PSHF240W-SF-24 [WALL]
AC-DC Regulated Power Supply Module,;型号: | PSHF240W-SF-24 |
厂家: | WALL INDUSTRIES,INC. |
描述: | AC-DC Regulated Power Supply Module, |
文件: | 总4页 (文件大小:462K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATASHEET
Rev. B
PSHF240W SERIES
85~132 / 170~264VAC Input Selectable by Switch
Up to 240 Watts Output Power
5, 7.5, 12, 15, 24, 30, & 48VDC Single Outputs
AC/DC Switching Power Supplies
FEATURES
• RoHS Compliant
• Single Outputs
• ±10% Voltage Adjustment Range
• Free Air Convection
• 7.83” x 4.33” x 1.97” Enclosed Case
• Up to 240W Output Power
• 85~132/170~264VAC Input Selectable by Switch
• High Reliability
• Short Circuit, Over Current, Over Voltage Protection
• UL60950, EN60950, GB4943, and CE Approvals
DESCRIPTION
The PSHF240W series of AC/DC power supplies offers up to 240W of output power in a 7.83” x 4.33” x 1.97”
enclosed case. This series consists of 5, 7.5, 12, 15, 24, 30 and 48VDC single output models with an input
voltage range of 85~132 / 170~264VAC selectable by switch. These supplies have a ±10% output adjustment
range and are protected against short circuit, over current, and over voltage conditions. This series is RoHS
compliant and has UL60950, EN60950, GB4943, and CE approvals.
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/18/2019
Page 1 of 4
PSHF240W Series
Single Outputs
Up to 240 Watts
Rev. B
AC/DC Switching Power Supplies
SPECIFICATIONS: PSHF240W Series
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Nom
Max
Unit
INPUT SPECIFICATIONS
Input Voltage Range
Selected by switch
85~132 / 170~264VAC
At 115VAC
At 230VAC
20
40
63
Inrush Current
Cold start
A
Input Frequency
47
Hz
OUTPUT SPECIFICATIONS
Output Voltage
See Table
+10
Output Voltage Adjustment Range
Line Regulation
-10
%
%
%
Full load
-0.5
+0.5
Load Regulation
0.5
Output Current
See Table
See Table
See Table
50
Output Power
Ripple & Noise
Rise Time
Full load
Full load
ms
ms
Hold-up Time
20
PROTECTION
Over Current Protection
Over Voltage Protection
Short Circuit Protection
GENERAL SPECIFICATIONS
Efficiency
110
115
130
150
%
%
Yes
See Table
Input to Output
Input to FG
3000
1500
500
Withstand Voltage
Leakage Current
All for 1 minute
VAC
mA
°C
Output to FG
At 230VAC
0.7
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
-10
20
+50
Operating Humidity
Storage Temperature
Storage Humidity
non-condensing
non-condensing
93
% RH
°C
-20
20
+85
95
% RH
Cooling Method
Free air convection
PHYSICAL SPECIFICATIONS
Weight
2 lbs (910g)
7.83 x 4.33 x 1.97 inches
(199 x 110 x 50 mm)
Dimensions (L x W x H)
SAFETY & EMC CHARACTERISTICS
Safety Standards
UL60950(1), EN60950, GB4943
GB9254, EN55022 Class A
EMC Standards
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/18/2019
Page 2 of 4
PSHF240W Series
Single Outputs
Up to 240 Watts
Rev. B
AC/DC Switching Power Supplies
NOTES
1. This product is Listed to applicable standards and requirements by UL.
*Due to advances in technology, specifications subject to change without notice.
MODEL SELECTION TABLE
Model Number
Input Voltage Range
Output Voltage
Output Current
Ripple & Noise
Output Power
Efficiency
PSHF240W-SF-5
PSHF240W-SF-7.5
PSHF240W-SF-12
PSHF240W-SF-15
PSHF240W-SF-24
PSHF240W-SF-30
PSHF240W-SF-48
5 VDC
7.5 VDC
12 VDC
15 VDC
24 VDC
30 VDC
48 VDC
40A
30A
18A
15A
10A
8A
100mVp-p
100mVp-p
100mVp-p
100mVp-p
120mVp-p
150mVp-p
150mVp-p
200W
225W
216W
225W
240W
240W
240W
80%
82%
83%
84%
85%
86%
87%
85~132 / 170~264 VAC
(selectable by switch)
5A
MECHANICAL DRAWING
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/18/2019
Page 3 of 4
PSHF240W Series
Single Outputs
Up to 240 Watts
Rev. B
AC/DC Switching Power Supplies
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001: 2015
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working
closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to
provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss
your future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
Address:
sales@wallindustries.com
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
©2019 Wall Industries, Inc. Specifications subject to change without notice. Wall Industries is not responsible for typographical errors. The information contained herein is for
informational purposes only. This information is provided by Wall Industries and we make no representations or warranties of any kind, express or implied, about the completeness,
accuracy, reliability, suitability or availability with respect to the information contained in this document for any purpose. All product and manufacturer names are trademarks or
registered trademarks of their respective companies.
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/18/2019
Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明