PSLS05-15B12SS-F [WALL]
AC-DC REG PWR SUPPLY MODULE,;型号: | PSLS05-15B12SS-F |
厂家: | WALL INDUSTRIES,INC. |
描述: | AC-DC REG PWR SUPPLY MODULE, |
文件: | 总6页 (文件大小:972K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PSLS05 SERIES
Up to 5 Watts
AC/DC Converter
Single Output
Rev C
Standard Pins
90 Degree Bent Pins (-F Suffix)
FEATURES
• Wide Input Voltage Range:
85~264VAC/100~400VDC
• Ultra-Slim SIP Package with Optional
90º Bend
• Industrial Grade
• Isolation of 3000VAC
• Compact Size
• Over Voltage, Over Current and
Short Circuit Protection
• RoHS Compliant
• IEC60950, UL60950, and EN60950
Safety Approvals
DESCRIPTION
The PSLS05 series of AC/DC converters offers up to 5 watts of output power in
an ultra slim SIP package. This series consists of single output models with a
wide input voltage range of 85~264VAC/100~400VDC. Each model in this series
is industrial grade, has isolation of 3000VAC, and is RoHS compliant. This
series also has IEC60950, UL60905, and EN60950 safety approvals and is
RoHS compliant.
Size: 1.65in x 0.73in x 0.54in
Size: 1.65in x 0.79in x 0.55in
MODEL SELECTION TABLE
Model Number(1)
PSLS05-15B03SS
PSLS05-15B05SS
PSLS05-15B09SS
PSLS05-15B12SS
PSLS05-15B15SS
PSLS05-15B24SS
Input Voltage Range
Output Voltage
Output Current
1A
Maximum Capacitive Load
Efficiency
67%
Output Power
3.3W
3.3V
5V
2200µF
1500µF
680µF
470µF
330µF
100µF
1A
74%
9V
0.56A
0.42A
0.34A
0.21A
75%
85-264VAC
(100-400VDC)
12V
15V
24V
76%
5W
77%
79%
SPECIFICATIONS
All specifications are based on 25°C, Humidity <75%, Nominal Input Voltage, and Rated Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
Conventional
AC Input
DC Input
100
85
100
47
240
264
400
63
0.2
0.1
VAC
Input Voltage Range
VDC
Hz
Input Frequency
Input Current
115VAC
230VAC
A
115VAC
230VAC
5
10
Inrush Current
A
Leakage Current
CY0 is 1nF/400VAC
0.25
mA
OUTPUT SPECIFICATIONS
Output Voltage
See Table
3.3V Model
All Other Models
Full Load
±2
±1
±0.1
±1
±3
±2
±0.5
±1.5
Voltage Accuracy
%
Line Regulation
Load Regulation
%
%
10%-100% Load
Output Power
See Table
Output Current
Maximum Capacitive Load
Ripple & Noise
See Table
See Table
20MHz bandwidth (peak-peak value)
50
150
mV
%/ºC
W
Temperature Drift Coefficient
Stand-By Power Consumption
±0.02
0.5
Min Load
0
%
115VAC Input
230VAC Input
20
80
Hold Up Time
mS
PROTECTION
Short Circuit Protection
Over Current Protection
Over Voltage Protection
Continuous, Self-Recovery
≥110%Io, Self-Recovery
Zener Clamp Diode
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/31/2019
Page 1 of 6
PSLS05 SERIES
Up to 5 Watts
AC/DC Converter
Single Output
Rev C
SPECIFICATIONS
All specifications are based on 25°C, Humidity <75%, Nominal Input Voltage, and Rated Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
-25
-40
+85
+105
85
ºC
ºC
%RH
Storage Humidity
Wave-Soldering
Manual-Welding
-25ºC~0ºC
260±5ºC; time: 5~10s
360±10ºC; time:3~5s
Welding Temperature
Power Derating
0.8
1.33
%/ºC
+55ºC~+85ºC
MTBF
MIL-HDBK-217F @25ºC
300,000
Hours
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Isolation Voltage
PHYSICAL SPECIFICATIONS
Weight
230VAC, % typ.
See Table
100
kHz
VAC
Input to Output (Test Time: 1min (leakage current setting value: 5mA)
3000
0.25oz (7g)
1.65in x 0.73in x 0.54in
Standard Pins
-F Suffix
(42mm x 18.50mm x 13.65mm)
1.65in x 0.79in x 0.55in
(42mm x 20mm x 14mm)
Free Air Convection
Dimensions (L x W x H)
Cooling
SAFETY CHARACTERISTICS
IEC60950
EN60950
UL60950
Safety Approvals & Regulated
Certification
Certifications
Safety Class
Standard Pin Models Only
Class II
UL, CE, CB
CISPR22/EN55022(2)
Class A
Class B
Class B
CE
CISPR22/EN55022(3)
EMI
RE
IEC/EN61000-4-2
CISPR22/EN55022(2) (3)
ESD
RS
Contact ±4kV
Perf. Criteria B
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
Perf. Criteria A
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-5
IEC/EN61000-4-6
IEC/EN61000-4-8
10V/m
±2kV(2)
EFT
±4kV(3)
Line to Line ±1kV(2)
Surge
Line to Line ±1kV/line to ground ±2KV (3)
CS
PFM
3Vr.m.s.(3)
10A/m
Voltage Dips, Short Interruptions,
Voltage Variations Immunity
IEC/EN61000-4-11
0%-70%
Perf. Criteria B
NOTES
1. Add -F to model name to indicate 90º bent pin model.
2. See Fig. 1 for recommended circuit.
3. See Fig. 2 for recommended circuit
4. Module required dispensing fixed after assembled.
5. This part is open frame, at least 6.4mm safety distance between the primary and secondary external components of the module is needed to meet the
safety requirements.
6. Customization is available.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/31/2019
Page 2 of 6
PSLS05 SERIES
Up to 5 Watts
AC/DC Converter
Single Output
Rev C
CHARACTERISTIC CURVES
Temperature Derating Graph
Input Voltage Derating Graph
Note:
1. Input voltage should be derated based on temperature derating when it is 85~110VAC/240~264VAC/100-130VDC/340-400VDC
2. This product is suitable for use in natural cooling environments. If in closed environment, please contact factory.
PSLS05-15BXXSS AC Input
Efficiency Vs Input Voltage (Full Load)
PSLS05-15B12SS AC Input
Efficiency Vs Output Load
PSLS05-15BXXSS DC Input
Efficiency Vs Input Voltage (Full Load)
PSLS05-15B12SS DC Input
Efficiency Vs Output Load
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/31/2019
Page 3 of 6
PSLS05 SERIES
Up to 5 Watts
AC/DC Converter
Single Output
Rev C
MECHANICAL DRAWINGS
Pin Out
Function
Pin
1
3
5
7
AC(N)
AC(L)
+V(cap)
-V(cap)
-Vo
12
14
+Vo
1. It is necessary to add C1 between pin 5 and pin 7.
2. It is necessary to add circuit to the output, such as the typical
application of Fig. 1.
3. It is necessary to have distance ≥6.4mm for safety between
external components in primary circuit and secondary circuit.
90º Bent Pin Models (-F Suffix)
Note: Grid 2.54*2.54mm
Pin Out
Pin
1
3
5
7
Function
AC(N)
AC(L)
+V(cap)
-V(cap)
-Vo
12
14
+Vo
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/31/2019
Page 4 of 6
PSLS05 SERIES
Up to 5 Watts
AC/DC Converter
Single Output
Rev C
DESIGN REFERENCE
Typical Application Circuit
C1
C2
FUSE
(Required)
Model
R1
C3
CX1
CY0
NTC
MOV
TVS
(Required) (Required)
PSLS05-15B03SS
PSLS05-15B05SS
PSLS05-15B09SS
PSLS05-15B12SS
PSLS05-15B15SS
PSLS05-15B24SS
SMBJ7.0A
SMBJ12A
SMBJ20A
SMBJ30
220µF/35V
10µF/400V
12Ω/ 100nF/ 0.1µF/
2W 50V
1nF/
13D-5 S14K350
1A/250V
275VAC 400VAC
150µF
Note:
1. C1: When AC input, C1 is used as filter capacitor, the value of C1 is recommended to be 10µF/400V.
When DC input, C1 is used as EMC filter capacitor, the value of C1 is recommended to be 10µF/400C (when the input is above 370VDC, the
recommended value of C1 is 10µF/450V)
2. Output filtering capacitor C2 is electrolytic capacitor, C2 is recommended to apply electrolytic capacitor with high frequency and low resistance. For
capacitance and current of capacitor please refer to datasheet. Capacitance withstands voltage derating 80% or above. C3 is ceramic capacitor, which is
used to filter high-frequency noise.
EMC Solution-Recommended Circuit
Components
MOV2
CY1, CY2
CX
Recommend Parameters
S14K320
1nF/400VAC
0.1µF/275VAC
3.5mH
LCM
LDM
330µH
NTC
13D-5
FUSE
1A/250V, slow fusing, required
Note: Recommended value of other components refers to typical application circuit
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/31/2019
Page 5 of 6
PSLS05 SERIES
Up to 5 Watts
AC/DC Converter
Single Output
Rev C
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001: 2015
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
©2019 Wall Industries, Inc. Specifications subject to change without notice. Wall Industries is not responsible for typographical errors. The information contained herein is for
informational purposes only. This information is provided by Wall Industries and we make no representations or warranties of any kind, express or implied, about the completeness,
accuracy, reliability, suitability or availability with respect to the information contained in this document for any purpose. All product and manufacturer names are trademarks or
registered trademarks of their respective companies.
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/31/2019
Page 6 of 6
相关型号:
©2020 ICPDF网 联系我们和版权申明