MD24D12-833 [WALL]
Up to 20 Watts DC/DC Power Converters Single and Dual Outputs;
| 型号： | MD24D12-833 |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | Up to 20 Watts DC/DC Power Converters Single and Dual Outputs |
| 文件： | 总8页 (文件大小：534K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MD SERIES
Up to 20 Watts
DC/DC Power Converters
Single and Dual Outputs
Rev E
Size: 2.0in x 1.0in x 0.4in (50.8mm x 25.4mm x 10.2mm)
OPTIONS
• Heatsink
• Negative Logic Remote
ON/OFF (Suffix “R”)
• Input Range
FEATURES
• 20 Watts Maximum Output Power
• Output Current up to 6A
• Single and Dual Outputs
• Standard 2.0in x 1.0in x 0.4in Package• CE Marked
• 2:1 Input Voltage Range
• High Efficiency up to 89%
• 1600VDC I/O Isolation
• Remote ON/OFF Control
• Fixed Switching Frequency
• Short Circuit, Over Voltage, and Over Load Protection
• Six-Sided Continuous Shield
• Output Voltage
• UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
• ISO9001 Certified Manufacturing Facilities
• RoHS & REACH compliant
• Heatsink Option
APPLICATIONS
DESCRIPTION
• Wireless Networks
• Telecom/Datacom
• Industry Control Systems
• Measurement Equipment
• Semiconductor Equipment
The MD series of DC/DC power converters provides up to 20 Watts of output power in a standard 2.0 x 1.0
x 0.4 inch package. This series has single and dual output models with 2:1 input voltage ranges of 9-
18VDC, 18-36VDC, and 36-75VDC. Some features include high efficiency up to 89%, 1600VDC I/O
isolation, remote ON/OFF, and voltage adjustability. This series is also protected against over voltage, over
load, and short circuit conditions. All models are RoHS compliant and have UL60950-1, EN60950-1, and
IEC60950-1 safety approvals.
MODEL SELECTION TABLE
Single Output
Output Current
Input Current
No Load(2) Full Load(3)
Input Voltage Output
Ripple &
Noise(1)
Output
Power
Maximum
Capacitive Load
Model Number
Efficiency
Range
Voltage
Min Load Max Load
MD12S1.5-6000
MD12S1.8-6000
MD12S2.5-6000
MD12S3.3-5000
MD12S5-4000
MD12S12-1670
MD12S15-1330
MD24S1.5-6000
MD12S1.8-6000
MD24S2.5-6000
MD24S3.3-5000
MD24S5-4000
MD24S12-1670
MD24S15-1330
MD48S1.5-6000
MD48S1.8-6000
MD48S2.5-6000
MD48S3.3-5000
MD48S5-4000
MD48S12-1670
MD48S15-1330
1.5VDC
1.8VDC
2.5VDC
3.3VDC
5VDC
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
6000mA
6000mA
6000mA
5000mA
4000mA
1670mA
1330mA
6000mA
6000mA
6000mA
5000mA
4000mA
1670mA
1330mA
6000mA
6000mA
6000mA
5000mA
4000mA
1670mA
1330mA
60mVp-p
60mVp-p
60mVp-p
60mVp-p
75mVp-p
75mVp-p
75mVp-p
60mVp-p
60mVp-p
60mVp-p
60mVp-p
75mVp-p
75mVp-p
75mVp-p
60mVp-p
60mVp-p
60mVp-p
60mVp-p
75mVp-p
75mVp-p
75mVp-p
70mA
75mA
80mA
115mA
75mA
90mA
35mA
35mA
45mA
40mA
30mA
35mA
55mA
40mA
15mA
20mA
30mA
15mA
20mA
35mA
50mA
1014mA
1200mA
1582mA
1698mA
2008mA
2037mA
2037mA
493mA
584mA
781mA
838mA
980mA
1006mA
1002mA
247mA
288mA
391mA
414mA
490mA
497mA
501mA
9W
10.8W
15W
16.5W
20W
20W
20W
9W
65,000µF
65,000µF
33,000µF
13,000µF
6,800µF
2,200µF
755µF
78%
79%
83%
85%
87%
86%
86%
80%
81%
84%
86%
89%
87%
87%
80%
82%
84%
87%
89%
88%
87%
12VDC
(9~18)
12VDC
15VDC
1.5VDC
1.8VDC
2.5VDC
3.3VDC
5VDC
65,000µF
65,000µF
33,000µF
13,000µF
6,800µF
2,200µF
755µF
10.8W
15W
16.5W
20W
20W
20W
9W
24VDC
(18~36VDC)
12VDC
15VDC
1.5VDC
1.8VDC
2.5VDC
3.3VDC
5VDC
65,000µF
65,000µF
33,000µF
13,000µF
6,800µF
2,200µF
755µF
10.8W
15W
16.5W
20W
20W
20W
48VDC
(36-75VDC)
12VDC
15VDC
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 1 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
MD SERIES
Up to 20 Watts
DC/DC Power Converters
Single and Dual Outputs
Rev E
MODEL SELECTION TABLE
Dual Output
Input Voltage Output
Output Current
Min Load Max Load
Ripple &
Input Current
No Load(2) Full Load(3)
Output
Power
Maximum
Efficiency
Model Number
Range
Voltage
Noise(1)
Capacitive Load(4)
MD12D12-833
MD12D15-667
MD24D12-833
MD24D15-667
MD48D12-833
MD48D15-667
±12VDC
±15VDC
±12VDC
±15VDC
±12VDC
±15VDc
0mA
0mA
0mA
0mA
0mA
0mA
±833mA
±667mA
±833mA
±667mA
±833mA
±667mA
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
45mA
50mA
30mA
30mA
20mA
20mA
2032mA
2034mA
1004mA
993mA
496mA
496mA
20W
20W
20W
20W
20W
20W
±680µF
±450µF
±680µF
±450µF
±680µF
±450µF
86%
86%
87%
88%
88%
88%
12VDC
(9~18)
24VDC
(18-36VDC)
48VDC
(36-75VDC
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
12VDC nominal input models
9
18
36
12
24
48
18
36
75
36
50
Operating Input Voltage Range
Input Surge Voltage (100ms max)
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
Nominal Input and Full Load
VDC
VDC
100
Input Reflected Ripple Current
Input Filter
20
mAp-p
L-C Type
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
Load Regulation
Voltage Adjustability(Single Outputs)
Cross Regulation (Dual Outputs)
Output Power
See Table
+1.0
-1.0
-0.2
-0.5
-10
-5
%
%
%
%
%
Low Line to High Line at Full Load
No Load to Full Load
+0.2
+0.5
+10
+5
Asymmetrical load 25%/100% Full Load
See Table
Output Current
See Table
Minimum Load
0
%
Maximum Capacitive Load
Ripple & Noise (20MHz bandwidth)
Transient Response Recovery Time
See Table
See Table
250
10
10
Measured with a 0.1µF/50V MLCC
25% load step change
µs
ms
Power Up
Start-Up Time
Constant Resistive Load
Remote ON/OFF
Temperature Coefficient
REMOTE ON/OFF CONTROL(5)
Positive Logic
(Standard)
Negative Logic
-0.02
-0.5
+0.02
%/ºC
DC/DC ON
DC/DC OFF
DC/DC ON
DC/DC OFF
Open or 3~12VDC
Short or 0~1.2VDC
Short or 0~1.2VDC
Open or 3~12VDC
+0.5
(Option)
Input Current of CTRL Pin
Remote OFF Input Current
PROTECTION
mA
mA
2.5
Short Circuit Protection
Over Load Protection
Continuous, Automatic Recovery
% of lout rated
150
3.9
6.2
%
1.5V, 1.8V, 2.5V, and 3.3V Models
5V Models
12V Models
Over Voltage Protection
Zener Diode Clamp
VDC
15
18
15V Models
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature
Maximum Case Temperature
Storage Temperature Range
Relative Humidity
With Derating
-40
+100
+100
+125
95
ºC
ºC
ºC
-55
5
% RH
Natural Convection without Heat-Sink
Natural Convection with Heat-Sink
12
10
Thermal Impedance(6)
ºC/Watt
Thermal Shock
Vibration
MTBF
MIL-STD-810F
MIL-STD-810F
1,583,000 hours
MIL-HDBK-217, Full Load
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 2 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
MD SERIES
Up to 20 Watts
DC/DC Power Converters
Single and Dual Outputs
Rev E
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
GENERAL SPECIFICATIONS
Efficiency
TEST CONDITIONS
Min
Typ
Max
550
Unit
Nominal Vin and Full Load
See Table
500
Switching Frequency
450
KHz
Input to Output
Input to Case
Output to Case
1600
1600
1600
1
Isolation Voltage
1 minute
500VDC
VDC
Isolation Resistance
Isolation Capacitance
PHYSICAL SPECIFICATIONS
Weight
GΩ
pF
1000
0.95oz (27g)
2in x 1in x 0.4in
Dimensions (L x W x H)
(50.8mm x 25.4mm x 10.2mm)
Case Material
Nickel-Coated Copper
Base Material
Potting Material
Non-Conductive Black Plastic
Epoxy (UL94 V-0)
SAFETY & EMC CHARACTERISTICS
UL60950-1
EN60950-1
IEC60950-1
Safety Approvals
Class A
Class B
EMI(7)
ESD
EN55022
Air ±8KV
Contact ±6KV
10 V/m
±2KV
±1KV
EN61000-4-2
Perf. Criteria B
Radiated Immunity
Fast Transient(8)
Surge(8)
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
Perf. Criteria A
Perf. Criteria A
Perf. Criteria B
Perf. Criteria A
Perf. Criteria A
Conducted Immunity
10 Vr.m.s
100A/m continuous; 1000A/m 1 second
NOTES
(1) Typical Value at Nominal Input and Full Load.
(2) Typical Value at Nominal Input Voltage and No Load.
(3) Maximum Value at Nominal Input Voltage and Full Load.
(4) Test by minimum Vin and Constant Resistive Load.
(5) The ON/OFF control pin is referenced to –Vin.
To order Negative logic Remote ON/OFF add the suffix “R” to the model number (Ex: MD48S5-4000R).
(6) Heatsink is optional and P/N: 7G-0020C-F
(7) The MD series can meet EN5022 Class A with an external capacitor in parallel with the input pins.
Recommended: 12Vin Models: 4.7µF/50V 1812 MLCC
24Vin Models: 2.2µF/50V 1812 MLCC
48Vin Models: 2.2µF/100V 1812 MLCC
(8) An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor suggested is Nippon
chemi-con KY series, 220µF/100V, ESR 48mΩ.
(9) CAUTION: The power module is not internally fused. An input line fuse must always be used.
Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
1/9/2018
Fax 603-778-9797
Page 3 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
MD SERIES
Up to 20 Watts
DC/DC Power Converters
Single and Dual Outputs
Rev E
DERATING CURVES
MD48S5-4000 Derating Curve
MD48S5-4000 Derating Curve with Heatsink
EFFICIENCY GRAPHS
MD48S5-4000 Efficiency vs. Input Voltage
MD48S5-4000 Efficiency vs. Output Load
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 4 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
MD SERIES
Up to 20 Watts
DC/DC Power Converters
Single and Dual Outputs
Rev E
MECHANICAL DRAWINGS
PIN CONNECTION
PIN
1
SINGLE
+Vin
DUAL
+Vin
2
-Vin
-Vin
3
4
5
6
+Vout
Trim
-Vout
Ctrl
+Vout
Common
-Vout
Ctrl
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using the
method shown below
1. All dimensions in inch (mm)
2. Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
3. Pin pitch tolerance ±0.01 (0.25)
4. Pin dimension tolerance ±0.004(0.1)
REMOTE ON/OFF CONTROL
The remote ON/OFF pin allows the user to turn the DC/DC power module on during a logic high and off during a logic low. Figure 2
gives several examples of acceptable configurations. The remote ON/OFF pin is an open collector/drain logic input signal (Von/off) that
has –Vin as the reference voltage. If not using the remote on/off feature, open the circuit between the on/off pin and the –input pin to
turn the module on.
Remote ON/OFF Implementation
Isolated-Closure Remote ON/OFF
Level Control Using TTL Output
Level Control Using Line Voltage
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 5 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
MD SERIES
Up to 20 Watts
DC/DC Power Converters
Single and Dual Outputs
Rev E
OUTPUT VOLTAGE ADJUSTMENT
Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of a module. This is
accomplished by connecting an external resistor between the TRIM pin and either the +Vout or -Vout pins. With an external resistor
between the TRIM and -Vout pin, the output voltage set point increases. With an external resistor between the TRIM and +Vout pin,
the output voltage set point decreases.
MDxxS1.5-5500
MDxxS1.8-5500
Trim Trimup
Rup
Trimdown
Rdown
Trim Trimup
Rup
Trimdown
Rdown
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
1.818V 11.639 kΩ 1.782V 14.66 kΩ
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
1.515V
1.53V
4.578 kΩ
2.065 kΩ
1.227 kΩ
0.808 kΩ
0.557 kΩ
0.389 kΩ
0.27 kΩ
0.18 kΩ
0.11 kΩ
0.054 kΩ
1.485V 5.704 kΩ
1.836V
1.854V
1.872V
1.89V
5.205 kΩ
3.06 kΩ
1.764V
6.57 kΩ
1.47V
1.455V 1.527 kΩ
1.44V 1.005 kΩ
1.425V 0.692 kΩ
1.41V 0.483 kΩ
1.395V 0.334 kΩ
1.38V 0.222 kΩ
1.365V 0.135 kΩ
2.571 kΩ
1.746V 3.874 kΩ
1.728V 2.525 kΩ
1.545V
1.56V
1.988 kΩ
1.344 kΩ
0.915 kΩ
0.609 kΩ
0.379 kΩ
0.2 kΩ
1.71V
1.716 kΩ
1.575V
1.59V
1.908V
1.926V
1.944V
1.962V
1.98V
1.692V 1.177 kΩ
1.674V 0.792 kΩ
1.656V 0.503 kΩ
1.638V 0.278 kΩ
1.605V
1.62V
1.635V
1.65V
0.057 kΩ
1.62V
0.098 kΩ
1.35V
0.065 kΩ
MDxxS2.5-5500
MDxxS3.3-5000
Trim Trimup
Rup
Trimdown
Rdown
Trim Trimup
Rup
Trimdown
Rdown
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
2.525V 37.076 kΩ 2.475V 49.641 kΩ
1%
2%
3%
4%
5%
6%
7%
8%
9%
3.333V 57.930 kΩ 3.267V 69.470 kΩ
3.366V 26.165 kΩ 3.234V 31.235 kΩ
3.399V 15.577 kΩ 3.201V 18.490 kΩ
3.432V 10.283 kΩ 3.168V 12.117 kΩ
2.55V
2.575V
2.6V
16.675 kΩ
9.874 kΩ
6.474 kΩ
4.434 kΩ
3.074 kΩ
2.102 kΩ
1.374 kΩ
0.807 kΩ
0.354 kΩ
2.45V 22.481 kΩ
2.425V 13.428 kΩ
2.4V
2.375V 6.186 kΩ
2.35V 4.375 kΩ
2.325V 3.082 kΩ
2.3V 2.112 kΩ
2.275V 1.358 kΩ
2.25V 0.754 kΩ
8.902 kΩ
2.625V
2.65V
2.675V
2.7V
3.465V
3.498V
3.531V
3.564V
3.597V
7.106 kΩ
4.988 kΩ
3.476 kΩ
2.341 kΩ
1.459 kΩ
0.753 kΩ
3.135V 8.294 kΩ
3.102V 5.745 kΩ
3.069V 3.924 kΩ
3.036V 2.559 kΩ
3.003V 1.497 kΩ
2.970V 0.647 kΩ
2.725V
2.75V
10% 3.630V
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 6 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
MD SERIES
Up to 20 Watts
DC/DC Power Converters
Single and Dual Outputs
Rev E
MDxxS5-4000
MDxxS12-1670
Trim Trimup
Rup
Trimdown
Rdown
Trim Trimup
Rup
Trimdown
Rdown
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
5.050V 36.570 kΩ 4.950V 45.533 kΩ
5.100V 16.580 kΩ 4.900V 20.612 kΩ
5.150V 9.917 kΩ 4.850V 12.306 kΩ
1% 12.120V 367.908 kΩ 11.880V 460.992 kΩ
2% 12.240V 165.954 kΩ 11.760V 207.946 kΩ
3% 12.360V 98.636 kΩ 11.640V 123.597 kΩ
4% 12.480V 64.977 kΩ 11.520V 81.423 kΩ
5% 12.600V 44.782 kΩ 11.400V 56.118 kΩ
6% 12.720V 31.318 kΩ 11.280V 39.249 kΩ
7% 12.840V 21.701 kΩ 11.160V 27.199 kΩ
8% 12.960V 14.488 kΩ 11.040V 18.162 kΩ
9% 13.080V 8.879 kΩ 10.920V 11.132 kΩ
10% 13.200V 4.391 kΩ 10.800V 5.509 kΩ
5.200V 6.585 kΩ 4.800V
5.250V 4.586 kΩ 4.750V
5.300V 3.253 kΩ 4.700V
5.350V 2.302 kΩ 4.650V
5.400V 1.588 kΩ 4.600V
5.450V 1.032 kΩ 4.550V
5.500V 0.588 kΩ 4.500V
8.152 kΩ
5.660 kΩ
3.999 kΩ
2.812 kΩ
1.922 kΩ
1.230 kΩ
0.676 kΩ
MDxxS15-1330
MDxxD12-833
Trim Trimup
Rup
Trimdown
Rdown
Trim
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
Trimup
Rup
Trimdown
Rdown
24.24V 218.21 kΩ 23.76V 273.44 kΩ
24.48V 98.105 kΩ 23.52V 123.02 kΩ
1%
2%
3%
4%
5%
6%
7%
8%
9%
15.150V 404.184 kΩ 14.850V 499.816 kΩ
15.300V 180.592 kΩ 14.700V 223.408 kΩ
15.450V 106.061 kΩ 14.550V 131.272 kΩ
15.600V 68.796 kΩ 14.400V 85.204 kΩ
15.750V 46.437 kΩ 14.250V 57.563 kΩ
15.900V 31.531 kΩ 14.100V 39.136 kΩ
16.050V 20.883 kΩ 13.950V 25.974 kΩ
16.200V 12.898 kΩ 13.800V 16.102 kΩ
16.350V 6.687 kΩ 13.650V 8.424 kΩ
24.72V
24.96V 38.052 kΩ 23.04V 47.803 kΩ
25.2V 26.042 kΩ 22.8V 32.76 kΩ
58.07 kΩ
23.28V 72.874 kΩ
25.44V 18.035 kΩ 22.56V 22.732 kΩ
25.68V 12.316 kΩ 22.32V 15.568 kΩ
25.92V
26.16V
26.4V
8.026 kΩ
4.69 kΩ
22.08V 10.196 kΩ
21.84V 6.017 kΩ
2.021 kΩ
21.6V
2.675 kΩ
10% 16.500V 1.718 kΩ 13.500V 2.282 kΩ
MDxxD15-667
Trim Trimup
Rup
Trimdown
Rdown
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
30.3V
30.6V
30.9V
31.2V
31.5V
31.8V
32.1V
32.4V
32.7V
33V
268.29 kΩ 29.7V 337.71 kΩ
120.64 kΩ 29.4V 152.02 kΩ
71.429 kΩ 29.1V 90.126 kΩ
46.822 kΩ 28.8V 59.178 kΩ
32.058 kΩ 28.5V 40.609 kΩ
22.215 kΩ 28.2V
28.23 kΩ
15.184 kΩ 27.9V 19.387 kΩ
9.911 kΩ
5.81 kΩ
27.6V 12.756 kΩ
27.3V
27V
7.598 kΩ
3.471 kΩ
2.529 kΩ
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 7 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
MD SERIES
Up to 20 Watts
DC/DC Power Converters
Single and Dual Outputs
Rev E
RECOMMENDED FILTERS
Recommended Filter for EN55022 Class B Compliance
Recommended EN55022 Class B Filter Circuit Layout
The componenets used in the figure above are as follows:
C1
C2
C3
C4
L1
450µH
Common Choke
PMT-048
450µH
Common Choke
PMT-048
325µH
Common Choke
PMT-050
3.3µF/50V
1812 MLCC
3.3µF/50V
1812 MLCC
1000pF/2KV
MLCC
1000pF/2KV
MLCC
MD12xxx-xxxx
MD24xxx-xxxx
MD48xxx-xxxx
4.7µF/50V
1812 MLCC
1000pF/2KV
MLCC
1000pF/2KV
MLCC
N/A
2.2µF/100V
1812 MLCC
2.2µF/100V
1812 MLCC
1000pF/2KV
MLCC
1000pF/2KV
MLCC
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 8 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号：
MD2500-LF
Rectifier Diode, 1 Phase, 1 Element, 25A, 50V V(RRM), Silicon, ROHS COMPLIANT, PRESSFIT-1
WTE
©2020 ICPDF网 联系我们和版权申明