICATIONS (CONTINUED)
Output Power
2 Watts max.
See Table
Output Current
Ripple & Noise (20MHz bandwidth)
Transient Response Recovery Time
Temperature Coefficient
PROTECTION
Short Circuit Protection
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Isolation Voltage (input to output)
Insulation Resistance
Isolation Capacitance
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Relative Humidity
50mVp-p
25% load step change
500µs typ.
±0.1% / °C max.
Continuous, automatic recovery
See Table
100KHz, min.
1000VDC, min.
10GΩ min.
Full load to minimum load
300pF
-40°C to +85°C
-55°C to +105°C
5% to 95% RH
MIL-STD-810D
Thermal Shock
Vibration
MTBF (see Note 3)
10-55Hz, 10G, 30 minutes along X, Y, and Z axis
5,017,000 hours
PHYSICAL SPECIFICATIONS
Weight
4.8 grams (0.17oz)
0.86 x 0.36 x 0.44 inches (21.8 x 9.2 x 11.1 mm)
Non-conductive black plastic
None
Dimensions
Case Material
Base Material
Potting Material
Silicon (UL94-V0)
SAFETY & EMC
Safety Approvals and Standards
Meets IEC60950-1, UL60950-1, EN60950-1
5V nominal input
100µF & 10µF
12V nominal input 100µF & 10µF
24V nominal input 10µF & 120µF
48V nominal input 10µF & 120µF
Meet EN55022 classes B recommend
circuit with an external L-C filter at input
EMC External Circuit
EMC Characteristics (See Note 4)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
LANEW Series
Single and Dual Outputs
2:1 Wide Input Voltage Range
OUTPUT VOLTAGE / CURRENT RATING CHART
Output
Output Current
Min. load Full load
Capacitor (7)
Model Number
Input Range
Input Current (5) Efficiency (6)
Voltage
3.3 VDC
5 VDC
Load max
2200uF
1000uF
470uF
LANEW533R
50mA
40mA
22mA
17mA
13mA
±20mA
±8mA
±7mA
50mA
40mA
22mA
17mA
13mA
±20mA
±8mA
±7mA
50mA
40mA
22mA
17mA
13mA
±20mA
±8mA
±7mA
50mA
40mA
22mA
17mA
13mA
±20mA
±8mA
±7mA
500mA
400mA
222mA
167mA
134mA
±200mA
±83mA
±67mA
500mA
400mA
222mA
167mA
134mA
±200mA
±83mA
±67mA
500mA
400mA
222mA
167mA
134mA
±200mA
±83mA
±67mA
500mA
400mA
222mA
167mA
134mA
±200mA
±83mA
±67mA
540mA
615mA
596mA
588mA
582mA
645mA
595mA
598mA
202mA
234mA
222mA
219mA
220mA
242mA
224mA
226mA
102mA
115mA
109mA
109mA
108mA
117mA
112mA
110mA
52mA
65%
69%
71%
72%
73%
66%
71%
71%
72%
75%
79%
80%
80%
73%
78%
78%
71%
76%
80%
80%
81%
75%
78%
80%
70%
74%
78%
80%
79%
75%
77%
77%
LANEW505R
LANEW509R
9 VDC
5 VDC
(4.5 – 9 VDC)
LANEW512R
LANEW515R
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
3.3 VDC
5 VDC
170uF
110uF
LANEW505RD
LANEW512RD
LANEW515RD
LANEW1233R
LANEW1205R
LANEW1209R
LANEW1212R
LANEW1215R
LANEW1205RD
LANEW1212RD
LANEW1215RD
LANEW2433R
LANEW2405R
LANEW2409R
LANEW2412R
LANEW2415R
LANEW2405RD
LANEW2412RD
LANEW2415RD
LANEW4833R
LANEW4805R
LANEW4809R
LANEW4812R
LANEW4815R
LANEW4805RD
LANEW4812RD
LANEW4815RD
±470uF
±100uF
±47uF
2200uF
1000uF
470uF
9 VDC
12 VDC
(9 – 18 VDC)
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
3.3 VDC
5 VDC
170uF
110uF
±470uF
±100uF
±47uF
2200uF
1000uF
470uF
9 VDC
24 VDC
(18 – 36 VDC)
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
3.3 VDC
5 VDC
170uF
110uF
±470uF
±100uF
±47uF
2200uF
1000uF
470uF
60mA
9 VDC
56mA
48 VDC
(36 – 75 VDC)
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
55mA
170uF
110uF
55mA
62mA
±470uF
±100uF
±47uF
57mA
57mA
NOTES:
1. The LANEW Series requires a minimum 10% loading at the output to maintain specified regulation. Operation under
no-load condition will not damage these devices, however they may not meet all listed specifications.
2. It will not damage the device without inserting external input capacitors. There is a smaller reflected ripple current when
a capacitor is put at the input. The capacitor recommended is “CHEMICON” LXZ series or equivalent for 05 & 12Vin and
“CHEMICON” KMF series or equivalent for 24 & 48Vin.
3. BELLCORE TR-NWT-000332. Case: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment).
4. The LANEW series meet EN55022 classes A with a filter at input. The filter capacitor recommended is same as Note 2.
5. Maximum value at nominal input voltage and full load.
6. Typical value at nominal input voltage and full load.
7. Test by minimum Vin and constant resistive load.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
LANEW Series
Single and Dual Outputs
2:1 Wide Input Voltage Range
DERATING CURVE & EFFICIENCY GRAPHS
MECHANICAL DRAWING
PIN CONNECTION
Pin
1
Single Output
-INPUT
+INPUT
CTRL
Dual Output
-INPUT
2
+INPUT
CTRL
3
5
NC
NC
6
+OUTPUT
-OUTPUT
NC
+OUTPUT
COMMON
-OUTPUT
7
8
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
相关型号：
©2020 ICPDF网 联系我们和版权申明