PSSNP-F60012-MD1 [WALL]
AC-DC Power Factor Correction Module,;型号: | PSSNP-F60012-MD1 |
厂家: | WALL INDUSTRIES,INC. |
描述: | AC-DC Power Factor Correction Module, |
文件: | 总5页 (文件大小:641K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PSSNP-F600 SERIES
600 Watts
Rev B
AC/DC Supply
Single Output
FEATURES
• Universal AC Input of 90~264VAC
• Over Load, Over Voltage, and Short Circuit Protection
• Vertical or Horizontal Assembly Available • Peak Load up to 1000W for 8 Sec.
• Medical Version Available
• Built-In Active PFC
• DIN Rail Assembly Available
• For ITE, Medical, and Industrial Applications
DESCRIPTION
The PSSNP-F600 series of AC/DC power supplies offers rated output power of 600 watts and a
peak output power of 1000 watts. This series consists of single output models with a universal input
range of 90~264VAC and high efficiency. Several options are available for this series including:
vertical or horizontal assembly, DIN rail assembly, and a medical version. Each model in this series
has active PFC and is protected against over load, over voltage, and short circuit conditions. This
series can be used in ITE, medical, and industrial applications and has UL/EN/CSA 60950-1 and
UL/EN/CSA 60601-1 safety approvals. Please contact factory for ordering information.
Size: 10.83in x 5in x 29.69in
(275mm x 127mm x 75mm)
MODEL SELECTION TABLE
Output Current
Min Load Rated Load Peak Load
Output Power
Rated
Input Voltage
Output
Voltage
12V
24V
36V
Model Number(1)
Ripple & Noise(2) Typical Efficiency
Range
Peak(3)
PSSNP-F60012
PSSNP-F60024
PSSNP-F60036
PSSNP-F60048
0.2A
0.2A
0.2A
0.2A
45.8A
25A
16.67A
12.5A
83.5A
42A
27.8A
20.8A
120mVp-p
240mVp-p
260mVp-p
480mVp-p
86%
88%
90%
90%
90~264VAC
600W
1000W
48V
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
TEST CONDITIONS
Min
Typ
Max
Unit
90
47
264
63
20
VAC
Hz
A
Inrush Current
@Nominal
Power Factor
0.93
OUTPUT SPECIFICATIONS
Output Voltage
See Table
12V Model
24V Model
36V Model
48V Model
11.9
23.9
35.6
47.8
12.1
24.1
36.4
48.2
Voltage Accuracy(4)
V
Line Regulation(5)
±1
±1
%
%
Load Regulation(6)
Output Power
See Table
Output Current
See Table
See Table
16
Ripple & Noise (20MHz bandwidth)
Hold Up Time(7)
@Rated Load and 115VAC
ms
PROTECTION
Short Circuit Protection
Over Load Protection
Over Voltage Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Cooling
Automatic Recovery
Automatic Recovery
Latch Off
0
-20
50
+85
Convection
ºC
ºC
\
GENERAL SPECIFICATIONS
Efficiency
PHYSICAL SPECIFICATIONS
Weight
Dimensions (L x W x H)
Connectors
@Rated load and nominal line
AC Input & DC Output
See Table
Approx. 5.07lbs (2300g)
10.83in x 5in x 29.69in (275mm x 127mm x 75mm)
Terminal Blocks
SAFETY CHARACTERISTICS
Safety Approvals(8)
EMI
UL/EN/CSA 60950-1, UL/EN/CSA 60601-1
FCC “B”, EN55022 “B”
EN61000-3-2
Harmonics
Class D
EMS
EN61000-4-2, -3, -4, -5, -6, -11
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/25/2019
Page 1 of 5
PSSNP-F600 SERIES
600 Watts
Rev B
AC/DC Supply
Single Output
NOTES
1. Several assembly options are available for this series:
For Vertical Assembly with bracket and AC input on lower side, add -A1 to the end of model number. Ex: PSSNP-F6007-A1
For Vertical Assembly with bracket and AC input on upper side, add -A2 to the end of the model number. Ex. PSSNP-F6007-A2
For Horizontal Assembly without bracket, add -B to end of the model number. Ex. PSSNP-F6007-B
For DIN Rail Assembly with AC input at lower side, add -D to end of model number. Ex. PSSNP-F6007-D
For DIN Rail Assembly with AC input at upper side, add -D1 to end of the model number. Ex. PSSNP-F6007-D1.
This series is available as a medical grade product. To indicate medical grade, add -M to end of product model before any other suffixes. Ex:
PSSNP-F6007-MA2 would indicate a medical grade model with vertical assembly with bracket and AC input on the upper side.
2. Ripple & Noise is measured by using 15MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and
nominal line.
3. At peak load, the output can last for 8 seconds without shutdown.
4. At factory, in 60% rated load condition, the output is checked to be within voltage accuracy.
5. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.
6. Load regulation is defined by changing ±40% of measured output load from 60% rated load at another output set to 60% rated load.
7. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated
load and nominal line.
8. This product is Listed to applicable standards and requirements by UL.
*Due to advances in technology, specifications subject to change without notice.
PERFORMANCE CURVES
Switching Frequency Ripple
Line Frequency Ripple
Output Turn On Wave Form
Output Turn Off Wave Form
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/25/2019
Page 2 of 5
PSSNP-F600 SERIES
600 Watts
Rev B
AC/DC Supply
Single Output
Hold-Up Time
Over Voltage Protection
FCC B
EN 55022 B
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/25/2019
Page 3 of 5
PSSNP-F600 SERIES
600 Watts
Rev B
AC/DC Supply
Single Output
MECHANICAL DRAWINGS
Accessories
For Vertical Assembly:
Bracket x 2pcs & M4 screws x 4
For 35mm Carrier Rail Application
Rail Hook x 2 & #6-32 screw x 6 (Optional)
Packing:
Net Weight: Approx. 2300g/unit
Gross Weight: Approx. 14kg/carton, 5 units/carton
Carton size: 558mm x 356mm x 233mm
INSTALLATION INSTRUCTIONS
Installation -A1
Installation -A2
Installation -B
AC Input at lower side
AC Input at upper side
Vertical assembly with bracket
Vertical assembly with bracket
Horizontal assembly without bracket
Installation -D
Installation -D1
AC Input at lower side
Din Rail hook assembly
AC input at upper side
Din rail hook assembly
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/25/2019
Page 4 of 5
PSSNP-F600 SERIES
600 Watts
Rev B
AC/DC Supply
Single Output
MODEL NUMBER SETUP
PSSNP -
F600
12
-
M
A2
Series Name
Output Power
Output Voltage
Medical Grade
Assembly Options
F600: 600 Watts 12: 12VDC
24: 24VDC
Blank: Standard
M: Medical Grade
A1: AC Input @ Low Side, Vertical Assembly w/ bracket
A2: AC Input @ Upper Side, Vertical Assembly w/ bracket
B: Horizontal Assembly without bracket
36: 36VDC
48: 48VDC
D: AC Input @ Low Side, DIN rail hook assembly
D1: AC Input at Upper Side, DIN rail hook assembly
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001: 2015
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
©2019 Wall Industries, Inc. Specifications subject to change without notice. Wall Industries is not responsible for typographical errors. The information contained herein is for
informational purposes only. This information is provided by Wall Industries and we make no representations or warranties of any kind, express or implied, about the completeness,
accuracy, reliability, suitability or availability with respect to the information contained in this document for any purpose. All product and manufacturer names are trademarks or
registered trademarks of their respective companies.
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/25/2019
Page 5 of 5
相关型号:
©2020 ICPDF网 联系我们和版权申明