PSGKF-200-12 [WALL]
Watt AC/DC Switching Power Supplies;型号: | PSGKF-200-12 |
厂家: | WALL INDUSTRIES,INC. |
描述: | Watt AC/DC Switching Power Supplies |
文件: | 总4页 (文件大小:130K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PSGKF-200 SERIES
Rev A
200 Watt AC/DC Switching Power Supplies
Wall Industries, Inc.
FEATURES
• RoHS Compliant
• Conformal Coating on Both Sides of PCB
• 200 Watts Output Power
• 3000VAC I/O Isolation
• -25°C to +70°C Wide Operating Temperature Range
• All Using 105°C Long Life Electrolytic Capacitors
• Withstand 300VAC Surge Input for 5 Sec.
• High Efficiency up to 87.5%
• Operating Altitude up to 5000M
• 100% Full Load Burn-in Test
• Universal Input Voltage Range: 85-264VAC (120-370VDC)
• Over Load, Over Power, and Short Circuit Protection
• Built-in Cooling Fan Speed Control • 5V, 12V, 24V, and 48VDC Single Output Models
• Built-in Active PFC, PF > 0.95
• Adjustable Output Voltage
• UL60950-1 (2nd edition), IEC60950-1:2005 (2nd edition),
EN60950-1:2006 Safety Approvals
DESCRIPTION
The PSGKF-200 series of AC/DC switching power supplies provides 200 Watts of output power in a
7.83” x 3.90” x 1.97” enclosed case with built-in cooling fan speed control. This series consists of
5V, 12V, 24V, and 48VDC single output models with an input voltage range of 85~264VAC
(120~370VDC). Some features include high efficiency up to 87.5%, built-in active PFC, and -25°C to
+70°C operating temperature range. This series also has short circuit, over load, and over power
protection. All models are RoHS compliant and have UL60950-1 (2nd edition), IEC60950-1:2005
(2nd edition), and EN60950-1:2006 safety approvals.
Size:
7.83 x 3.90 x 1.97 inches
199.0 x 99.0 x 50.0 mm
Weight:
2.1 lbs (950g)
MODEL SELECTION TABLE
Output Current
Model Number
Input Voltage Range
Output Voltage
Ripple & Noise (1)
Output Power
Efficiency
Min
0A
Max
40A
PSGKF-200-5
PSGKF-200-12
PSGKF-200-24
PSGKF-200-48
NOTES
5 VDC
12 VDC
24 VDC
48 VDC
150mVp-p
150mVp-p
200mVp-p
200mVp-p
200W
200W
79%
84%
0A
0A
0A
16.7A
8.4A
4.2A
85 ~ 264 VAC
(120 ~ 370 VDC)
201.6W
201.6W
86%
87.5%
1. Ripple & noise is measured at 20MHz limited bandwidth and using a 12" twisted pair-wire terminated with a 0.1µF & 47µF capacitors in parallel.
2. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still
meets EMC directives.
DERATING CURVE
100
90
80
70
60
50
40
30
20
10
0
-25
0
10 20 30 40 50 60 70 80 90 100
Ambient Temperature (°C)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
12/11/2013
Page 1 of 4
PSGKF-200 SERIES
Rev A
200 Watt AC/DC Switching Power Supplies
Wall Industries, Inc.
SPECIFICATIONS: PSGKF-200 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
AC input voltage range
DC input voltage range
85
120
47
264
370
63
VAC
VDC
Hz
Input Voltage
Input Frequency
AC Current
3.5
30
A
At 115VAC and cold start
At 230VAC and cold start
At 115VAC
Inrush Current
Power Factor
A
50
0.98
0.95
At 230VAC
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Voltage Accuracy
Voltage Adjustability
Line Regulation
-1.0
-5
+1.0
+10
+0.5
+1.0
%
%Vo
%
Low Line to High Line
0% to 100% full load
-0.5
-1.0
Load Regulation
%
Output Power
See Table
Output Current
See Table
See Table
Ripple & Noise
Measured at 20MHz BW and with 0.1µF and 47µF capacitors in parallel
At 230VAC and full load
Hold-up Time
10
ms
s
Setup Time
At 230VAC and full load
2
Temperature Coefficient
Overshoot and Undershoot
PROTECTION
-0.03
+0.03
5.0
%/°C
%
Short Circuit Protection
Over Power Protection
Over Load Protection
GENERAL SPECIFICATIONS
Efficiency
Long term mode, auto-recovery
Hiccup mode, automatic-recovery
Hiccup mode, automatic-recovery
105
105
150
150
%Po
%Io
See Table
Primary to Secondary
Primary to PG
≤ 10mA
≤ 10mA
≤ 10mA
3000
1500
500
Withstand Voltage
VDC
Secondary to PG
Isolation Resistance
Leakage Current
100
MΩ
mA
Input to Output
Input to PG
0.25
1.0
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Cooling
See derating curve
-25
-40
20
+70
°C
+85
°C
Non-condensing
90
95
% RH
% RH
Non-condensing
10
Built-in DC fan
Cooling by forced air
MTBF
MIL-HDBK-217F; 25°C and full load
200,000
hours
Vibration
10~150Hz, 2G 10 min./1 cycle, period for 60 min. each along X, Y, Z axes
PHYSICAL SPECIFICATIONS
Weight
2.1 lbs (950g)
Dimensions (L x W x H)
SAFETY & EMI (See Note 2)
Safety Approvals
7.83 x 3.90 x 1.97 inches (199.0 x 99.0 x 50.0 mm)
UL60950-1 (2nd edition), IEC60950-1:2005 (2nd edition), EN60950-1:2006
EN55022, EN55024 Class B
Conduction & Radiation
Harmonic Current
EMS Immunity
EN61000-3-2,-3
EN61000-4-2,3,4,5,6,8,11; EN55024, EN61000-6-2 heavy industry level
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
12/11/2013
Page 2 of 4
PSGKF-200 SERIES
Rev A
200 Watt AC/DC Switching Power Supplies
Wall Industries, Inc.
BLOCK DIAGRAM
FAN SPEED
FAN
CONTROL
EMI
FILTER
ACTIVE INRUSH
CURRENT LIMITING
POWER
SWITCHING
+V
-V
RECTIFIERS
& FILTER
I/P
RECTIFIERS
DETECTION
CIRCUIT
FG
O.L.P.
PFC & PWM
CONTROL
O.V.P.
O.L.P.
MECHANICAL DRAWING
Unit: inches [mm]
7.83 [199.0]
2.56 [65.0]
4.96 [126.0]
0.47 [12.0]
2.52 [64.0]
0.98 [25.0]
4.61 [117.0]
1.97 [50.0]
1.30 [33.0]
RV1
9
8
7
FAN
S1
6
2 - M4
5
4
FG
3
2
4 - M3
1
CON1
0.28 [7]
5.91 [150.0]
Fixture A (131400003101)
Customer Plate
SMPS Cover
7.84 [199.0]
0.33
[8.5]
Assembly Screw
Fixture B (131400003201)
L
L ≤ 4mm
0.98 [25.0]
5.91 [150.0]
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
12/11/2013
Page 3 of 4
PSGKF-200 SERIES
Rev A
200 Watt AC/DC Switching Power Supplies
Wall Industries, Inc.
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will
provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one
example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its
customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing
support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
ꢀ(603)778-2300
ꢀ(888)597-9255
ꢀ(603)778-9797
E-mail:
Web:
Address:
sales@wallindustries.com
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
12/11/2013
Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明