PSS100 [WALL]
100 Watt Single Output AC/DC Power Supply; 100瓦单输出AC / DC电源供应器
| 型号： | PSS100 |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | 100 Watt Single Output AC/DC Power Supply |
| 文件： | 总3页 (文件大小：152K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PSS100 Series
100 Watt
Single Output
AC/DC Power Supply
FEATURES
● 1 Year Warranty
● Low Cost, High Reliability
● Fixed Switching Frequency
● Compact Size, Light Weight
● AC Input Selectable by Switch
● 100% Full Load Burn-In Tested
● Cooling by Free Air Convection
● EN55022, IEC801-2,3,4 and IEC555-2
● UL1950 and TUV EN60950 Approved
● Short Circuit and Overload Protected
● Built-In EMI Filter, Low Ripple and Noise
● High Efficiency, Low Working Temperature
● Soft Start Circuit, Limiting AC Surge Current
SPECIFICATIONS: PSS100 Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
85 ~ 132VAC / 180 ~ 264VAC selected by switch (255 ~ 370VDC)
47 to 63Hz
AC Current
2.4A @ 115VAC
Cold Start 30A @ 115VAC
< 1mA @ 240VAC
1.2A @ 230VAC
60A @ 230VAC
Inrush Current (max)
Leakage Current
OUTPUT SPECIFICATIONS
Output Voltage
See Table
See Table
Output Power
Voltage Tolerance (See Note 3)
Voltage Adjustment Range
Line Regulation
PSS-100-3 & PSS-100-5: ±2.0%; Other Models: ±1.0%
See Table
See Table
Load Regulation
Output Current
See Table
See Table
Ripple & Noise (max) (See Note 2)
Setup, Rise Time
100mVp-p
200ms, 80ms @ full load
20ms @ full load
±0.03%/°C (0 ~ 50°C)
Hold Up Time (typical)
Temperature Coefficient
PROTECTION
105 ~ 150% rated output power (150 ~ 200% rated output power for S-100-7.5 only)
Protection Type: Shutdown output voltage, re-power on to recover.
Overload Protection
GENERAL SPECIFICATIONS
Switching Frequency
Efficiency
25KHz
See Table
Withstand Voltage
Isolation Resistance
ENVIRONMENTAL SPECIFICATIONS
Working Temperature
Storage Temperature
Working Humidity
Storage Humidity
Cooling
1500VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG)
100MΩ/500DC (Input to Output, Input to FG, and Output to FG)
-10°C to +60°C (refer to output load derating curve)
-20°C to +85°C
20 ~ 90% RH non-condensing
10 ~ 95% RH
Free air convection
Vibration
MTBF
10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes.
322,400 hours min. @ 25°C (MIL-HDBK-217F)
PHYSICAL SPECIFICATIONS
Weight
620 grams
199(L) x 98(W) x 38(H) mm
1 year
Dimensions
Warranty
SAFETY & EMC
Safety Standards
EMI Conduction & Radiation
Design refer to UL1012
Design refer to FCC Part15 J Conduction Class B
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSS100 Series
100 Watt
Single Output
AC/DC Power Supply
OUTPUT VOLTAGE / CURRENT RATING CHART
Model
Output
Voltage
Output
Current
Line
Load
Output
Input Voltage
Efficiency
Power
Number
Voltage
Adjust. Range
Regulation Regulation
PSS-100-3
PSS-100-5
PSS-100-7.5
PSS-100-10
PSS-100-12
PSS-100-15
PSS-100-18
PSS-100-24
PSS-100-27
PSS-100-48
3VDC
5 VDC
2.85 ~ 3.3V
4.75 ~ 5.5V
6.75 ~ 8.25V
9 ~ 11V
20A
20A
±0.5%
±0.5%
±0.5%
±0.3%
±0.3%
±0.3%
±0.3%
±0.2%
±0.2%
±0.2%
±0.5%
±0.5%
±0.5%
±0.3%
±0.3%
±0.3%
±0.3%
±0.2%
±0.2%
±0.2%
60W
100W
102W
100W
102W
100.5W
100.8W
108W
99.9W
96W
70%
78%
80%
80%
81%
81%
82%
84%
84%
84%
7.5 VDC
10VDC
12 VDC
15 VDC
18VDC
24 VDC
27VDC
48 VDC
13.6A
10A
85 ~ 132 VAC
or
180 ~ 264 VAC
10.8 ~ 13.2V
13.5 ~ 16.5V
16.2 ~ 19.8V
21.6 ~ 26.4V
26 ~ 32V
8.5A
6.7A
5.6A
4.5A
3.7A
2A
43.2 ~ 52.8V
NOTES
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C ambient temperature.
2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF& 47uF parallel capacitor.
3. Tolerances include set up tolerance, line regulation, and load regulation.
DERATING CURVE
STATIC CHARACTERISTICS (24V)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSS100 Series
100 Watt
Single Output
AC/DC Power Supply
MECHANICAL DRAWING
Unit: mm
Terminal Pin No. Assignment
Pin No.
Assignment
1
2
AC/L
AC/N
3
FG
4,5
6,7
DC OUTPUT (-V)
DC OUTPUT (+V)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
相关型号：
©2020 ICPDF网 联系我们和版权申明