PSCPF100-48S [WALL]
AC-DC Power Factor Correction Module,;
| 型号： | PSCPF100-48S |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | AC-DC Power Factor Correction Module, |
| 文件： | 总4页 (文件大小：438K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PSCPF100 SERIES
Up to 102.6 Watts
AC/DC Power Supply
Single Output
Rev A
FEATURES
• Universal AC Input/Full Range of
85~264VAC (120~370VDC)
• Built-In Active PFC Function
• Remote ON/OFF Control
• LED Indicator for Power On
• Built-In Constant Current Limiting
Circuit
• Short Circuit, Over Load, Over Voltage, and Over
Temperature Protection
• Over Voltage Category III
• Cooling by Free Air Convection
• 1U Low Profile 30mm
• UL60950-1, TUV EN60950-1, EN61558-1,
EN61558-2-16, EAC TP TC 004, and CCC
GB4943.1 Safety Approvals
• 100% Full Load Burn-In Test
DESCRIPTION
The PSCPF100 series of AC/DC power supplies offers up to 102.6 watts of output power in a
7.05” x 3.90” x 1.18” enclosed package. This series consists of single output models with a
universal AC input of 85~264VAC (120~370VDC). Each model in this series features remote
on/off control, built-in active PFC function and constant current limiting circuit, as well as an
LED indicator for power on. This series also has protection against short circuit, over load,
over voltage, and over temperature conditions and UL60950-1, TUV EN60950-1, EN61558-
1, EN61558-2-16, EACH TP TC 004, and CCC GB4943.1 safety approvals.
Size: 7.05 x 3.90 x 1.18in (179 x 99 x 30mm)
MODEL SELECTION TABLE
Input Voltage
Range
Output
Voltage
3.3VDC
5VDC
7.5VDC
12VDC
13.5VDC
15VDC
24VDC
27VDC
48VDC
Output Current
Ripple &
Voltage Adj.
Range
Rated Output
Power
66W
100W
101.25W
102W
101.25W
100.5W
100.8W
102.6W
100.8W
Over Voltage
Protection
Model Number
Efficiency
Min Load Max Load
Noise(2)
PSCPF100-3.3S
PSCPF100-5S
PSCPF100-7.5S
PSCPF100-12S
PSCPF100-13.5S
PSCPF100-15S
PSCPF100-24S
PSCPF100-27S
PSCPF100-48S
0A
0A
0A
0A
0A
0A
0A
0A
0A
20A
20A
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
150mVp-p
150mVp-p
250mVp-p
3.14~3.63VDC
4.75~5.5VDC
7.13~8.25VDC
11.4~13.2VDC
12.8~14.9VDC
14.3~16.5VDC
22.8~26.4VDC
25.7~29.7VDC
45.6~52.8VDC
3.63~4.46VDC
5.5~6.75VDC
8.25~10.13VDC
13.2~16.2VDC
14.85~18.23VDC
16.5~20.25VDC
26.4~32.4VDC
29.7~36.45VDC
52.8~64.8VDC
83%
86%
87%
86%
86.5%
87%
87%
87%
88%
13.5A
8.5A
7.5A
6.7A
4.2A
3.8A
2.1A
85~264VAC
(120~370VDC)
SPECIFICATIONS
All specifications are based on 25°C Ambient Temperature, 230VAC Input, and Rated Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
85
120
47
264
370
63
VAC
VDC
Hz
Input Voltage Range
Frequency Range
AC Current
115VAC
230VAC
230VAC, Cold Start
1.1
0.55
30
A
A
Inrush Current
Input Current
Leakage Current
240VAC
2
mA
230VAC, Full Load
115VAC, Full Load
>0.93
>0.98
Power Factor
OUTPUT SPECIFICATIONS
Output Voltage
See Table
3.3VDC, 5VDC, & 7.5VDC Models
Other Models
±2.0
±1.0
±0.5
±1.0
±0.5
Voltage Tolerance(3)
%
%
%
Line Regulation
3.3VDC, 5VDC, & 7.5VDC Models
Other Models
Load Regulation
Output Power
Output Current
Ripple & Noise(1)
Setup Time
See Table
See Table
See Table
600
30
16
Full Load
Full Load
Full Load
0~50ºC
ms
ms
ms
Rise Time
Hold Up Time
Temperature Coefficient
Remote Control
±0.05
%/ºC
CN1: <0~0.8VDC Power On, 4~10VDC Power Off
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/29/2018
Page 1 of 4
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSCPF100 SERIES
Up to 102.6 Watts
AC/DC Power Supply
Single Output
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
PROTECTION
TEST CONDITIONS
Min
Typ
Max
Unit
Short Circuit Protection
Yes
135
Constant current limiting, recovers automatically after fault condition is
removed
% Rated
Output Power
Over Load Protection
105
Shut down o/p voltage, re-power on to recover
See Table for Ranges
Over Voltage Protection
Over Voltage Category III; According to EN61558, EN50178, EN60664-1,
EN62477-1, altitude up to 2000 meters
Over Temperature Protection
Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENTAL SPECIFICATIONS
Working Temperature
Storage Temperature
Working Humidity
Storage Humidity
Vibration
See Derating Curve
-30
-40
20
+70
+85
90
ºC
ºC
%RH
%RH
Non-Condensing
10
95
10~500Hz, 2G 10min/1cycle, 60min. each along X, Y, Z axes
MIL-HDBK-217F, 25ºC
MTBF
288.5
Khours
GENERAL SPECIFICATIONS
Efficiency
See Table
4KVAC
I/P-O/P
Withstand Voltage
I/P-FG
2KVAC
O/P-FG
0.5KVAC
Isolation Resistance
PHYSICAL SPECIFICATIONS
Weight
I/P-O/P, I/P-FG, O/P-FG
100MΩ/500VDC/25ºC/70%RH
18.34oz (520g)
7.05in x 3.90in x 1.18in
(179mm x 99mm x 30mm)
24pcs/14.5kg/0.84CUFT
Dimensions (L x W x H)
Packing
SAFETY CHARACTERISTICS
UL60950-1
TUV EN60950-1
EN61558-1
EN61558-2-16
Safety Approvals
EAC TP TC 004
CCC GB4943.1
EN55032 (CISPR32)
EN61000-3-2,-3
EAC TP TC 020
GB9254
Class B
EMC Emission
EMC Immunity
Class B
GB17625.1
EN61000-4-2, 3, 4, 5, 6, 8, 11
EN55024
Light Industry Level
Criteria A
EAC TP TC 020
NOTES
1. Ripple & Noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Tolerance includes set up tolerance, line regulation, and load regulation.
3. The power supply is considered a component which will be installed into final equipment. Final equipment must be re-confirmed that it still meets
EMC directives.
4. It is strongly recommended that external output capacitances should not exceed 5000uF (only for 3.3VDC, 5VDC, and 7.5VDC models)
5. Ambient temperature derating of 3.5ºC/1000m with fanless models and of 5ºC/1000m with fan models for operating altitude higher than 2000m
(6500ft).
6. This product is listed to applicable standards and requirements by UL.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
11/29/2018
Fax 603-778-9797
Page 2 of 4
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSCPF100 SERIES
Up to 102.6 Watts
AC/DC Power Supply
Single Output
Rev A
DERATING CURVES
Derating Curve
Output Derating vs. Input Voltage
BLOCK DIAGRAM
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/29/2018
Page 3 of 4
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSCPF100 SERIES
Up to 102.6 Watts
AC/DC Power Supply
Single Output
Rev A
MECHANICAL DRAWINGS
Terminal Pin No. Assignment
Pin No.
Assignment
1
2
AC/L
AC/N
3
FG
4,5
6,7
DC OUTPUT –V
DC OUTPUT +V
Remote ON/OFF (CN1): JST S2B-XH or
equivalent (optional)
Pin Assignmen
Mating
Housing
JST XHP or
equivalent
Terminal
No.
1
t
RC+
RC-
JST SXH-001T-
P0.6 or equivalent
2
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/29/2018
Page 4 of 4
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号：
PSCQ-2-14+
Combiner, 12MHz Min, 16MHz Max, 0.6dB Insertion Loss-Max, ROHS COMPLIANT, CASE A01, 8 PIN
MINI
©2020 ICPDF网 联系我们和版权申明