LANK53.3W3H [WALL]
3000VDC I/O Isolation Single and Dual Output 3 Watt DC/DC Converter 24 Pin DIP & SMT Package 2:1 Wide Input Voltage Range; 3000VDC I / O隔离单输出和双输出3瓦的DC / DC转换器, 24引脚DIP和SMT封装2 : 1宽输入电压范围型号: | LANK53.3W3H |
厂家: | WALL INDUSTRIES,INC. |
描述: | 3000VDC I/O Isolation Single and Dual Output 3 Watt DC/DC Converter 24 Pin DIP & SMT Package 2:1 Wide Input Voltage Range |
文件: | 总3页 (文件大小:203K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LANK “H” Series
3000VDC I/O Isolation
Single and Dual Output
24 Pin DIP & SMT Package
2:1 Wide Input Voltage Range
FEATURES
UL E193009
TUV
● 3000VDC I/O Isolation
● Over Current Protection
CB
● MTBF > 3,000,000 Hours
● High Efficiency up to 80%
● 2:1 Wide Input Voltage Range
● 3 Watts Regulated Output Power
● International Safety Standard Approval
● Standard 24 Pin DIP Package and SMT Type Package
SPECIFICATIONS: LANK “H” Series
All specifications apply @ 25°C ambient unless otherwise noted
INPUT SPECIFICATIONS
GENERAL SPECIFICATIONS (CONTINUED)
Input Voltage Range ............ 5V nominal input......................... 4.5 - 6VDC
Isolation Voltage (Input to Output).........................................3000VDC min.
Isolation Resistance ...............................................................109 ohms min.
Isolation Capacitance ................................................................ 300pF max.
12V nominal input....................... 9 - 18 VDC
24V nominal input..................... 18 - 36 VDC
48V nominal input..................... 36 - 75 VDC
Input Filter....................................................................................... Pi Type
ENVIRONMENTAL SPECIFICATIONS
Input Surge Voltage (100ms max) ....... 5V input .............................15VDC
12V input ..........................36 VDC
Operating Temperature
Standard ........................................................................... -25°C ~ +71°C
“I” Suffix (See Note 7).......................................................-40°C ~ +71°C
24V input ..........................50 VDC
48V input ........................100 VDC
Storage Temperature ..........................................................-55°C ~ +105°C
Relative Humidity...................................................................5% to 95% RH
Thermal Shock .................................................................... MIL-STD-810D
Vibration ................................10~55Hz, 10G, 30 minutes along X, Y, and Z
MTBF (See Note 3) ............................................................3.69 x 106 hours
Input Reflected Ripple Current (Note 2)......................................120mAp-p
(nominal Vin and full load)
Start Up Time (nominal Vin and constant resistive load).............30ms typ.
OUTPUT SPECIFICATIONS
Output Voltage..............................................................................see table
Voltage Accuracy (nominal Vin and full load) ...................................... ±1%
Output Current ..............................................................................see table
Output Power.......................................................................... 3 watts max.
Line Regulation (LL to HL at FL)....................................................... ±0.2%
PHYSICAL SPECIFICATIONS
Weight
DIP Type.............................................................................. 14g (0.48 oz)
SMT Type ............................................................................ 15g (0.52 oz)
Dimensions................... 1.25 x 0.80 x 0.40 inches (31.8 x 20.3 x 10.2 mm)
Case Material ..................................................Non-conductive black plastic
Base Material...................................................Non-conductive black plastic
Potting material..................................................................Epoxy (UL94-V0)
Load Regulation (25% to 100% FL)......... Single Output.................. ±0.2%
Dual Output ....................... ±2%
Cross Regulation (Dual) (Asymmetrical load 25% / 100% FL) ............ ±5%
Minimum Load (See Note 1) ......................................................10% of FL
Ripple/Noise (20 MHz BW)...... 3.3V and 5V outputs ...................75mVp-p
others.........................1%/p-p of Vout max
SAFETY & EMC
Approvals and Standards .................. IEC60950-1, UL60950-1, EN60950-1
Conducted Emissions.................EN55022......................................Class A
Radiated Emissions....................EN55022......................................Class A
ESD ............................................EN61000-4-2.....................Perf. Criteria B
Radiated Immunity......................EN61000-4-3.....................Perf. Criteria A
Fast Transient.............................EN61000-4-4.....................Perf. Criteria B
Surge..........................................EN61000-4-5.....................Perf. Criteria B
Conducted Immunity...................EN61000-4-6.....................Perf. Criteria A
Temperature Coefficient ................................................. ±0.02% / °C max.
Transient Response Recovery Time (25% load step) .......................500us
PROTECTION SPECIFICATIONS
Over Load Protection (% of full load at nominal input)................ 180% typ.
Short Circuit Protection............................. continuous, automatic recovery
GENERAL SPECIFICATIONS
Efficiency.......................................................................................see table
Switching Frequency................................................................100KHz typ.
Due to advances in technology, specifications subject to change without notice
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
LANK “H” Series
3000VDC I/O Isolation
Single and Dual Output
24 Pin DIP & SMT Package
2:1 Wide Input Voltage Range
OUTPUT VOLTAGE / CURRENT RATING CHART
Capacitor Load (6)
Model Number
Input Range
Output Voltage
Output Current
Input Current (4)
Efficiency (5)
(max)
649mA
909mA
835mA
845mA
857mA
845mA
870mA
266mA
353mA
333mA
343mA
348mA
338mA
333mA
123mA
174mA
164mA
164mA
172mA
167mA
167mA
61mA
LANK53.3W3H
LANK505W3H
3.3 VDC
5 VDC
600mA
600mA
66%
70%
76%
75%
74%
75%
73%
70%
75%
79%
77%
76%
78%
79%
71%
76%
80%
80%
77%
79%
79%
72%
75%
79%
79%
77%
79%
79%
2200uF
1000uF
170uF
LANK512W3H
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
250mA
5 VDC
(4.5 – 6 VDC)
LANK515W3H
200mA
110uF
LANK505DW3H
LANK512DW3H
LANK515DW3H
LANK123.3W3H
LANK1205W3H
LANK1212W3H
LANK1215W3H
LANK1205DW3H
LANK1212DW3H
LANK1215DW3H
LANK243.3W3H
LANK2405W3H
LANK2412W3H
LANK2415W3H
LANK2405DW3H
LANK2412DW3H
LANK2415DW3H
LANK483.3W3H
LANK4805W3H
LANK4812W3H
LANK4815W3H
LANK4805DW3H
LANK4812DW3H
LANK4815DW3H
± 300mA
± 125mA
± 100mA
600mA
± 500uF
± 96uF
± 47uF
2200uF
1000uF
170uF
600mA
250mA
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12VDC
(9 – 18 VDC)
200mA
110uF
± 300mA
± 125mA
± 100mA
600mA
± 500uF
± 96uF
± 47uF
2200uF
1000uF
170uF
600mA
24 VDC
(18 – 36 VDC)
250mA
200mA
110uF
± 300mA
± 125mA
± 100mA
600mA
± 500uF
± 96uF
± 47uF
2200uF
1000uF
170uF
600mA
88mA
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
250mA
84mA
48VDC
(36 – 75 VDC)
200mA
84mA
110uF
± 300mA
± 125mA
± 100mA
86mA
± 500uF
± 96uF
± 47uF
84mA
84mA
NOTES
1. LANK ”H” Series requires a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will
not damage these devices, however they may not meet all listed specification.
2. Please add an external filter at converter input terminals when measuring input reflected ripple, as figure 1.
L: Simulated source impedance of 12uH C: Nippon chemi-con KMF series 47uF/100V
3. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment)
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistive load.
7. Add suffix “I” for –40°C to +71°C operation.
8. Add suffix “S” for surface mount type.
Figure 1
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
LANK “H” Series
3000VDC I/O Isolation
Single and Dual Output
24 Pin DIP & SMT Package
2:1 Wide Input Voltage Range
DERATING CURVE
MECHANICAL DRAWING
DIP TYPE
SMT TYPE
(add suffix “S”)
1. All dimensions in Inches (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
2. Pin pitch tolerance ±0.014(0.35)
DIP PIN CONNECTION
SMT PIN CONNECTION
PIN
SINGLE
DUAL
PIN
SINGLE
DUAL
PIN
SINGLE
DUAL
PIN
SINGLE
DUAL
2
3
- INPUT
- INPUT
- INPUT
- INPUT
23
22
+ INPUT + INPUT
+ INPUT + INPUT
2
3
- INPUT
- INPUT
- INPUT
- INPUT
23
22
+ INPUT + INPUT
+ INPUT + INPUT
9
10
11
NC
NC
NC
16
15
14
- OUTPUT COMMON
9
10
11
NC
NC
NC
NC
16
15
14
- OUTPUT COMMON
COMMON
NC
- OUTPUT
COMMON
NC
- OUTPUT
NC
NC
NC
NC
+ OUTPUT + OUTPUT
NC NC
NC
+ OUTPUT + OUTPUT
Others
Others
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
相关型号:
LANKH
3000VDC I/O Isolation Single and Dual Output 3 Watt DC/DC Converter 24 Pin DIP & SMT Package 2:1 Wide Input Voltage Range
WALL
©2020 ICPDF网 联系我们和版权申明