PSRL5017RE5-12 [WALL]
AC-DC Power Factor Correction Module,;
| 型号： | PSRL5017RE5-12 |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | AC-DC Power Factor Correction Module, |
| 文件： | 总4页 (文件大小：691K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PSRL5017R5 SERIES
Up to 500 Watts
Single Output with Active PFC
Rev C
AC/DC Switching Power Supply
Size: 9.2in x 4.3in x 2.5in
FEATURES
• Optional Top Cover Available
• Universal AC Input/Full Range
• Optional N+1 Active Current Sharing
• Peak Power 900W within 500µS duty duration
• Power Factor Corrected to EN61000-3-2 Class D
• High Power Density (Max. 9.1 Watts per cubic inch)
• Approved to UL/CUL/TUV/CB/CE & Class B Emissions
• Enclosed with Built-in Fan Mechanical Options
DESCRIPTION
The PSRL5017R5 series of AC DC power supplies provides up to 500W of output power. All models have a single output and a universal input.
Models are available as enclosed with built-in Fan (Type E). Output connectors are Howder terminal block design. Optional Mating Molex outputs
are also available. Please contact factory for ordering details.
MODEL SELECTION TABLE
Model Number
Output Voltage Range
Output Current
Ripple & Noise
Preset Voltage
Output Power
Regulation
PSRL5017Rx5-03(I)
PSRL5017Rx5-05(I)
PSRL5017Rx5-12(I)
PSRL5017Rx5-16(I)
PSRL5017Rx5-24(I)
PSRL5017Rx5-36(I)
PSRL5017Rx5-48(I)
2-3.3VDC
5-6VDC
80A
75mV
75mV
±1%
±1%
±1%
±1%
±1%
3.3VDC
5VDC
264W
400W
500W
500W
500W
500W
500W
±1%
±1%
±1%
±1%
±1%
±1%
±1%
80A
12-15VDC
16-21VDC
22-30VDC
31-47VDC
48-56VDC
41.67A
31.25A
22.73A
16.13A
10.42A
12VDC
18VDC
24VDC
36VDC
48VDC
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/23/2019
Page 1 of 4
PSRL5017R5 SERIES
Up to 500 Watts
Single Output with Active PFC
Rev C
AC/DC Switching Power Supply
SPECIFICATIONS: PSRL5017R5
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
Full Range (PSRL5017Rx8 800W Series: 180-264VAC only)
90
47
264
63
VAC
Hz
Inrush Current
@230VAC with Full Load Cold Start
@240VAC
70
A
Leakage Current
3.5
mA
A
Input Current
@90VAC and Full Load
8
Remote ON/OFF
Designated as RSW on CN3, requires a low signal to inhibit output
OUTPUT SPECIFICATIONS
Output Voltage
Output Power Range
Output Adjustability
Total Regulation
See Table
500
With Airflow.
Output user adjustable
W
%
%
±5
20
±1
Output Current
Ripple and Noise (peak to peak)
See Table
See Table
Returns to within 1% in less than 2.5ms for a 50% load change and
the peak transient does not excess 5%
@80% of Full Load.
Turn-On & Off overshoot <5% over normal voltage
@120VAC
Transient Response
Hold-Up Time
Overshoot
Turn On Delay
ms
1
Sec.
Designated as RS+ and RS- on CN3. Voltage compensates for up
to 0.5V line drop. (Not available for current sharing models)
Remote Sense
PROTECTION
Short Circuit Protection
Trip without damage and auto-recovery.
Unit protected of excessive operating ambient 85°C and automatic
recovery.
Unit latching down when output voltage exceeds 130% and recycle
AC input to reset.
Over-Temperature Protection
Over Voltage Protection
Over-Power Protection
Input Voltage Protection
Input Fusing Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Fold back mode 110-140% and auto-recovery.
Power shut down under 80 ±5VAC, and recovered over 86VAC
A T10A/250V fuse inserted in primary
Ambient, De-Rating at 2.5% per degree from 50°C to 70°C
0
-20
5
5
5
+70
85
90
95
50
°C
°C
% RH
% RH
Hz
Non-Condensing
Non-Condensing
Acceleration 7.35 m/(s x s) on X,Y, and Z axis
Self-cooled by built-in fan.
Vibration
Cooling
MTBF
(according to MIL-HBK-217F) @30°C
150,000
Hr
GENERAL SPECIFICATIONS
3.3V
70
75
80
5V
@230VAC and Full Load
12V
Efficiency
%
All other Outputs
1500 VAC input line to chassis (10mA DC cut off current); 3000VAC
between primary and secondary windings. Primary to core
1500VAC. All for 3 seconds.
83
Withstand Voltage
Burn-In
PFC
For one hour @ 230VAC with Full Load
40
45
50
°C
Active power factor correction meets EN61000-3-2 Class D
Designated as PG on the CN3 and TTL high 100-500ms after
regulation. It goes low at least 1ms before loss of regulation for
Power on Reset signal.
Power Good
Apply 25A from ground pin of the three prong plug to the far most
earth. Max allowable resistance is 0.1 ohm.
Designated as CSH on the CN3, optional single wired for forced
current sharing function and parallel up to 4 units within 10%
accuracy at full load.
Grounding Test
Current Sharing
Designated as CMN on the CN3 is a 0.5V to 3VDC output voltage to
represent 0% to 100% output current.
Bi-Color LED1 emit Green for Power On and emit Orange when
protection is enabled or RSW is applied to a low signal
Current Monitor
LED Display
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/23/2019
Page 2 of 4
PSRL5017R5 SERIES
Up to 500 Watts
Single Output with Active PFC
Rev C
AC/DC Switching Power Supply
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
PHYSICAL SPECIFICATIONS
Weight
1450 grams
9.2in x 4.3in 2.5in
Dimensions (L x W x H)
SAFETY & EMC CHARACTERISTICS
UL60950-1(7)
CSA C22.2 No. 60950-1-03
TUV EN60950-1
CE Mark (LVD) EN61000-3-2-3
IEC61000-4 Series Regulations and CB
Safety Regulations
Emissions
FCC part15, CISPR 22 Class B, Conducted
NOTES
(1) The PSRL5017R5 Series is designated as PSRL5017Rxw-yz where x=E (Enclosed with built-in fan type), w=5 for output power from 264W-
500W, y= 03,05,12,16,36, or 48 for output voltage, and z can be blank or I where I denotes forced current sharing option (output with internal OR-
ring diode). See PSRL5017-I Series for forced current sharing.
(2) All output ranges are covered in agency certifications and preset voltage will be set as standard models. If any request is not preset output, then
please contact us in advance.
(3) Ripple & Noise are measured from 10KHZ to 20 MHz bandwidth at output with parallel 0.1µF ceramic and 22µF electrolytic capacitors.
(4) Providing peak power to 900W within 500µS for all models, longer duty duration need contact with manufacturer.
(5) 1% minimum load is required to maintain the ripple and regulation.
(6) Output is fully isolated.
(7) This product is Listed to applicable standards and requirements by UL.
*Due to advances in technology, specifications subject to change without notice.
MECHANICAL DRAWINGS
Enclosed with Built-In Fan Type
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/23/2019
Page 3 of 4
PSRL5017R5 SERIES
Up to 500 Watts
Single Output with Active PFC
Rev C
AC/DC Switching Power Supply
I/O Connector Pin Assignment
AC Input Connector (CN1):
IEC320 or equivalent Snap-in mounting type or DINKLE Terminal Block Part No. DT-35-A02W-03 (3 pin)
Output Connector (CN2):
Mating Molex Part No. 09-91-2000 (20 Pin) or Howder Terminal Bloack Part No. HD-121-8P (8 pin)
Output Pin Assignment:
Output Pin Connetion
Howder
Pins 1-4
Pins 5-8
Molex
Pins 1-10
Pins 11-20
Vo+
Vo-
Logic Signal Connectors (CN3):
Mating JST XHP-7 or equivalent (CHYAO SHIUNN JS-2001-07).
Fan Drive:
12VDC/500mA Mating JST XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02
Mounting Inserts:
6-32, M4 4 Places individually with maximum penetration 0.2 inch on bottom side and 0.25 inch on both sides.
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001: 2015
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
©2019 Wall Industries, Inc. Specifications subject to change without notice. Wall Industries is not responsible for typographical errors. The information contained herein is for
informational purposes only. This information is provided by Wall Industries and we make no representations or warranties of any kind, express or implied, about the completeness,
accuracy, reliability, suitability or availability with respect to the information contained in this document for any purpose. All product and manufacturer names are trademarks or
registered trademarks of their respective companies.
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/23/2019
Page 4 of 4
相关型号：
PSRL5017RU3-03I
Up to 300 Watts Single Output with Active PFC Forced Current Sharing Series AC/DC Switching Power Supply
WALL
PSRL5017RU3-05I
Up to 300 Watts Single Output with Active PFC Forced Current Sharing Series AC/DC Switching Power Supply
WALL
PSRL5017RU3-12I
Up to 300 Watts Single Output with Active PFC Forced Current Sharing Series AC/DC Switching Power Supply
WALL
PSRL5017RU3-16I
Up to 300 Watts Single Output with Active PFC Forced Current Sharing Series AC/DC Switching Power Supply
WALL
PSRL5017RU3-24I
Up to 300 Watts Single Output with Active PFC Forced Current Sharing Series AC/DC Switching Power Supply
WALL
©2020 ICPDF网 联系我们和版权申明