RBA30-24S15CH [WALL]
Ultra Wide 4:1 Input Voltage Range;
| 型号： | RBA30-24S15CH |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | Ultra Wide 4:1 Input Voltage Range |
| 文件： | 总10页 (文件大小：1518K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RBA30 SERIES
30 Watts
DC/DC Converter
Single & Dual Output
Rev A
Through Hole Package
Chassis Mount
DIN Rail Mount
Size: 2 x 1 x 0.47in (50.80 x 25.4 x 11.80mm)
Through Hole with Heatsink Package
Size: 2.99 x 1.24 x 0.84in (76 x 31.5 x 21.2mm)
Chassis Mount with Heatsink
Size: 2.99 x 1.24 x 1.02in (76 x 31.5 x 25.8mm)
DIN Rail Mount with Heatsink
Size: 2 x 1 x 0.64in (50.80 x 25.4 x 16.3mm)
Size: 2.99 x 1.24 x 0.99in (76 x 31.5 x 25.1mm)
Size: 2.99 x 1.24 x 1.17in (76 x 31.5 x 29.7mm)
OPTIONS
FEATURES
• Ultra Wide 4:1 Input Voltage Range
• Isolated & Regulated Single & Dual Output
• High Efficiency
• Through Hole, Chassis Mount, or DIN Rail
Package
• Package Type
-Through Hole
-Chassis Mount
-DIN Rail
• RoHS Compliant
• Input Under Voltage Protection
• Over Voltage, Over Current, and Short Circuit Protection
• Reverse Voltage Protection Available for Chassis Mount
and DIN Rail Models
• Heatsink
• Optional Heatsink Available
• Isolation Voltage of 1500VDC
• Six-Sided Shielded Metal Packaging
• Meets CISPR22/EN55022 Class A Without External
Components
• IEC60950, UL60950, and EN60950 Safety Approvals
APPLICATIONS
DESCRIPTION
• Industrial Robotics
The RBA30 series of DC/DC converters offers up to 30 watts of output power in either a through hole package,
chassis mounted package, or DIN rail mounted package. This series consists of single and dual output models
with an ultra-wide 4:1 input voltage range. Features of this series include high efficiency, six-sided shielding,
optional heatsink, and input under voltage protection as well as over voltage, over current, and short circuit
protection. This series meets CISPR22/EN55022 Class A without external components, is RoHS compliant, and
has IEC60950, UL60905, and EN60950 safety approvals. Please contact factory for ordering information.
MODEL SELECTION TABLE
Single Output Models
Output Current
Min Load Max Load Min. Typ.
Efficiency(3)
Maximum
Ripple &
Noise
Output
Power
Model Number(1) Input Voltage Range(2) Output Voltage
Certification
UL/CE/CB
Capacitive Load(4)
RBA30-24S03
RBA30-24S05
RBA30-24S09
RBA30-24S12
RBA30-24S15
RBA30-24S24
RBA30-48S03
RBA30-48S05
RBA30-48S12
RBA30-48S15
RBA30-48S24
3.3VDC
5VDC
9VDC
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
6000mA 83% 85%
6000mA 86% 88%
3333mA 86% 88%
2500mA 88% 90%
2000mA 88% 90%
1250mA 88% 90%
6000mA 84% 86%
6000mA 86% 88%
2500mA 86% 88%
2500mA 87% 89%
1250mA 87% 89%
10000µF
10000µF
4700µF
2700µF
1680µF
680µF
10000µF
10000µF
2700µF
1680µF
680µF
24VDC
(9~36VDC)
50mVp-p
50mVp-p
30W
30W
12VDC
15VDC
24VDC
3.3VDC
5VDC
12VDC
15VDC
24VDC
48VDC
(18~75VDC)
UL/CE/CB
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/21/2017
Page 1 of 10
website: www.wallindustries.com • e-mail: sales@wallindustries.com
RBA30 SERIES
30 Watts
DC/DC Converter
Single & Dual Output
Rev A
MODEL SELECTION TABLE
Dual Output Models
Output Current
Min Load Max Load Min. Typ.
Efficiency(3)
Maximum
Capacitive Load(4)
2000µF
Ripple &
Noise
Output
Model Number(1) Input Voltage Range(2) Output Voltage
Certification
Power
RBA30-24D05
RBA30-24D12
RBA30-24D15
RBA30-24D24
RBA30-48D05
RBA30-48D12
RBA30-48D15
±5VDC
±12VDC
±15VDC
±24VDC
±5VDC
0mA
0mA
0mA
0mA
0mA
0mA
0mA
±3000mA 84% 86%
±1250mA 87% 89%
±1000mA 87% 89%
±625mA 87% 89%
±3000mA 84% 86%
±1250mA 86% 88%
±1000mA 86% 88%
24VDC
(9~36VDC)
1250µF
680µF
470µF
2000µF
1250µF
680µF
50mVp-p
50mVp-p
30W
30W
CE
CE
48VDC
(18~75VDC)
±12VDC
±15VDC
SPECIFICATIONS
All specifications are based on 25°C, humidity <75%RH, Nominal Input Voltage, and Rated Output Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
24VDC Nominal Input
48VDC Nominal Input
24VDC Nominal Input
48VDC Nomianl Input
9
18
24
48
36
75
40
Input Voltage Range
VDC
VDC
Absolute Maximum Input(5)
80
3.3VDC Output Models
5VDC Output Models
Other Models
3.3VDC Output Models
5VDC Output Models
Other Models
3.3VDC Output Models
5VDC Output Models
Other Models
970
1420
1388
474
710
702
60
993
1453
1488
485
726
744
100
100
12
24VDC Nominal Input
48VDC Nominal Input
24VDC Nominal Input
48VDC Nominal Input
Full Load Input Current
No Load Input Current
mA
mA
60
6
3.3VDC Output Models
5VDC
20
20
30
35
Other Models
5
10
Reflected Ripple Current
Nominal Input Voltage
24VDC Nominal Input
48VDC Nominal Input
24VDC Nominal Input
48VDC Nominal Input
24VDC Nominal Input
48VDC Nominal Input
40
mA
-0.7
-0.7
50
100
9
Input Surge Voltage (1sec. max.)
VDC
Starting Voltage
VDC
VDC
18
5.5
12.0
6.5
15.5
Shutdown Voltage
Input Filter
Pi Filter
Module Switch On, Ctrl suspended or connected to TTL high level
Module Switch Off, Ctrl pin connected to GND or low level
Input Current when Switched Off
3.5
0
12
1.2
8
VDC
VDC
mA
Ctrl(6)
5
OUTPUT SPECIFICATIONS
Output Voltage
See Table
±1
±1
5%-100% Load
0%-5% Load
Full Load, input voltage from Positive Output
low voltage to high voltage
±3
±5
Voltage Accuracy
Line Regulation
Load Regulation(7)
Cross Regulation
%
%
%
±0.2
±0.5
±0.5
±0.5
±0.5.
±1
Negative Output
Positive Output
Negative Output
±1
5%-100% Load
±1.5
Dual Output, Main Output 50% load
Supplement output from 10% to 100% load
±5
%
Trim
±10
%Vo
Output Power
Output Current
Maximum Capacitive Load
See Table
See Table
See Table
Single Outputs
Dual Outputs
25% load step change, nominal input voltage
50
100
150
500
±8
Nominal Input Voltage, 100%
Load
Ripple & Noise (20MHz bandwidth)(8)
mVp-p
µs
50
300
±5
Transient Recovery Time
3.3VDC, 5VDC, & ±5VDC Outputs
Others
25% load step change,
nominal input voltage
Transient Response Deviation
%
±3
±5
Starting Time
Temperature Coefficient
Nominal Input Voltage & Constant Resistance Load
Full Load
10
ms
%/ºC
±0.03
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/21/2017
Page 2 of 10
website: www.wallindustries.com • e-mail: sales@wallindustries.com
RBA30 SERIES
30 Watts
DC/DC Converter
Single & Dual Output
Rev A
SPECIFICATIONS
All specifications are based on 25°C, humidity <75%RH, Nominal Input Voltage, and Rated Output Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
PROTECTION
Short Circuit Protection
Over Current Protection
Over Voltage Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Storage Humidity
Input Voltage Range
Input Voltage Range
Input Voltage Range
Hiccup, Continuous, Self-Recovery
110
110
190
160
%Io
%Vo
-40
-55
5
+80
+125
95
ºC
ºC
%RH
ºC
Non-Condensing
Pin Welding Resistance Temperature Welding spot is 1.5mm away from the casing, 10 seconds
Vibration
+300
10-55Hz, 10G, 30 Min. along X, Y, and Z
MTBF (MIL-HDBK-217F)
GENERAL SPECIFICATIONS
Efficiency
25ºC, Full Load (Ground, Benign, Controlled Environment
1000
kHours
@Full Load
PWM mode
See Table
300
Switching Frequency(9)
Insulation Voltage
KHz
VDC
Input-Output, with test time of 1 minute & leak current <1mA
Input-Output, Insulation voltage 500VDC/60sec., Ta=25ºC,
humidity=75%RH
1500
1000
Insulation Resistance
MΩ
Isolation Capacitance
PHYSICAL SPECIFICATIONS
Input-Output, 100KHz/0.1V
2000
0.92oz (26g)
pF
Through Hole Package
Without Heatsink
With Heatsink
Chassis Mount
1.69oz (48g)
2.40oz (68g)
1.20oz (34g)
1.98oz (56g)
2.68oz (76g)
2in x 1in x 0.47in
DIN Rail Mount
Through Hole Package
Chassis Mount
Weight
DIN Rail Mount
Through Hole Package
Chassis Mount
(50.80mm x 25.4mm x 11.80mm)
2.99in x 1.24in x 0.84in
(76mm x 31.5mm x 21.2mm)
2.99in x 1.24in x 1.02in
(76mm x 31.5mm x 25.8mm)
2in x 1in x 0.64in
(50.80mm x 25.4mm x 16.3mm)
2.99in x 1.24in x 0.99in
(76mm x 31.5mm x 25.1mm)
2.99in x 1.24in x 1.17in
(76mm x 31.5mm x 29.7mm)
Free Air Convection
Without Heatsink
With Heatsink
DIN Rail Mount
Dimensions (L x W x H)
Through Hole Package
Chassis Mount
DIN Rail Mount
Cooling Method
Shielding
Six-Sided
SAFETY CHARACTERISTICS
Safety Approvals
IEC60950, UL60950, & EN60950
CISPR22/EN55022
Single Output
Dual Output
Single Output
Dual Output
Class A (Bare Component)/Class B(10)
Class A (Bare Component)/Class B(10)
Class A (Bare Component)/Class B(10)
Class A (Bare Component)/Class B(10)
Perf. Criteria B
CE
RE
CISPR22/EN55022
CISPR22/EN55022
CISPR22/EN55022
EMI
ESD IEC/EN61000-4-2 Contact ±4kV
RS IEC/EN61000-4-3 10V/m
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
Perf. Criteria A
Single Output
Dual Output
Single Output
Dual Output
Single Output
Dual Output
±2kV(10)
EFT IEC/EN61000-4-4
Surge IEC/EN61000-4-5
±2kV(10)
EMS
Line to Line ±2kV(10)
Line to Line ±2kV(10)
3Vr.m.s
CS
IEC/EN61000-4-6
10Vr.m.s
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/21/2017
Page 3 of 10
website: www.wallindustries.com • e-mail: sales@wallindustries.com
RBA30 SERIES
30 Watts
DC/DC Converter
Single & Dual Output
Rev A
NOTES
1. Chassis Mount, DIN Rail Mount, and Heatsink are available options for this series. To indicate chassis mount, add “C” to model number. To
indicate DIN Rail Mount, add “DN” to model number. To indicate Heatsink, add “H” to model number.
2. Due to input reverse polarity protection function, chassis mount & DIN rail mount models minimum value input voltage range and starting voltage
is higher than 1VDC DIP package.
3. Efficiency is measured in nominal input voltage and rated output load. Due to input reverse polarity protection, minimum efficiency of chassis
mount and DIN rail mount models greater than min. -2 is qualified.
4. The capacitive loads of positive and negative outputs are identical. Maximum capacitive load offered were tested at input voltage range and full
load.
5. This is the absolute maximum rating the converter can operate at without damage, but it isn’t recommended.
6. The voltage of Ctrl pin is relative to input pin GND.
7. When testing from 0%-100% load working conditions, load regulation index of ±5%.
8. Ripple & Noise are measured by “parallel cable” method. See application notes for specific operation.
9. This series of products using reduced frequency technology, the switching frequency is test value of full load. When the load is reduced to below
50%, the switching frequency decreases with decreasing load.
10. See EMC solution-recommended circuit for recommended circuit.
11. Customization is available.
*Due to advances in technology, specifications subject to change without notice.
DERATING CURVES
Temperature Derating Curve (Single Output Models)
Temperature Derating Curve (Single Output Models)
Models: RBA30-24S09(H), RBA30-24S12(H), RBA30-24S15(H), RBA30-
48S12(H), RBA30-48S12(H), RBA30-48S15(H), RBA30-48S24(H)
Models: RBA30-24S03(H), RBA30-24S05(H), RBA48S03(H),
RBA30-48S05(H)
Temperature Derating Curve (Dual Output Models)
Temperature Derating Curve (Dual Output Models)
Models: RBA30-24D05(H) (18~36VDC Input Voltage), RBA30-24D24(H)
(18~36VDC Input Voltage), RBA30-48D05 (36~75VDC Input Voltage),
RBA30-24D12(H), RBA30-24D15(H), RBA30-48D12(H), RBA30-48D15(H)
Models: RBA30-24D05(H) (9~18VDC Input), RBA30-24D24(H)
(9~18VDC Input), RBA30-48D05(H) (18~36VDC Input)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
11/21/2017
Page 4 of 10
RBA30 SERIES
30 Watts
DC/DC Converter
Single & Dual Output
Rev A
EFFICIENCY GRAPHS
Efficiency vs. Input (Full Load)
Efficiency vs. Output Load (24Vin)
RBA30-24S05
RBA30-24S05
Efficiency vs. Input (Full Load)
Efficiency vs. Output Load (48Vin)
RBA30-48S15
RBA30-48S15
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/21/2017
Page 5 of 10
website: www.wallindustries.com • e-mail: sales@wallindustries.com
RBA30 SERIES
30 Watts
DC/DC Converter
Single & Dual Output
Rev A
MECHANICAL DRAWINGS
Through Hole Package
Note: Grid 2.54*2.54mm
Pin Out
Single
Pin
1
2
3
4
Dual
Vin
Vin
GND
Ctrl
Trim
0V
GND
Ctrl
-Vo
5
0V
6
+Vo
+Vo
Note:
Unit: mm[inch]
Pin diameter tolerances: ±0.10 [±0.004]
General tolerances: ±0.50[±0.020]
Through Hole Package with Heatsink (“H” Suffix)
Pin Out
Pin
1
Single
Vin
Dual
Vin
2
3
4
5
GND
Ctrl
Trim
0V
GND
Ctrl
-Vo
0V
6
+Vo
+Vo
Note:
Unit: mm[inch]
General tolerances: ±0.50[±0.020]
If heatsinks are being used, make sure there is
enough space for a special size in above graph
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/21/2017
Page 6 of 10
website: www.wallindustries.com • e-mail: sales@wallindustries.com
RBA30 SERIES
30 Watts
DC/DC Converter
Single & Dual Output
Rev A
Chassis Mount (“C” Suffix)
Pin Out
Pin
1
2
Single
Ctrl
GND
Vin
Dual
Ctrl
GND
Vin
3
4
5
Trim
0V
-Vo
0V
6
+Vo
+Vo
Note:
Unit: mm[inch]
Wire range: 24-12AWG
Tightening torque: Max 0.4 N∙m
General tolerances: ±0.50[
Chassis Mount with Heatsink (“CH” Suffix)
Pin Out
Pin
1
2
Single
Ctrl
GND
Vin
Dual
Ctrl
GND
Vin
3
4
5
Trim
0V
-Vo
0V
6
+Vo
+Vo
Note:
Unit: mm[inch]
Wire range: 24-12AWG
Tightening Torque: Max 0.4N∙m
General tolerances: ±0.50 [±0.020]
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/21/2017
Page 7 of 10
website: www.wallindustries.com • e-mail: sales@wallindustries.com
RBA30 SERIES
30 Watts
DC/DC Converter
Single & Dual Output
Rev A
DIN Rail Mount (“DN” Suffix)
Pin-Out
Pin
1
2
Single
Ctrl
GND
Vin
Dual
Ctrl
GND
Vin
3
4
5
Trim
0V
-V0
0V
6
+Vo
+Vo
Note:
Unit: mm[inch
Wire range: 24-12AWG
Tightening torque: Max 0.4N∙m
General tolerances: ±0.50[±0.020]
DIN Rail Mount with Heatsink (“DNH” Suffix)
Pin Out
Pin
1
2
Single
Ctrl
GND
Vin
Dual
Ctrl
GND
Vin
3
4
5
Trim
0V
-Vo
0V
6
+Vo
+Vo
Note:
Unit: mm[inch]
Wire range: 24-12 AWG
Tightening torque: Max 0.4 N∙m
General tolerances: ±0.50 [±0.020]
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/21/2017
Page 8 of 10
website: www.wallindustries.com • e-mail: sales@wallindustries.com
RBA30 SERIES
30 Watts
DC/DC Converter
Single & Dual Output
Rev A
DESIGN REFERENCE
1. Typical Application
All the DC/DC converters of this series are tested below according to the recommended circuit below. If it is required to further reduce input and output
ripple, properly increase the input & output of additional capacitors Cin and Cout or select capacitors of low equivalent impedance provided that the
capacitance is no larger than the max. capacitive load of the product.
Single Output
Voltage (VDC)
3.3/5/9
Cout
(µF)
220
100
Cin
(µF)
Dual Output
Voltage (VDC)
±5/±12/±15
±24
Cout
(µF)
220
100
Cin
(µF)
100
100
12/15/24
2. EMC Solution-Recommended Circuit
Parameter Description
24Vin
Choose according to actual input current
Model
FUSE
MOV
C0
C1
C2
48Vin
S20K30
S14K60
680µF/50V
330µF/50V
4.7µF/50V
330µF/100V
330µF/100V
2.2µF/100V
C3
LCM
CY1, CY2
Refer to Cout in Typical Application Figure
1mH, contact factory for recommendation
1nF/2KV
Note: Part ① in the figure above is used for EMS test and part ② for EMI
filtering; selected based on needs.
Parameter Description
Model
FUSE
MOV
C0
C1
C2
24Vin
Choose according to actual input current
48Vin
S20K30
S14K60
680µF/50V
2.2µF/50V
2.2µF/50V
330µF/50V
330µF/100V
2.2µV/100V
2.2µF/100V
330µF/100V
C3
C4
LDMI
CY1, CY2
Refer to Cout in Typical Application Figure
3.3µH
Notes: Part ① in the figure above is used for EMS test and part ② for EMI
filtering; selected based on needs.
2.2nF/400VAC Safety Y Capacitor
3. Application of Trim and Calculation of Trim Resistance
Calculation formula of Trim resistance:
aR2
R2-a
Vref
Vo’-Vref
up: RT =
-R3
a=
∙R1
∙R2
aR1
R1-a
Vo’-Vref
Vref
down: RT=
-R3
a=
RT is Trim resistance, a is a self-defined parameter, with no real meaning.
Vo’ for the actual needs of the up or down regulated votlage
Vout (VDC)
R1 (KΩ)
4.801
2.883
R2 (KΩ)
2.87
2.87
R3 (KΩ)
12.4
10
Vref(V)
1.24
2.5
3.3
5
9
7.500
2.87
15
2.5
12
15
24
11.000
14.494
24.872
2.87
2.87
2.87
15
15
17.8
2.5
2.5
2.5
Applied circuit of Trim (part in broken line is the interior of models)
4. Models cannot be connected in parallel to increase power.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/21/2017
Page 9 of 10
website: www.wallindustries.com • e-mail: sales@wallindustries.com
RBA30 SERIES
30 Watts
DC/DC Converter
Single & Dual Output
Rev A
MODEL NUMBER SETUP
RBA
30
-
12
S
12
C
H
Series Name
Output Power
Input Voltage
Output Quantity
Output Voltage
Package
Heatsink
24: 24VDC
48: 48VDC
S: Single
3.3: 3.3VDC
5: 5VDC
Blank: Through Hole
C: Chassis Mount
DN: DIN Rail Mount
Blank: No Heatsink
H: Heatsink
9: 9VDC
12: 12VDC
15: 15VDC
24: 24VDC
D: Dual
5: ±5VDC
12: ±12VDC
15: ±15VDC
24: ±24VDC
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/21/2017
Page 10 of 10
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号：
©2020 ICPDF网 联系我们和版权申明