SP48S12-100 [WALL]
Isolated and Regulated;型号: | SP48S12-100 |
厂家: | WALL INDUSTRIES,INC. |
描述: | Isolated and Regulated |
文件: | 总4页 (文件大小:182K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SP & SPW SERIES
Single Output
Rev F
Up to 100 Watts
Half Brick DC/DC Converter
FEATURES
• 100% Burn In
• Isolated and Regulated
• Wide Input Voltage Range
• Fixed Operating Switching Frequency
• 50, 66, 75, and 100 Watt Output Rating from Same
Package
• Short Circuit and Over Voltage Protected
• Input and Output Filtering Integral to Supply
• UL1950, cUL950, TUV EN60950 File E155800
• Industry Standard Package (2.28” x 2.4” x 0.5”) and
Footprint
• CE Mark
DESCRIPTION
The SP & SPW series of single output half brick DC/DC converters offers up to 100 watts of output power in an industry
standard package and footprint. It is intended to provide power and isolation for pc board and chassis mount applications
requiring high power density. Some features include wide input voltage ranges, positive or negative remote on/off, remote
sense, output trim, short circuit protection, and over voltage protection. Being encapsulated, these supplies have improved
thermal dissipation and protection for ruggedized environments. All models are 100% burned-in.
Size: 2.28in x 2.4in x 0.5in
(57.91mm x 60.96mm x 12.7mm)
MODEL SELECTION TABLE
Model Number
SP24S3.3-66
SP24S3.3-75
SP24S5-50
Input Voltage Range
Output Voltage
3.3V
3.3V
5V
Output Current
20A
Output Power
66W
22.7A
10A
75W
50W
SP24S5-75
5V
15A
75W
SP24S5-100
SP24S12-50
SP24S12-75
SP24S12-100
SP24S15-50
SP24S15-75
SP24S15-100
SP24S24-50
SP24S24-75
SP24S24-100
SP24S48-50
SP24S48-75
SP24S48-100
SP48S3.3-66
SP48S3.3-75
SP48S5-50
5V
20A
100W
50W
75W
100W
50W
75W
100W
50W
75W
100W
50W
75W
12V
12V
12V
15V
15V
15V
24V
24V
24V
48V
48V
48V
3.3V
3.3V
5V
4.16A
6.25A
8.33A
3.33A
5A
6.66A
2.08A
3.12A
4.17A
1.04A
1.56A
2.08A
20A
24VDC
(18-36VDC)
100W
66W
75W
22.7A
10A
50W
SP48S5-75
5V
15A
75W
SP48S5-100
SP48S6-50
SP48S6-75
5V
6V
6V
6V
20A
100W
50W
75W
100W
50W
75W
100W
50W
75W
100W
50W
75W
100W
100W
50W
75W
100W
66W
75W
50W
75W
100W
50W
50W
75W
100W
50W
75W
100W
50W
75W
100W
100W
50W
8.33A
12.5A
16.67A
4.16A
6.25A
8.33A
3.33A
5A
6.66A
2.08A
3.12A
4.17A
3.57A
1.04A
1.56A
2.08A
20A
SP48S6-100
SP48S12-50
SP48S12-75
SP48S12-100
SP48S15-50
SP48S15-75
SP48S15-100
SP48S24-50
SP48S24-75
SP48S24-100
SP48S28-100
SP48S48-50
SP48S48-75
SP48S48-100
SPW48S3.3-66
SPW48S3.3-75
SPW48S5-50
SPW48S5-75
SPW48S5-100
SPW48S9-50
SPW48S12-50
SPW48S12-75
SPW48S12-100
SPW48S15-50
SPW48S15-75
SPW48S15-100
SPW48S24-50
SPW48S24-75
SPW48S24-100
SPW48S28-100
SPW48S48-50(10)
12V
12V
12V
15V
15V
15V
24V
24V
24V
28V
48V
48V
48V
3.3V
3.3V
5V
48VDC
(36-75VDC)
22.7A
10A
15A
5V
5V
9V
20A
5.56A
4.16A
6.25A
8.33A
3.33A
5A
6.67A
2.08A
3.12A
4.16A
3.57A
1.04A
12V
12V
12V
15V
15V
15V
24V
24V
24V
28V
48V
48VDC
(18-75VDC)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/14/2016
Page 1 of 4
website: www.wallindustries.com • e-mail: sales@wallindustries.com
SP & SPW SERIES
Single Output
Rev F
Up to 100 Watts
Half Brick DC/DC Converter
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
24VDC Nominal Input
48VDC Nominal Input
48VDC Nominal Input
18
36
18
36
75
75
Input Voltage Range
VDC
Input Filter
Pi Input Filter
<16 >38VDC
<34 >78VDC(1)
20
Input Voltage Lockout
Input Reflected Ripple(2)
OUTPUT SPECIFICATIONS
Output Voltage
mAp-p
See Table
Voltage Tolerance
Line Regulation
Load Regulation
External Output Trim
Remote Sense
Output Power
1
%
%
%
%
±0.1
±0.1
±10
Up to 0.5V Power Line Drop
See Table
Output Current
See Table
Minimum Load
None Required
1.5
Ripple & Noise (20MHz bandwidth)(3)
%Vout
±5.0% Deviation
100µ/sec recovery to within ±1.0%
Transient Response
Start-Up Time
Temperature Coefficient
REMOTE ON/OFF CONTROL(12)
Standard
Active High Enable (Positive Remote ON/OFF)
Active Low Enable (Negative Remote ON/OFF)
“R” Suffix
PROTECTION
Short Circuit Protection
Over Voltage Protection
Current Limiting Inception
Thermal Overload
Continuous
Approximately 120% Vout, Self-Reseting
Approximately 125%
+110ºC Baseplate, Self-Resetting
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Humidity
Temperature Coefficient
GENERAL SPECIFICATIONS
Efficiency
-40
-55
20
+100
+125
95
ºC
ºC
%RH
%/ºC
Non-Condensing
0.01
85
%
Switching Frequency (Fixed)
400kHz ±10%
Input to Output
Input to Case
Output to Case
Input to Output
1500
100
Isolation Voltage
750
750
VDC
Isolation Resistance
PHYSICAL SPECIFICATIONS
Weight
MΩ
Approximately 4.0oz
2.28in x 2.4in x 0.5in
Dimensions (L x W x H)
Case Material
(57.91mm x 60.96mm x 12.7mm)
Non-Metallic with Aluminum Baseplate
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/14/2016
Page 2 of 4
website: www.wallindustries.com • e-mail: sales@wallindustries.com
SP & SPW SERIES
Single Output
Rev F
Up to 100 Watts
Half Brick DC/DC Converter
NOTES
1. Auto off power train protection.
2. For input reflected ripple of 20mAp-p, use an industry standard 12uH source impedance with a low ESR aluminum 33uf capacitor across input.
3. Ripple & Noise is measured with a 10uf//0.1uf across output.
4. All case, pin to case, and pin to header dimensions reference only unless otherwise noted.
5. Pin diameters are 0.04” except: those used for +Vout and –Vout are 0.08”. Pin length is 0.20” min.
6. Pin to pin tolerance ±0.01”. Pin diameter tolerance ±0.005”
7. Significant capacitive load on output may inhibit start-up and operation, consult factory.
8. All DC/DC converters should be externally fused on the front end for protection.
9. Heatsinks available, consult factory.
10. 48VDC input with 48VDC output not available in 75 and 100 watt models.
11. Through-hole instead of threaded inserts available (0.125” diameter), add suffix “TH”
12. Positive Remote ON/OFF control is standard. To order negative logic Remote ON/OFF control add the suffix “R” to the part number (Ex.
SP48S48-100R0
*Due to advances in technology, specifications subject to change without notice.
MECHANICAL DRAWINGS
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
11/14/2016
Fax 603-778-9797
Page 3 of 4
website: www.wallindustries.com • e-mail: sales@wallindustries.com
SP & SPW SERIES
Single Output
Rev F
Up to 100 Watts
Half Brick DC/DC Converter
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/14/2016
Page 4 of 4
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号:
©2020 ICPDF网 联系我们和版权申明