PSRL0402MX-48 [WALL]
400 Watt with Airflow Single Output Medical Approved AC/DC Medical Power Supply with Active PFC; 400瓦气流与单路输出医疗核准AC / DC医疗电源采用主动PFC
| 型号： | PSRL0402MX-48 |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | 400 Watt with Airflow Single Output Medical Approved AC/DC Medical Power Supply with Active PFC |
| 文件： | 总4页 (文件大小：287K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PSRL0402M Series
400 Watt with Airflow
Single Output Medical Approved
AC/DC Medical Power Supply with Active PFC
FEATURES
● 2 Year Warranty
● Both Medical & ITE Safety Approvals
● Optional N+1 Forced Active Current Sharing
● Power Factor Corrected to EN61000-3-2 Class D
● Providing Peak Power 700W within 500uS Duty Duration
● U-Chassis & Enclosed with Built-in Fan Mechanical Options
● Current Monitoring and Remote Voltage Adjustment (Margin)
● 1U Height Size and High Power Density: 6.25 Watts/cu Inches
U Type: (U-Chassis): 8(L) x 5(W) x 1.6(H) inches.
E Type: (Enclosed with built-in fan): 9(L) x 5(W) x 1.6(H) inches.
SPECIFICATIONS: PSRL0402M Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
90 – 264VAC Full Range
Input Frequency
47 to 63Hz
Input Current
6.35A at 90VAC full load
Inrush Current
Leakage Current
Remote ON/OFF
35A max @ 230VAC with full load and cold start.
Medical degree 300µA; ITE degree 1.5mA.
Designated as RSW on the CN3, requires a low signal to inhibit output.
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Power Range
Output Adjustability
Total Regulation
400 Watts max with airflow. (See Notes 2 and 3)
Output user adjustable ±5% minimum.
±1%
See Table
Output Current
Ripple & Noise (peak to peak)
Transient Response
Hold-Up Time
±1%
Returns to within 1% in less than 2.5ms for a 50% load change and the peak transient does not excess 5%.
20ms min. at 80% of full load.
Turn-on/off not exceed 5% over nominal voltage.
Overshoot
Turn On Delay
1 second maximum at 120VAC.
Designated as RS+ and RS- on the CN3. (Not available for current sharing models).
Remote Sense
PROTECTION
Over Voltage Protection
Short Circuit Protection
Over-Temperature Protection
Over-Power Protection
Input Voltage Protection
Input Circuit Protection (Primary)
GENERAL SPECIFICATIONS
Switching Frequency
Efficiency
Latching down will occur when output voltage exceeds 130% and recycle AC input to reset.
Trip without damage and auto-recovery.
Protected in the event of excessive operating ambient 85°C and automatic recovery.
C.C. mode 110-140% and auto-recovery.
Power shut down under 80 ±5VAC, and recovered over 86VAC
Two T8A/250V fuses inserted.
30KHz fixed frequency
70% for 3.3V, 75% for 5V, 80% for 12V, and 83% minimum for other outputs @ 230VAC and full load.
1500 VAC input line to chassis (2mA DC cut off current); 4000VAC between primary and secondary windings.
Primary to core 1500VAC. All for 3 seconds.
Withstand Voltage
Burn In
PFC
45 ±5°C for one hour @ 230VAC with full load.
Active power factor correction meets EN61000-3-2 class D.
Designated as PG on the CN3 will go high 100-500ms after regulation and goes low 1ms before loss of
regulation.
Power Good
Power Supply On
Green LED designated as LED 1 on the PCB.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL0402M Series
400 Watt with Airflow
Single Output Medical Approved
AC/DC Medical Power Supply with Active PFC
SPECIFICATIONS (CONTINUED)
GENERAL SPECIFICATIONS (CONTINUED)
Grounding Test
Current Sharing
Current Monitor
Margin
Apply 40A from ground pin to the earthed connection point. Max allowable resistance is 0.1 ohm.
Designated as CSH on the CN3, optional single wired forced current sharing function and parallel up to 4
units within 10% accuracy at full load.
Designated as CMN on the CN3 for current sense for a 0.5V to 3VDC to represent 0% to 100% output current.
Designated as MAG on the CN3 providing 50% of output voltage remote adjustment by applying 0.4 ~ 5V
signal on MAG.
Designated as ACF on the CN3 to monitor the input voltage, when input goes under 80 ±5VAC the signal will
go low (0) and then go high (+5V) once reappears over 86VAC.
AC Fail (optional)
LED Display
Bi-color green LED in front panel (E Type only). Any protection occurred or RSW applied low signal will emit
orange.
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
0°C to +70°C ambient, de-rating at 2.5% per degree from 50°C to 70°C.
-20°C to +85°C
5% to 90% RH, non-condensing
Storage Humidity
5% to 95% RH, non-condensing
Vibration
Frequency 5 ~ 50Hz, acceleration ±7.35 m/(s x s) on X, Y, and Z axis.
U Type (U-Chassis): 400W max with 23CFM airflow or 250W max under convection cooling.
E Type (Enclosed with side built-in fan): 400W
Cooling
Fan Drive
MTBF
PHYSICAL SPECIFICATIONS
12VDC/400mA is available to drive an external fan.
100,000 hours (according to MIL-HBK-217F) at 30°C.
U Type (U-Chassis): 1.3Kg
Weight
E Type (Enclosed with side built-in fan): 1.6Kg
U Type (U-Chassis): 8(L) x 5(W) x 1.6(H) inches.
E Type (Enclosed with side built-in fan): 9(L) x 5(W) x 1.6(H) inches.
Dimensions
Warranty
SAFETY
Emissions
2 years
FCC part15, CISPR 22 Class B, Conducted.
Approved to UL60950-1/ 60601-1, CSA C22.2 No. 60950-1-03/ 601.1-M90, TUV EN60950-1/ 60601-1,
CE Mark (LVD) EN61204-3/ 60601-1-2/ 61000-3-2,3, and IEC61000-4 Series Regulations and CB.
Safety Regulations
OUTPUT VOLTAGE / CURRENT RATING CHART
Output Current
Output Voltage
Preset
Ripple &
Noise
Model
Regulation
Type U
Type U (with forced air)
Range
Voltage
(Convection)
45A
& Type E
PSRL0402Mx-03(I)
PSRL0402Mx-05(I)
PSRL0402Mx-12(I)
PSRL0402Mx-18(I)
PSRL0402Mx-24(I)
PSRL0402Mx-36(I)
PSRL0402Mx-48(I)
2 – 3.3 VDC
5 – 6 VDC
3.3 VDC
5 VDC
60A
60A
+/- 1%
+/- 1%
+/- 1%
+/- 1%
+/- 1%
+/- 1%
+/- 1%
+/- 1%
+/- 1%
+/- 1%
+/- 1%
+/- 1%
+/- 1%
+/- 1%
45A
12 – 15 VDC
16 – 21 VDC
22 – 30 VDC
31 – 41 VDC
42 – 58 VDC
12 VDC
18 VDC
24 VDC
36 VDC
48 VDC
20.84A
13.89A
10.42A
6.94A
33.33
22.22
16.67
11.11
8.33
5.21A
NOTES
1. PSRL0402M Series is designated as PSRL0402Mx-yz where x can be blank (U-chassis), C (U-chassis with top cover), or
E (Enclosed with side built-in fan), y can be 03, 05, 12, 18, 24, 36, or 48 for output voltage, z can be blank or I where I
denote forced current sharing option (OR-ring diode). See PSRL0402M-I Series for forced current sharing.
2. PSRL0402MU Series: 400W max. with 23CFM airflow or 250W max. under convection cooling; (Option: Top Cover)
3. PSRL0402ME Series: 400W max. with built-in fan flow.
4. All output ranges are covered in agency certification and the preset voltage will be set as standard models. If any request
is not standard output, please contact us prior to ordering.
5. Providing peak power to 700W within 500uS for all models, longer duty duration need contact manufacture.
6. 1% minimum load is required to maintain the ripple and regulation.
7. Output is fully isolated.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL0402M Series
400 Watt with Airflow
Single Output Medical Approved
AC/DC Medical Power Supply with Active PFC
MECHANICAL DRAWINGS
PSRL0402MU Series (U-Chassis Type): 8(L) x 5(W) x 1.6(H) inches; Weight: 1.3kg; Option: Top Cover.
PSRL0402ME Series (Enclosed with built-in Fan Type): 9(L) x 5(W) x 1.6(H) inches; Weight: 1.6kg.
Output Pin Connection
Howder
Pins 1 – 3
Pins 4 – 6
Molex
Pins 1 – 8
Pins 9 – 16
Vo+
Vo-
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL0402M Series
400 Watt with Airflow
Single Output Medical Approved
AC/DC Medical Power Supply with Active PFC
I/O CONNECTOR PIN ASSIGNMENT
Input Connector(CN1):
PSRL0402MU Series: mating Molex Part No. 09-91-0700 equivalent (7 pin, 5 used), or Howder Terminal block Part No. HD-121-3P.
PSRL0402ME Series: IEC320 or equivalent Snap-in mounting type or DINKLE Terminal block Part No. DT-35-A02W-03 (3 pin).
Output Connector (CN2):
Mating Molex 16 pins (09-91-1600), or Howder (HD-121-6P) M3.5, 8 pins terminal block, 9.5MM Center.
Output Pin Assignment:
(See table)
Logic signal connectors (CN3):
Mating JST XHP-9 or equivalent (CHYAO SHIUNN JS-2001-09) Mating Pins: JST SXH-002T-P0.6 for AWG 30 to 26.
Mounting Inserts:
6-32, M4 4 Places individually with maximum penetration 0.15 inches on bottom side and 0.25 inch on both sides
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
相关型号：
PSRL0402MX-48I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
PSRL0402X-03I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Switching Power Supply with Active PFC
WALL
PSRL0402X-05I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Switching Power Supply with Active PFC
WALL
PSRL0402X-12I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Switching Power Supply with Active PFC
WALL
PSRL0402X-18I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Switching Power Supply with Active PFC
WALL
PSRL0402X-24I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Switching Power Supply with Active PFC
WALL
PSRL0402X-36I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Switching Power Supply with Active PFC
WALL
PSRL0402X-48I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Switching Power Supply with Active PFC
WALL
©2020 ICPDF网 联系我们和版权申明